• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.35-40
• /
• 2005

선박의 조종운동은 선체와 프로펠러 그리고 타의 연성 운동의 결과로서 선박 조종성능을 향상시키기 위해서는 각 요소의 적절한 평가 및 보완이 필요하다. 본 연구에서는 조종성능 향상 기법의 일례로 특수타의 일종인 플랩타 주위의 유동특성을 유동가시화 시험기법과 PIV 해석을 이용하여 알아본다.

• 한국가시화정보학회지
• /
• 제11권1호
• /
• pp.28-33
• /
• 2013

This paper describes aerodynamic characteristics of an Archimedes spiral wind turbine with various angles of attack. The range of angles was controlled from $-30^{\circ}$ (clockwise) to $+30^{\circ}$ (clockwise). The rotating speed of wind turbine at the same angle of attack in both directions was different. The reason why the-maximum rotational speed was observed at $15^{\circ}$ in clockwise direction can be explained based on angular momentum conservation. Quantitative flow visualization around Archimedes wind turbine blade was carried out between $-15^{\circ}$ (clockwise) and $+15^{\circ}$ (counter clockwise) using high resolution PIV method. The relationship between drag force and rotating speeds was discussed. From these results, optimum design on yawing system of Archimedes spiral wind turbine may provide high efficiency on small wind power system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1619-1624
• /
• 2004

Experimental study of separated flow over a NACA0012 airfoil is conducted at $Re=2{\times}10^5$ when periodic wakes pass over the airfoil. The wakes are periodically generated by circular cylinders upstream of the airfoil. The measurement of surface pressure and surface visualization at various angles of attack are carried out without and with passing wakes. Without passing wakes, a separation bubble at the leading edge of the suction surface is formed at an angle of attack, found from a local plateau in the streamwise pressure distribution and two distinct lines in the surface flow visualization. With passing wakes, however, the bubble disappears. Owing to passing wakes, the lift increases at high angle of attack and the angle of stall also increases.

• 융복합기술연구소 논문집
• /
• 제4권1호
• /
• pp.37-41
• /
• 2014

For the analysis of lifting surface at high angle of attack, a Nonlinear Vortex Lattice Method(NLVLM) was used. The NLVLM is intented to compute the interactions between lifting surfaces and separated vertical flow. The lifting surfaces are represented by a lattice of discrete vortex rings. And wakes are represented by families of non-lintersecting, semi-infinite vortex line segments. The image method also used to analyze the ground effect. It is found that vortex lines separated from lifting surfaces represent the separated flows successfully. Although the present method is applied for the rectangular wing and delta wing, extensions can be possible for the arbitrary lifting surfaces. The Present results show good agreement with experimental data.

• 한국항공우주학회지
• /
• 제34권10호
• /
• pp.61-70
• /
• 2006

마하 4 비행 조건에서 작동하는 고성능 램제트와 듀얼모드 스크램제트 엔진의 초음속 공기 흡입구 모델을 설계하였다. 배압, 받음각, 요각 등 비행 변수의 변화에 따른 내부 유동 특성을 파악하기 위하여 규슈대학교의 불어내기식 초음속 풍동을 이용한 실험을 수행하였다. 유동 가시화를 위하여 쉴리렌 기법, 오일 가시화 기법을 이용하였으며, 정량적 성능 분석을 위하여 표면 압력 및 전압력을 측정하였다. 실험의 결과는 전산 유체 해석과 비교하였다. 본 연구는 기본적이지만 찾기 힘든 고 마하수 초음속 공기 흡입구 유동의 실험 결과를 제시한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.494-499
• /
• 2011

One of the devices to prevent separated flow over a wing or a flap at high angle of attack is a vortex generator. In the present work, we numerically study the flow around a low-profile or micro vortex generator whose height is less than local boundary layer thickness which can delay separation with a minimum drag penalty owing to its very small wetted surface area. As a first step toward a parametric study to efficiently design this MVG flow control system, we simulate the flow around a single MVG on a flat plate. For the simulation, we employ OpenFOAM with Launder-Sharma ${\kappa}$-epsilon model. The analysis results are validated by comparing with experimental results of a rectangular MVG at an angle of attack of 10 degrees whose height is 20% of local boundary layer. Important results and aspects of this numerical study are discussed. We also simulate the flow around rectangular, triangular and trapezoidal MVGs and the results are compared

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.51-59
• /
• 2019

Flow forming is an eco-friendly and high-efficiency plastic deformation process with fewer chips during a process which is specifically used to manufacture seamless tubular products like tire wheels, rocket motor cases etc. On the development of mortar barrel using Inconel718 tube, some flow formed products had dimensional errors on their thickness. In this study, our purpose is to optimize the process conditions with the smallest dimensional error. In order to find an optimum process condition, 2D axisymmetric FEM simulation analyses with Taguchi method were conducted. Geometric variables (attack angle, flatting angle, roller nose radius) and operating parameters (depth of forming, feed rate) are considered as control factors. Forward flow forming with single roller was first analyzed to determine the effective factors using AFDEX software and attack angle of the roller was identified as the most influential factor. Also, the nose radius of the rollers was confirmed as a significant factor in multi-rollers flow forming system. The effect of rollers offset values are also studied and finally, we proposed optimal conditions to improve the accuracy of flow forming process with Inconel718 tube for mortar barrel manufacturing.

• 한국전산유체공학회지
• /
• 제11권4호
• /
• pp.81-89
• /
• 2006

Two dimensional turbulent flow simulations on the low Mach number - high Reynolds number flow about the NACA 4412 airfoil are carried out as the airfoil approaches a ground. It has turned out that angle of attack between 2 and 8 degrees is recommended for the airfoil to utilize the benefit of ground effect. For the large angle of attack, the increment of lift due to the ground effect is faded away and negative aerodynamic effect such as destabilizing aspect in static longitudinal stability occurs and the separation point moves to forward as the airfoil approaches a ground.

• 한국전산유체공학회지
• /
• 제1권1호
• /
• pp.98-111
• /
• 1996

The compressible laminar and turbulent viscous flows on a slender body in supersonic speed as well as subsonic speed have been numerically simulated at high angle of attack. The steady and time-accurate compressible thin-layer Navier-Stokes code based on an implicit upwind-biased LU-SGS algorithm has been developed and specifically applied at angles of attack of 20, 30 and 40 dog, respectively. The modified eddy-viscosity turbulence model suggested by Degani and Schiff was used to simulate the case of turbulent flow. Any geometric asymmetry and numerical perturbation have not been intentionally or artificially imposed in the process of computation. The purely numerical results for laminar and turbulent cases, however, show clear asymmetric formation of vortices which were observed experimentally. Contrary to the subsonic results, the supersonic case shows the symmetric formation of vortices as indicated by the earlier experiments.

• 한국항공우주학회지
• /
• 제30권7호
• /
• pp.105-112
• /
• 2002

높은 받음각 상태에 있는 연장된 앞전을 갖는 편요된 삼각날개 주위의 와류 유동 특성에 대하여 날개 윗면에서의 압력 측정을 통하여 연구하였다. 본 연구에서는 와류 유동의 물리적 현상, 특히 높은 받음각 상태에서 받음각과 옆미끄럼각이 날개 형상 주위의 공력 특성에 미치는 영향에 중점을 두었다. 실험 데이터로부터 LEX 와류가 날개와류에 유익한 효과를 부여함을 명확하게 알 수 있었다. 이는, 작은 옆미끄럼각 상태에서는 비교적 높은 받음각에 이르기까지 와류의 붕괴 없이 날개와류를 안정화시킴을 알 수 있다. 특정 범위의 받음각과 옆미끄럼각 상태에서는 롤링 모멘트가 역전되는 흥미로운 유동 현상을 관찰할 수 있었다.