• 한국작물학회지
• /
• 제31권3호
• /
• pp.318-325
• /
• 1986

논보리 수량에 미치는 기상의 영향을 구명하고자 답리작 9개 시험지에서 12개년간 수행한 올보리의 보리쌀 수양성적을 발표하고 이 시기에 조사된 수량구성요소와 기상관측치와의 관계를 검토하였던 바 몇가지 결과를 얻었기에 여기에 보고하는 바이다. 1. 보리쌀 수량은 전작에 비하여 답리작에서 감수되었고 지역간에도 차이가 현저하였으며 경남은 보리 재배에 안전성이 있었다. 2. 보리쌀 수량의 연차간 변리계수는 12.2~42.6%로서 풍ㆍ흉연간의 차이가 현저하였고, 출수기는 풍년이 흉년보다 남부가 중부보다 빨랐으며, 출수기와 수양간에는 부의 유의상관이 존재하여 출수기가 빠른 것이 증수되었다. 3. 풍년은 흉년보다 간장이 긴반면 수장은 짧은 경향이었고 수당입수는 비슷하였으나 천립중은 가벼웠으며 수수와 수량과는 고도의 정의 유의상관이 인정되어 풍ㆍ흉에 관계없이 수수가 $m^2$당 500개 이상이었던 것은 보리쌀이 10a당 250kg 이상 생산되었다. 4. 보리의 수량에 미친 온도는 풍년이 흉년에 비하여 감온성에 영향하는 영양생장기는 고온으로 교대기는 저온으로 경과되었고 감광에 지배되는 생식생장기는 비슷하였으며 월동기간의 온도와 보리 수양간에는 일정한 경향이 없었다. 5. 강우량은 풍년이 흉년보다 파종기는 적었고 유묘기에는 많았으나 월동기간에는 적었다. 4월 상순의 강우량과 논보리 수량과는 부의 유의상관이 있었는데 이 시기에 강우량이 40mm 이상이었던 것은 보리쌀이 10a당 250kg 이하로 생산되어 보리의 수량 결정적인 영향을 하있으며 4월 중순 이후에는 풍년이 흉년보다 다소 많은 경향이었다. 6. 일조시간은 풍년이 흉년보다 파종기에는 길었고 월동기간은 짧았으며 해동후 수확기까지는 긴 상태로 경과하였는데 일조시간이 보리 수량에 미친 영향은 온도 및 강우량보다 명백하지 않았다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.353-353
• /
• 2017

Rice yield of South Korea in 2015 was the highest of the last 30 years. It is important issue to establish food policy whether the historically highest yield in 2015 can be continued or just one-off event. Therefore, it is necessary to understand whether such a high yield as 2015 will be reoccurred. The aim of this study was to find out what climatic factor affect rice yield and how often these climatic factor could occur. For this study, the yield monitoring data from National Institute of Crop Science, Rural Development Administration and the meteorological data provided by Korea Meteorological Administration are used to identify the weather conditions could cause high yield, and how often these conditions occurred in the past. Our results indicated that such as high yield as 2015 could occur only when the mean sunshine hours of July and the mean sunshine hours from the end of August to early September was more than 5.1 hours and 6 hours, respectively. Mean sunshine hour of July may be related to grain number. The mean sunshine hour from the end of August to early September was presumed to relate to grain filling ratio. The relationship between monthly mean temperature and yield or yield component was not clear in this study. In this study, any cycle of high weather condition was not found. Therefore, the probability of high yield weather condition was expressed by frequency. The frequency of the sunshine hour, could make high yield, were 8/35 (23%) over the past 35 years. And the frequency of two years consecutive sunshine hour condition, which could cause high yield, was 1/35 (2.9%). The frequency of recurrence of sunshine hour making high yield within the next 5 years or 10 years after high yield weather condition were 4/35 (11.4%). After all, the high yield as much as yield of 2015 could not be one-off event. But it was not also consecutive event.

• 한국연초학회지
• /
• 제12권2호
• /
• pp.91-101
• /
• 1990

A field experiment was conducted to find out the effects of field productivity, variety and nitrogen rate on the yield, quality, chemical constituents and physical properties of burley cured leaf in three field with different productivity(Degree of field productivity: A ; high, B ; medium, C : low) during successive two years(1988~89). The yield and quality were remarkably lowered when nitrogen fertilizer being applied much in low productive field. As compared with Burley 21, KB101 showed high yield, particularly the yield of KB101 in low productive field was relatively high. The effect of nitrogen rate on the yield was somewhat different according to field productivity and production year. When the nitrogen fertilizer being applied above 22.5kg/10a, the added nitrogen had no effect on the yield. Total nitrogen content of cured leaf grown in low productive field was high while total alkaloid was low, therefore total alkaloid/total nitrogen ratio was remarkably low. The lightness, red and yellow color of cured leaf grown in low productive field was remarkably low. As compared with Burley 21, the contents of total alkaloid and total nitrogen and shatter resistance index of cured leaf was somewhat low, while the filling power, lightness, red and yellow color were slightly high. Total nitrogen content of cured leaf was increased remarkably by nitrogen addition, but total alkaloid was not increased though the nitrogen fertilizer being applied above 22.5kg/10a. The filling power and shatter resistance index of cured leaf grown in high nitrogen plot, and the lightness and yellow color were low while the red color was relatively high. It comes into question that the visual quality being increased as well as increment of yield and nitrogenous compounds by nitrogen addition in high productive field. In low productive field, it is considerable that nitrogen addition for high yield should be prohibited because it causes the decrement of yield and quality, on the contrary.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.19-19
• /
• 2017

The indica ${\times}$ japonica rice (Oryza sativa L.) cultivars released in Japan since 1980 are high-yielding. However, occasionally in these cultivars their high yield potentials cannot be realized, particularly depending on climate conditions. The objectives of this study were to identify the reason for yield instability and the critical yield component factor causing lower grain yield in these high-yielding cultivars. Standard-yield japonica, high-yielding japonica-dominant, and indica-dominant cultivars were grown in western Japan. Rough grain yield (RY) in these high-yielding cultivars ranged from 450 to $980g\;m^{-2}$, and was positively correlated with potential grain yield (PRY). By fluctuations of solar radiation, RY changed with spikelet number (SNO), and SNO was correlated with cumulative radiation during the panicle formation period of 30 days before heading. Even if higher SNO was achieved under higher radiant conditions, RY was lower than PRY. The lower grain-filling in plants bearing higher SNO resulted from a lower filling percentage of spikelets (%F, RY/PRY), and %F was strongly correlated with spikelet fertility (%S) across all cultivars. %S was highly influenced by cumulative radiation per PRY during pollen development and establishment around heading. Inhibition of assimilation by leaf removal lowered %S. Conversely, stem thinning and removal of upper panicles around heading increased %S in spikelets of the lower part of the panicle in which sterility was higher. These results suggest that limitation of assimilate-supply due to low irradiance at the spikelet-formation and flowering stages restrains the potential of the high-yielding cultivars, depending on reduction of SNO and %S, respectively.

• Journal of the Korean Data and Information Science Society
• /
• 제18권3호
• /
• pp.773-782
• /
• 2007

The statistical process control charts are very extensively used for monitoring of process mean, deviation, defect rate or reject rate. In this paper we consider a control chart to monitor the process reject rate in the high yield process, which is based on the observed cumulative probability of the number of items inspected until r defective items are observed. We first propose selection of the optimal value of r in the CPC-r charts, and also consider the usefulness of the chart in high yield process such as semiconductor or TFT-LCD manufacturing process.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.228-237
• /
• 1996

On the basis of a brief introduction of the mechanized dry farming in Heilongjiang Province, the author states the developing process from the combination of single technics of farm machinery and agronomy to the technical assembly of high yield cultivation technics and its mathematical expression. According to the main temperature accumulated zones, 5 typical comprehensive technical assembly models for the mechanized cultivation technics and their agricultural machinery systems have been listed. They are, the Heihe " 261" wheat and soybean model : the Yi'an big ridge double row film mulching corn model : the Yongchang high yield mechanized soybean and other grain crops six year rotation model for Keshan state farms. The author conclude that the application of mechanized high yield cultivation technical assembly is the key point to transform the Heilongjiang province from big agriculture to strong agriculture, we have to take " high yield , high quality , high efficiency , s stain -ability and earning foreign currency" as the general target and carry out the corresponding policy and measures for the further development of agricuture.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1339-1346
• /
• 2024

Electrorefining in molten salts is used for purifying actinides. Optimizing electrorefining is key to minimizing processing time and radiological waste. One possible way of improving electrorefining efficiency is using an AC superimposed DC waveform. This waveform has demonstrated potential benefits in aqueous solutions but has never been utilized in a molten metal, molten salt application. This work investigates the effects of using an AC superimposed DC waveform on molten bismuth electrorefining in a molten LiCl-KCl-CaCl2 eutectic. Bismuth has been identified as a potential surrogate for plutonium electrorefining and a potential cathode in electrorefining used nuclear fuel (UNF). All electrorefining runs resulted in a high purity cathode ring and high yield with exception of the run using a low-frequency, high-amplitude superimposed AC waveform, which experienced some contamination and a lower yield. The other three AC superimposed DC runs experienced an average yield 6.7 % higher than the average yield of the DC runs. The electrorefining run using the high-frequency, high-amplitude superimposed AC signal had the highest yield. It is recommended in future studies to investigate the statistical variability of electrorefining yield and current efficiency and the impact of AC superimposed DC waveforms on solidified bismuth anodes.

• Computers and Concrete
• /
• 제12권6호
• /
• pp.819-829
• /
• 2013

The objective of this study is to determine whether or not the yield line theory, an effective method widely used for slabs made of ordinary concrete, can be used also for the reinforced concrete slabs made of high-strength concrete. Flexural behavior of simply supported slabs in three different sizes were investigated under concentrated load at mid-span. Additionally, behavior of high strength reinforced concrete slabs with 50 mm and 150 mm reinforcement spacings also studied. Failure loads, deflections, experimental and theoretical failure mechanisms were evaluated. The difference between the moments based on yield line theory and experimental moments varied between 1% to 3%. Experimental and analysis results revealed that yield line analysis could conveniently be employed in the analysis of high strength reinforced concrete slabs.

• 한국작물학회지
• /
• 제15권
• /
• pp.33-59
• /
• 1974

소맥육종에 있어서 수량에 관한 선발효율을 높이기 위한 기초적정보를 얻고저 1968년부터 1971년까지 4개년에 걸쳐 작물시험장포장에서 일련의 실험을 실시하였다. 먼저 수량 및 수량관계형질의 유전력과 형질간의 상호관계를 구명하기 위하여 고정품종군과 F$_2$개체군 그리고 F$_3$계통군을 공시하였고 고정품종군으로서 시비량과 년차를 달리하여 수량 및 수량관계형질상호관계의 변동상황을 추구한바 그 결과를 요약하면 다음과 같다. 1. 공시품종들을 한국, 미국, 일본품종군으로 또 조생, 만생품종군으로 분류하여 조사한바 출수기, 간장, 수장의 유전력은 어느품종군에 있어서나 높았고 1수입수, 1,000입중의 유전력은 중정도, 그리고 1주수수와 수량의 유전력은 낮은 편이었다. 그러나 미국품종군에 있어서만은 1수입수와 수량의 유전력이 매우 낮은 값을 보였다. 2. 1,000입중과 수량간에는 만생품종군을 제외한 모든 품종군에 있서어 높은 유전상관을 보였으며 1수입수와 수량간에도 미국품종군을 제외한 모든 품종군에 있어서 높은 유전상관이 인정되었다. 3. 경로계수분절결과, 수량에 대한 직접효과는 만생품종군을 제외한 모든 품종군에 있어서 1,000입중이 가장 컸다. 4. F$_2$에 있어서는 1,000입중과 수량간에 2조합에서 모두 높은 유전상관을 보였으며 1수입수와 수량간에도 조합에 따라 차이는 있으나 비교적 높은 상관을 보였다. 5. F$_2$에 있어서 경로계수분절결과 수량구성요소들의 수량에 대한 직접효과는 별로 차이가 없었다. 6. F$_3$에 있어 수량과 높은 유전상관을 보인 것은 1,000입중과 1수입수였으며 수량에 대한 직접효과도 1수입수가 가장 컸고 1,000입중의 직접효과도 큰편이었다. 7. 유전력이 높은 출수기, 간장, 수장등의 유전력은 비료반응형품종군에 있어서나 비반응형 품종군에 있어서 시비량증가에 따른 변동이 거의 없었다. 8. 비료반응형품종군에 있어서는 1,000입중의 유전력이 그리고 비반응형품종군에 있어서는 수량의 유전력이 시비량증가에 따라 높아지는 경향을 보였다. 9. 비료비반응형품종군의 1수입수의 유전력과 1,000입중의 유전력은 비료반응형품종군의 그것보다 높았다. 10. 비료반응형품종군과 비반응형품종군에서 공히 수량과 높은 유전상관을 보인 것은 1,000입중이었으나 비료반응형품종군에 있어서 그 상관의 정도는 비료증시에 따라 낮아졌는데 비료비반응형품종군에서는 이와 반대였다. 11. 비료반응형품종군에 있어서는 수량과 1주수수간에 높은 유전상관을 보였으나 비반응형품종군에 있어서는 상관정도가 매우 낮았다. 12. 경로계수분석결과 수량구성요소들의 수량에 대한 직접효과는 비료반응형품종군에서나 비반응형품종군에 있어서나 시비량차에 관계없이 1,000입중이 가장 컸으며 비료반응형품종군의 다비구에서만 1주수수가 컸다. 13. 년차에 의한 유전력의 변동은 유전력이 높은 출수기, 간장, 수장과 1수입수, 1,000 입중등에서는 변동이 적었으며 유전력이 낮은 1주수수에 있어서 변동이 큰 편이었다. 14. 양년차에서 공히 수량과 유전상관이 높았던 형질은 1,000입중이었으며 수량에 대한 직접효과도 가장 큰 편이었다. 15. 이상의 결과로 보아 우리나라의 소맥육종에 있어서는 다수성의 선발은 1,000입중에 주목하여 선발하는 것이 선발의 효율을 높이는 방법이 될것으로 추론하였다.

• Journal of Animal Science and Technology
• /
• 제64권2호
• /
• pp.262-273
• /
• 2022

Under the four-cut system, low-lignin alfalfa (Medicago sativa L.) may extend harvesting intervals improving harvest management flexibility and producing forage products with higher nutritive values. The objective of this study was to compare forage yield and nutritive values of low-lignin and conventional alfalfa varieties when applied to six different harvest schedules in the first (2016) and second (2017) production years. There were 12 treatments of two alfalfa varieties as whole plots and six harvest schedules as subplots. Across harvest schedules, there were four cuttings in two production years. Three harvest intervals including "Standard" (high quality, HQ), "Standard+5-day" (medium quality, MQ), and "Standard+10-day" (high yield, HY) were chosen for the first cutting, and 30-day (HQ) and 35-day (HY) for the second cuttings. The third and fourth cuttings in 2016 were timed near final harvest date and in 2017 occurred at 35-day (MQ) and 40-day (HY). Variety by harvest schedule interaction was not significant, but the whole plot and sub-plot effects were significant. Hi-Gest 360 was consistently higher in nutritive value and with a similar yield as Gunner. Harvest schedules did not consistently differ in forage yield and nutritive values. HS-1 ("Standard" + 35-day + Medium Quality + High Yield) with shorter first two cutting intervals provided lower acid detergent fiber (ADF), neutral detergent fiber (NDF), higher relative feed value (RFV), and similar forage yield compared to other schedules. HS-1 had the highest economic incomes when considering RFV and yield among the six different harvest schedules.