• 제목/요약/키워드: High delta fiber

검색결과 40건 처리시간 0.027초

키토산/카프로락탐 혼합체에 대한 수분의 영향 (Effect of Moisture on Molecular Motions of Chitosan/Polycaprotactam Blends)

  • 리아로센-쿤;훙치치;린망풍
    • 폴리머
    • /
    • 제28권5호
    • /
    • pp.433-443
    • /
    • 2004
  • 키토산과 폴리카프로락탐 (PA6) 복합체의 박막을 개미산을 사용하여 만들었다. FT-IR 분광학적 자료는 키토산의 히드록시기와 PA6의 아마이드기 사이의 수소 결합이 형성되었음을 보여주었다. 열무게분석법은 혼합체 시료는 수분을 포함하고 있음을 나타내었다. 시료 속의 물의 분산은 저장 탄성률 (E')을 크게 감소한다고 DMA 결과는 보여주었다. 혼합체 시료의 기게적 손실 탄젠트 (tan $\delta$) 자료는 $\beta$d 손실 피크가 $0^{\circ}C$ 부근에서 나타남을 보여주었다. 혼합체 시료들은 진공에서 완전히 건조하였고 그 다음 소위 w-다리를 만드는 물을 흡수할 수 있도록 높은 습도 속에 두었다. 이 시료들의 E' 자료는 비정상적으로 증가하였고 $50^{\circ}C$ 부근에서 손실 피크의 어깨에 추가적인 손실 피크가 나타났다. 건조한 조건하에서는, 40/60 혼합 비율의 키토산/PA6가 두 성분의 섞임성이 더 좋았다.

Electrospun Calcium Metaphosphate Nanofibers: I. Fabrication

  • Kim, Ye-Na;Lee, Deuk-Yong;Lee, Myung-Hyun;Lee, Se-Jong
    • 한국세라믹학회지
    • /
    • 제44권5호
    • /
    • pp.144-147
    • /
    • 2007
  • Calcium metaphosphate (CMP) nanofibers with a diameter of ${\sim}600nm$ were prepared using electrospun CMP/polyvinylpyrrolidone (PVP) fibers through a process of drying for 5 h in air followed by annealing for 1 h at $650^{\circ}C$ in a vacuum. The viscosity of the CMP/PVP precursor containing 0.15 g/ml of PVP was 76 cP. Thermal analysis results revealed that the fibers were crystallized at $569^{\circ}C$. The crystal phase of the as-annealed fiber was determined to be ${\delta}-CMP\;({\delta}-Ca(PO_3)_2)$. However, the morphology of the fibers changed from smooth and uniform (as-spun fibers) to linked-particle characteristics with a tubular form most likely due to the decomposition of the inner PVP matrix. It is expected that this large amount of available surface area has the potential to provide unusually high bioactivity and fast responses in clinical hard tissue applications.

인공해수중 GFRP의 피로특성에 관한 연구 (A study on fatigue properties of GFRP in synthetic sea water)

  • 김연직;임재규
    • 대한기계학회논문집
    • /
    • 제17권6호
    • /
    • pp.1351-1360
    • /
    • 1993
  • 본 연구에서는 수적법(hand lay up : HLU)을 이용하여 단 섬유포(chopped strand mat : CSM)형태의 유리섬유를 불포화 폴리에스테르 수지에 강화시킨 복합 적층 판을 대상으로 해수중에서 굽힘·피로시험을 실시하여 피로균열 성장거동을 관찰하고 파면관찰을 통하여 GERP의 피로특성을 검토하였다.

Application of time-of-flight near infrared spectroscopy to Satsuma mandarin

  • Tsuchikawa, Satoru;Ito, Satomi;Inoue, Kinuyo;Miyamoto, Kumi
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1626-1626
    • /
    • 2001
  • In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M_{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima $\Delta$t and the variation of full width at half maximum Δw were strongly dependent on the detection position and the wavelength of the laser beam. At, $\Delta$t and $\Delta$w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

  • PDF

물질수지를 이용한 A2O 고정생물막법에서의 호기탈질평가 (Evaluation of Oxic Denitrification in A2O Fixed Biofilm System through Mass Balance)

  • 윤조희;박승환;이상훈;김승현
    • 대한환경공학회지
    • /
    • 제22권2호
    • /
    • pp.231-239
    • /
    • 2000
  • 본 연구는 $A_2O$ 공정을 적용한 고정생물막법을 이용하여 고농도의 총무기성질소(TIN) 유입으로 인해 C/N비가 낮은 폐수를 처리하기 위하여 최적의 운전조건 탐색과 생물학적 호기탈질을 평가하였다. 혐기조와 무산소조에 세라믹 여재를 그리고 호기조에 PVC 여재를 충전한 실험장치는 C/N(TOC/TIN)비를 0.5로 일정하게 유지하고 알칼리도를 변화시켜 실험을 실시하였으며 그 결과는 다음과 같다. 유기물제거는 운전조건에 관계없이 96.0% 이상의 높은 제거효율을 얻었다. 유입수의 알칼리도를 약 1210mg/L(Run 5)로 운전하였을 때, $NH_4{^+}-N$와 총 질소 평균 제거효율은 각각 93.5%, 81.8%이었으며, 제거된 총 질소 중 64.9%가 호기조에서 생물학적 탈질에 의해서 제거되었다. 호기조에서 물질수지를 이용하여 질소와 알칼리도를 분석한 결과, 1mg의 $NO_2{^-}-N$가 탈질에 의해 제거될 때 2.49~3.46mg의 알칼리도가 생성되었다. 호기조에서의 생물학적 탈질은 ${\Delta}TOC/{\Delta}DEN$의 이론적인 비 1.22보다 낮은 0.84(Run 5)에서 일어났다.

  • PDF

Design of a Taper-Underlaid Spot-Size Converter with an Offset

  • Choi, Jun-Seok;Oh, Jin-Kyong;Lee, Dong-Hwan;Lee, Hyung-Jong;Kim, Sang-Duk
    • Journal of the Optical Society of Korea
    • /
    • 제11권1호
    • /
    • pp.40-43
    • /
    • 2007
  • We propose a taper-underlaid spot-size converter (TU-SSC) with an offset which consists of two vertically stacked taper layers. The designed TU-SSC reduces coupling loss of a high index-contrast waveguide with $1.5%{\Delta}$ to a single mode fiber from 1.5 dB to 0.27 dB. We also considered the effects of mask misalignment in the fabrication process of TU-SSC, and optimized the design of TU-SSC so that the additional loss of TU-SSC for the mask misalignment of $3{\mu}m$ in the photo-lithography process was as low as 0.13 dB.

Psychological and Physiological Responses to the Rustling Sounds of Korean Traditional Silk Fabrics

  • Cho, Soo-Min;Yi, Eun-Jou;Cho, Gil-Soo
    • Fibers and Polymers
    • /
    • 제7권4호
    • /
    • pp.450-456
    • /
    • 2006
  • The objectives of this study were to investigate physiological and psychological responses to the rustling sound of Korean traditional silk fabrics and to figure out objective measurements such as sound parameters and mechanical properties determining the human responses. Five different traditional silk fabrics were selected by cluster analysis and their sound characteristics were observed in terms of FFT spectra and some calculated sound parameters including level pressure of total sound (LPT), Zwicker's psychoacoustic parameters - loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z), and sound color factors such as ${\Delta}L\;and\;{\Delta}f$. As physiological signals, the ratio of low frequency to high frequency (LF/HF) from the power spectrum of heart rate variability, pulse volume (PV), heart rate (HR), and skin conductance level (SCL) evoked by the fabric sounds were measured from thirty participants. Also, seven aspects of psychological state including softness, loudness, sharpness, roughness, clearness, highness, and pleasantness were evaluated when each sound was presented. The traditional silk fabric sounds were likely to be felt as soft and pleasant rather than clear and high, which seemed to evoke less change of both LF/HF and SCL indicating a negative sensation than other fabrics previously reported. As fluctuation strength(Z) were higher and bending rigidity (B) values lower, the fabrics tended to be perceived as sounding softer, which resulted in increase of PV changes. The higher LPT was concerned with higher rating for subjective loudness so that HR was more increased. Also, compression linearity (LC) affected subjective pleasantness positively, which caused less changes of HR. Therefore, we concluded that such objective measurements as LPT, fluctuation strength(Z), bending rigidity (B), and compression linearity (LC) were significant factors affecting physiological and psychological responses to the sounds of Korean traditional silk fabrics.

지료의 제타전위 측정을 통한 형광증백제의 흡착 평가 (Adsorption Analysis of Fluorescent Whitening Agent on Cellulosic Fibers by Zeta Potential Measurement)

  • 이지영;김은혜;김철환;박종혜
    • 펄프종이기술
    • /
    • 제47권6호
    • /
    • pp.106-112
    • /
    • 2015
  • Many researchers have proposed analytical methods to measure the adsorption of di-sulpho fluorescent whitening agents (D-FWAs), but practical methods for D-FWA utilization in an actual paper mill have not been established. In particular, the D-FWA adsorption behavior must be monitored in paper mills to ensure the effective use of D-FWAs. This study used the zeta-potential of pulps as an indicator of the adsorption behavior of a D-FWA. We identified the relationship between the actual adsorption of the D-FWA and the zeta-potential of the pulps as a function of D-FWA addition. zeta-potential measurements were then used to analyze the D-FWA adsorption behavior under different conditions of pulp type, conductivity, and pH. The actual adsorption of a D-FWA was proportional to the ${\Delta}zeta-potential$ of the pulps (i.e., the difference between the zeta-potential of a pulp containing no D-FWA and one containing the D-FWA). The ${\Delta}zeta-potential$ of the pulps was therefore adopted for adsorption analysis. A higher adsorption of the D-FWA was observed onto Hw-BKP than onto Sw-BKP because of the shorter fiber length and higher fines content of Hw-BKP. A high conductivity and an acidic pH decreased the D-FWA adsorption because of direct effects of high ion concentrations and low pH on the D-FWA solubility. Therefore, a D-FWA must be added to Hw-BKP under low conductivity conditions and at neutral or alkaline pH to optimize the D-FWA adsorption.

충격하중을 받는 금속복합재료의 동적변형거동에 관한 연구 (Dynamic Deformation Behavior of Metal Matrix Composites Under Impact Loading)

  • 김문생;이현철
    • 대한기계학회논문집
    • /
    • 제17권7호
    • /
    • pp.1772-1782
    • /
    • 1993
  • The characteristics of metal matrix composite under dynamic tension at high strain rates up to the order of $10^3/sec$ is studied by using newly developed apparatus. The composite material processed in this research is aluminum-alumina metal matrix composites, arid fabricated by compocasting with the fiber volume fraction from 5 to 20%. The whisker and matrix material used in this paper were ${\delta}-Al_2O_3$ and Al-6061, respectively. The mechanical tests performed in this research are low and high strain rate tensile test. At low strain-rate tensile test, the modulus of elasticity and the ultimate tensile strength of the composites were improved about 77 pct. and 55 pct., respectively comparing with the unreinforced materials. At strain-rate from $10^{-3}\;to\;10^3/s$, the effect of strain-rate on the modulus, ultimate strength, flow stress is determined. Also the effect of strain rate on the modulus, ultimate tensile strength, flow stress and elongation to failures were investigated.

지방의 종류가 다른 식이의 섭취가 하지고정 흰 쥐의 근 섬유별 근 위축과 PPAR${\delta}$ 활성에 미치는 영향 (Effects of Different Types of Dietary Fat on Muscle Atrophy According to Muscle Fiber Types and PPAR${\delta}$ Expression in Hindlimb-Immobilized Rats)

  • 이호욱;박미나;이연숙
    • Journal of Nutrition and Health
    • /
    • 제44권5호
    • /
    • pp.355-365
    • /
    • 2011
  • 본 연구는 지방의 종류와 함량이 다른 식이의 섭취가 하지 고정 흰 쥐의 근육 내 화학 조성, PPAR${\delta}$ 및 관련 효소의 발현에 미치는 영향을 근육 종류에 따라 알아 보기 위해 수행되었다. 연구결과를 요약하면 다음과 같다. 1) 10일 간의 하지고정과 식이 중재에 의해 실험동물의 체중, 식이섭취량 및 혈청 지방산에는 유의적인 차이가 없었다. 2) 10일 간의 하지고정에 따라 근육 양은 하지 근육 종류에 따라, 각각 soleus 에서 약 57%, plantaris에서 약 39% 그리고 gastrocnemius에서 약 38%로 달리 감소되었다 (p < 0.01). 특히 soleus에서 가장 많은 감소 현상을 보였다. 이러한 감소 경향은 식이 지방의 종류 및 함량에 영향을 받지 않았다. 3) 10일 간의 하지고정에 따라 근육 내 조성 변화의 경우, gastrocnemius에서 분석한 근육 총 단백질량은 정상 다리(contralateral)와 비교하여 하지고정에 따라 유의적으로 감소 (CO, 41%; FO, 40%; HCO, 37%; HBT, 38%)하였다. Plantaris, gastrocnemius에서 분석한 근육 내 중성지방량의 경우에도, 정상다리와 비교하여 하지고정에 따라 plantaris(CO, 39%; FO, 27%; HCO, 38%; HBT, 35%)와 gastrocnemius(CO, 38%; FO, 34%; HCO, 33%; HBT, 34%) 모두에서 유의적으로 감소하였다. 그러나, 근 단백질량과 중성지방량의 감소 현상은 모두 식이군 간의 차이는 나타나지 않았다. 4) PPAR${\delta}$ 단백질은 하지고정에 의해 plantaris에서는 유의적으로 증가 (p < 0.05)하였고, gastrocnemius, soleus에서는 증가하는 경향을 나타내었다. PPAR${\delta}$ 단백질과는 반대로 PPAR${\delta}$ mRNA는 하지고정에 의해 plantaris에서는 유의적으로 감소 하였고, soleus에서는 FO군만 PPAR${\delta}$ mRNA 발현 양이 유의적으로 감소하였다. PPAR${\alpha}$의 경우 하지고정에 따라 두 근육에서 모두 영향을 받지 않았다. mCPT1 mRNA는 하지고정에 따라 soleus와 plantaris 모두에서 변화가 없었지만, PDK4 mRNA는 하지고정에 따라 plantaris에서 유의적으로 감소하였고, 반대로 soleus에서는 유의적으로 증가하였다. 5) PPAR${\delta}$ 단백질은 세 근육의 FO군에서 모두 크게 증가하는 경향을 보였지만, 식이에 따른 유의적인 차이를 보이지는 않았다. PPAR${\delta}$ mRNA의 경우, plantaris의 CO군과 비교해 FO군에서 mRNA 발현이 유의적으로 낮은 수준이었고, 다른 군에서는 유의적인 차이가 없었다. Soleus의 PPAR${\delta}$ mRNA는 CO군과 비교해 FO, HCO 그리고 HBT군 모두에서 발현 양이 유의적으로 낮은 수준을 보였다. 반면, PPAR${\alpha}$의 mRNA 발현은 두 근육에서 모두 식이에 의한 영향을 받지 않았다. mCPT1 mRNA 발현의 경우, plantaris에서는 CO군과 비교해 FO군에서 발현 양이 유의적으로 낮은 수준을 보였지만, 고지방 식이 군에서는 유의적인 차이가 없었다. 반대로, soleus에서는 CO군과 비교해 FO군에서 발현이 유의적으로 높은 수준을 보였지만, 고지방 식이 군에서는 CO군과 비교해 유의적인 차이는 없었다. PDK4 mRNA의 경우, plantaris에서는 CO군과 비교해 FO군의 mRNA 발현 양이 유의적으로 높은 수준을 보였다. 고지방 식이 군에서는 CO군과 비교해 발현 양의 유의적인 차이가 없었다. 한편, soleus에서는 FO군에서 발현이 낮은 경향을 보였을 뿐, 식이에 따른 mRNA 발현에는 모든 군에서 유의적인 차이가 없었다. 본 연구에서는 10일간의 하지고정에 의해서 모든 근육에서 유의적인 근 위축이 유발되었고, 이에 따라 근육 양의 감소와 함께 근육 총 단백질의 유의적인 감소가 나타났다. 하지만 근육 총 단백질과 중성지방의 유의적인 감소에도 불구하고, 하지고정에 의한 근육 내 중성지방 축적은 일어나지 않았다. 이는 하지고정에 의해 모든 근육에서 증가된 PPAR${\delta}$ 단백질이 하지고정 초기에 근육 내 중성지방의 축적을 억제했을 것으로 사료된다. 결론적으로, 하지고정에 따른 근 위축에 의해 근육 내 지질대사를 조절하는 PPAR${\delta}$의 mRNA 발현은 감소하였지만, ${\omega}$-3 PUFA를 함유한 어유 식이는 PPAR${\delta}$ 단백질 및 관련 효소의 발현 수준과 활성에 근 섬유별특성에 따라 긍정적인 영향을 줌으로써 근육 내 지질축적을 비롯한 근위축의 경감에 도움을 줄 수 있다는 가능성을 제시하였다.