• Journal of the Korean Electrochemical Society
• /
• v.4 no.2
• /
• pp.58-64
• /
• 2001

YSZ ($8mol\%$ yttria-stabilized zirconia)-modified LSM $(La_{0.85}Sr_{0.15}MnO_3)$ composite cathodes were fabricated by formation of YSZ film on triple phase boundary (TPB) of LSM/YSZ/gas. The YSZ coating film greatly enlarged electrochemical reaction sites from the increase of additional TPB. The composite cathode was formed on thin YSZ electrolyte (about 30 Um thickness) supported on an anode and then I-V characterization and AC impedance analyses were performed at temperature between $700^{\circ}C\;and\;800^{\circ}C$. As results of the impedance analysis on the cell at $800^{\circ}C$ with humidified hydrogen as the fuel and air as the oxidant, R1 around the frequency of 1000 Hz represents the anode Polarization. R2 around the frequency of 100Hz indicates the cathode polarization, and R3 below the frequency of 10 Hz is the resistance of gas phase diffusion through the anode. The cell with the composite cathode produced power density of $0.55\;W/cm^2\;and\;1W/cm^2$ at air and oxygen atmosphere, respectively. The I-V curve could be divided into two parts showing distinctive behavior. At low current density region (part I) the performance decreased steeply and at high current density region (part II) the performance decreased gradually. At the part I the performance decrease was especially resulted from the large cathode polarization, while at the part H the performance decrease related to the electrolyte polarization.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.63-75
• /
• 2016

For safe water supply, residual chlorine has to be maintained in tap-water above a certain level from drinking water treatment plants to the final tap-water end-point. However, according to the current literature, approximately 30-60% of residual chlorine is being lost during the whole water supply pathways. The losses of residual chlorine may have been attributed to the current tendency for water supply managers to reduce chlorine dosage in drinking water treatment plants, aqueous phase decomposition of residual chlorine in supply pipes, accelerated chlorine decomposition at a high temperature during summer, leakage or losses of residual chlorine from old water supply pipes, and disappearances of residual chlorine in water storage tanks. Because of these, it is difficult to rule out the possibility that residual chlorine concentrations become lower than a regulatory level. In addition, it is concerned that the regulatory satisfaction of residual chlorine in water storage tanks can not always be guaranteed by using the current design method in which only storage capacity and/or hydraulic retention time are simply used as design factors, without considering other physico-chemical processes involved in chlorine disappearances in water storage tank. To circumvent the limitations of the current design method, mathematical models for aqueous chlorine decomposition, sorption of chlorine into wall surface, and mass-transfer into air-phase via evaporation were selected from literature, and residual chlorine reduction behavior in water storage tanks was numerically simulated. The model simulation revealed that the major factors influencing residual chlorine disappearances in water storage tanks are the water quality (organic pollutant concentration) of tap-water entering into a storage tank, the hydraulic dispersion developed by inflow of tap-water into a water storage tank, and sorption capacity onto the wall of a water storage tank. The findings from his work provide useful information in developing novel design and technology for minimizing residual chlorine disappearances in water storage tanks.

• Journal of the Korean Society of Food Culture
• /
• v.6 no.2
• /
• pp.185-197
• /
• 1991

An eating behavior research was done with 50 females at a buffet styled restaurant during their lunch time. Of the respondents, 52.0% were professional and 54.0% were graduate school graduates. Of the respondents, 58.0% of the company were friends and 24.0% were relatives. The average time period of eating was $93.0{\pm}23.4$ minutes. The average frequency of taking food was $4.0{\pm}1.1$ and the average frequency of taking food after satiety was $1.4{\pm}0.8$. It is significant that lower frequency of food consumption was directly proportional to the age groups of respondents. The average selected food items were $30.4{\pm}7.1$ out of 175 and the average weight of the consumed food was $995.0{\pm}240.9$ g. The older age group chose a similar number of food items, but the amount of each food item was considerably less than younger. So the younger the age group was, the more they ate. The average food items at one time was $7.1{\pm}2.2$ and the average food weight time was $233.7{\pm}69.7$ g. The percentage of respondents who evaluated themselves as 'ate too much' was 70.0% and those who evaluate themselves 'ate properly' was 14.0%. Most of them were satisfied with the buffet service. The average of number of food items consumed by respondents before cooking was $50.5{\pm}8.9$. The consumption of calories and nutrients was compared with the Korean Daily Recommended Dietary Allowances. The consumed calories were 60.9% of RDAs, protein 104.4%, calcium 77.1%, iron 129.8%, vitamin A 66.5%, thiamin 96.0%, riboflavin 95.7%, niacin126.6% and ascorbic acid 112.3%. This data exceeded 1/3 of the Korean Daily RDAs tremendously and tells us extreme overeating. The energy ratio of carbohydrate: fat: protein was 51.6: 29.9: 18.5. Caloric consumption of animal food was 27.9% and the consumption rate of the other nutrients from animal food was considerably high. But the consumption rate of vitamin A was 90.9% from vegetable groups. Accoding to this study, buffet service gives some advantages. It gives customers an good opportunity to vary their food intake, which enhances eating experiences and can cause an improvemont of food habits. But overeating is a problem. Therefore, we think it is necessary for those women who have influence over their family's food selection, to have nutrition education about a desirable order of eating a meal, food selection, and health problems due to overeating at buffet styled restaurant. There should be some improvement in the management of buffet service. For example, proper temperature, texture, and freshness of the food should be maintained. Prevention of mixed food smells should be considered as well. To lower the price it is desirable to reduce the number of similar items and to use seasonal food as much as possible. A buffet styled restaurant with less food items with cheaper prices is recommended. Various traditional food should be developed for the menu items. We expect buffet services to be sutable to maintain good health and to be popular to any eater.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2009

This study has been focused on determining the chemical composition of $^{14}C$ - in terms of both organic and inorganic $^{14}C$ contents - in reactor coolant from 3 different PWR's reactor type. The purpose was to evaluate the characteristic of $^{14}C$ that can serve as a basis for reliable estimation of the environmental release at domestic PWR sites. $^{14}C$ is the most important nuclide in the inventory, since it contributes one of the main dose contributors in future release scenarios. The reason for this is its high mobility in the environment, biological availability and long half-life(5730yr). More recent studies - where a more detailed investigation of organic $^{14}C$ species believed to be formed in the coolant under reducing conditions have been made - show that the organic compounds not only are limited to hydrocarbons and CO. Possible organic compounds formed including formaldehyde, formic acid and acetic acid, etc. Under oxidizing conditions shows the oxidized carbon forms, possibly mainly carbon dioxide and bicarbonate forms. Measurements of organic and inorganic $^{14}C$ in various water systems were also performed. The $^{14}C$ inventory in the reactor water was found to be 3.1 GBq/kg in PWR of which less than 10% was in inorganic form. Generally, the $^{14}C$ activity in the water was divided equally between the gas- and water- phase. Even though organic $^{14}C$ compound shows that dominant species during the reactor operation, But during the releasing of $^{14}C$ from the plant stack, chemical forms of $^{14}C$ shows the different composition due to the operation conditions such as temperature, pH, volume control tank venting and shut down chemistry.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.1 s.51
• /
• pp.7-19
• /
• 2007

Four types of fluid inclusions are trapped within tourmaline from Daeyou pegmatite, Jangsu-Gun, Jeonllabukdo. They range $5{\sim}100\;{\mu}m$ in size and are grouped into I, II, III, and IV based on the phase behavior at the room temperature: (1) Type I inclusions are liquid-rich and NaCl equivalent salinity ranged $0{\sim}12\;wt%$, and the homogenization temperatures (Th) ranged $181{\sim}230^{\circ}C$ with eutectic temperatures (Te) $-54{\sim}-22^{\circ}C$. (2) Type II inclusions are vapor-rich and salinity ranged $3{\sim}8\;wt%$ NaCl, and Th ranged $177{\sim}304^{\circ}C$ also showing Te $-54{\sim}-29^{\circ}C$. (3) Type III inclusions contain a halite daughter mineral with $31{\sim}40\;wt%$ NaCl, Th $230{\sim}328^{\circ}C$. More than 90% of Type III homogenize by halite dissolution and are spatially associated with silicate melt inclusions. (4) Type IV inclusions are $CO_{2}$-bearing containing various daughter minerals such as sylvite and/or halite. The density of $CO_{2}$ system within the Type IV is $0.80{\sim}0.75\;g/cm^{3}$, Th $190{\sim}317^{\circ}C$, and salinity $2{\sim}35\;wt%$ NaCl. Type III fluid inclusions, considered as the earliest fluid, formed from the fluid exsolved from the crystallizing pegmatite. It is suggested that Type II fluid in the central part of tourmaline were exsolved earlier than Type I fluids in the margin indicating salinity fluctuation during the growth of tourmaline. It implies the fluctuation of the pressure since the salinity of fluid exsolved from the crystallizing melt is governed by the pressure. The last fluid was Type IV, which may be derived from the nearby limestone and metasedimentary rocks. It is suggested that Daeyou pegmatite containing muscovite without miarolitic cavities was formed by the partial melting resulted from the regional metamorphism. Subsequently, the exsolving fluids from the crystallizing melt were trapped in tourmaline at high pressure condition. The exsolved fluids contain various components such as $CaCl_{2}\;and\;MgCl_{2}$ as well as NaCl and KCl. The exsolution began at least at $2.7{\sim}5.3\;kbar\;and\;230{\sim}328^{\circ}C$ with the pressure fluctuation.

• Korean Journal of Organic Agriculture
• /
• v.27 no.3
• /
• pp.365-380
• /
• 2019

Total of 20 Holstein calves of 10 calves (3.90±0.26 month of age) born in spring (S) and 10 calves (4.10±0.30 month of age) born in fall (F) were reared in this study for 24 months and diets were divided into separate feeding of forage and concentrates (C) and TMR (T). Therefore, 4 treatments in this study were composed of CS, CF, TS and TF with the factors of diets and calving season. After parturition of heifers, all animals were fed the same diet and milk production was recorded monthly. DM intakes in growing period were influenced by calving season, and those of the animals calved in fall were higher than in those calved in spring (P<0.01), but there were no significant differences by feeding method. CP intakes and TDN intakes were significantly influenced by calving season (P<0.05) and feeding method (P<0.001), and the animals calved in fall were about 1.2% higher than those calved in spring, and the animals fed TMR were about 4.7% higher than those fed concentrates and forage separately. Average, 9th and 10th months' milk yields were significantly influenced by feeding method in which those in the treatments fed TMR (TS, TF) were higher than in separate feeding of concentrates and forage (CS, CF; average P<0.05; 9th and 10th months P<0.01). Average milk persistency was also significantly influenced by calving season (P<0.05) and feeding method (P<0.01) and those in the animals calved in fall were higher than in spring and those of the TMR fed animals were also higher than in separate feeding of concentrates and forage. Milk persistency was similar to the results of milk yield, showing statistically significant differences affected by the feeding method at 9th and 10th months of late lactation (P<0.01), and it was about 8% higher in the animals fed TMR, showing higher tendency at 7th (P=0.12) and 8th months of late lactation (P=0.09). Therefore, it is expected that postpartum milk yield and milk persistency would be higher when the hiefers are fed TMR in growing period and calved in fall. Average milk fat content was influenced by feeding method. Milk fat content of the animals fed TMR during growing period were 7.8% higher than those fed concentrates and forage separately (P<0.01). This suggests that feeding TMR during growing period influenced first postpartum eating behavior, which stabilized the rumen and resulted in the increased milk fat. At 3rd month after calving, milk fat content was lower in the animals calved in spring than in those calved in fall, suggesting that it might have been influenced by the seasonal differences. MUN showed significant differences by feeding method in which those in separate feeding of concentrates and forages were higher especially in average, 4th, 5th and 6th months (average and 4th P<0.01; 5th and 6th months P<0.05). SCC was higher in the animals fed TMR than in those fed concentrates and forage separately especially in average, 3rd and 4th months after calving (P<0.01). In conclusion, when feeding TMR during growing period and calving in fall, it was not influenced by the high temperature in summer, and it resulted in the improved milk yield, milk persistency and milk fat content.