• Composites Research
• /
• v.29 no.5
• /
• pp.256-261
• /
• 2016

In this work, we have prepared the filter papers with the pitch-based activated carbon fibers and the binder fibers using wet-laid process. The influence of the binder fiber on the porosity of the filter papers has been investigated by using nitrogen adsorption isotherms at 77 K and a scanning electron microscope (SEM). As a result, the specific surface area has increased with an decrease in the content of binder fiber. It has been shown that the optimum ratio of pitch-based activated carbon fibers and the binder fibers is 70:30, resulting in high porosity, excellent bonding strength, large specific surface area ($650.4m^2/g$) and high noxious gas removal efficiency (86.9%). In addition, it has been observed that the mean pore size distribution of the fiber papers has not been affected by the binder fiber.

• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.357-362
• /
• 2020

This study was conducted to investigate the effects of mushroom composition (0, 4, 8, and 12%) on the quality characteristics of an extruded meat analog. The meat analog blend was isolated soy protein, wheat gluten, and corn starch (50:40:10). The extrusion condition was set to 55% feed moisture, 170℃ barrel temperature, and 150 screw speed by high moisture extrusion using a twin-screw extruder equipped with a cooling die. The integrity index, hardness, cohesiveness, springiness, chewiness, and cutting strength of the meat analog increased with the increasing mushroom content, while its water holding capacity and nitrogen solubility index (NSI) decreased. The protein digestibility decreased with the increasing mushroom content, while the DPPH radical scavenging activity significantly increased. In conclusion, the incorporation of mushrooms into the investigated meat analog enhanced its texture and antioxidant level.

• Korean Journal of Weed Science
• /
• v.17 no.4
• /
• pp.368-374
• /
• 1997

Investigated ware the decomposition of mulch paper, weed occurrence, and rice growth and yield in transplanting rice culture with paper mulching in 1996 and 1997. The mulch paper were developed from domestic old corrugated container. In the experiment of 1996 where 25 percent of nitrogen fertilizer was applied as tillering fertilizer at 15 days after transplanting, it took about 28 to 40 days for the mulch paper to reach 50 percent decomposition according to types of mulch paper and fertilizer amount. The decomposition was faster in 18kg N/10a fertilization plot than in 12kg N/10a fertilization plot, and slower in the mulch paper treated with polyamidepolyamine epichlorohydrin resin(PPE) for the reinforcement of wet strength than in the mulch paper without PPE. In the experiment of 1997 where nitrogen fertilizer was not applied at tillering stage and instead 70 percent of nitrogen fertilizer was supplied as basal fertilizer, it took more than 42 days for the mulch paper(PPF treated) to reach 50 percent decomposition. Paper mulching was found to be very effective in controlling the paddy weeds at early stage of rice growth, but the efficacy, of weed control decreased especially in the mulch paper without PPE at later stage of rite growth due to the occurrence of Ludwigia prostrata in 1996. Few weeds occurred even in non-mulched plot without herbicide in 1997, rending difficulties in evaluating the efficacy of mulch paper in weed control, However, it could be deduced from the durability of mulch paper that paper mulching would have had sufficient efficacy of weed control. Rice yield was only 185kg/10a in the plot without mulching and weed control, but 657kg/10a and 771kg/10a in the paper(PPE treated) mulching plot with 12kgN/10a and 18kgN/10a, respectively, in 1996. The paper mulching plot showed rice yield similar to the weed control plot with herbicide in 1997. It would be concluded that paper mulching could ensure effective weed control and as high yield as the conventional rice cultivation with herbicidal weed control if the corresponding amount of basal nitrogen fertilizer is increased instead of omitting the nitrogen fertilizer at tillering stage.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.352-357
• /
• 1998

This experiment was conducted to find out the effects of major nutrient levels(N, P, K) on ozone susceptibility of tomato plants(Lycopersicon esculentum Mill, cv. Pink Glory). Plants were grown in water culture system. A half-strength of Hoagland's nutrient solution was considered as a standard formulation($N_{100}$ $P_{100}$ $K_{100}$). The levels of major nutrients were adjusted through addition or removal of several fertilizer salts from the standard solution. Top growth was significantly decreased at the low nitrogen level or phosphorus removal condition. P- and K-contents of leaves were greatly decreased by removal of salts containing P and K from the nutrient solution. The rate of ozone injury was significantly increased when potassium was removed. However, the influence of nitrogen and phosphorus levels or high potassium level on injury occurrence did not show statistical significance compared to the standard solution. Ozone exposure resulted in reduction of chlorophyll, and increase of ethylene production, electrolyte leakage and malondialdehyde(MDA) contents. These changes were much more enhanced in plants grown at the potassium removal solution. Whereas the activity of superoxide dismutase(SOD) was low at the potassium removal treatment and this tendency remained after ozone exposure. These results indicated that potassium nutrient level in tomato plants is closely associated with the susceptibility to ozone injury.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7555-7563
• /
• 2015

The complex formation from Zn(II) ion and 2-(2-hydroxyethylamino)-2-(hydroxymethyl)-1,3-propanediol (Monotris), Bis(2-hydroxyethyl)imino-tris(hydroxymethyl)methane(Bistris) in aqueous solution at $25^{\circ}C$ and at an ionic strength of 0.10 M have been studied potentiometrically. For the Zn(II)-Monotris system, in the Monotris (L) complex $ZnL^{2+}$, one of the hydroxyl oxygen atoms as well as the amine nitrogen of the ligand are coordinated. In basic media, the coordinated hydroxyl group is deprotonated. For the Zn(II)-Bistris system, in the Bistris(L) complex $ZnL^{2+}$, two of the hydroxyl oxygen atoms as well as the amine nitrogen of the ligand are coordinated. In basic media, one of the coordinated hydroxyl groups is deprotonated. In very high basic media, an additional hydroxyl group undergoes deprotonation. The equilibrium constants for the formation of $ZnL^{2+}$, $ZnLH_{-1}{^+}$, $ZnLH_{-2}$, $Zn_2L_2H_{-2}{^{2+}}$ and $Zn_2L_2H_{-3}{^+}$ have been determined.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.141-152
• /
• 2005

This study focused on the relationships among leaf and smoke components and sensory properties following tobacco leaf blending. A completely randomized experimental design was used to evaluate components of leaf and smoke and sensory properties for sample cigarettes with four mixtures of flue cured and burley tobacco (40:60, 60:40, 80:20 and 100:0). Eleven leaf components, six smoke components, and eight sensory properties of smoking taste were analyzed. A sensory evaluation method known as quantitative descriptive analysis was used to evaluate perceptual strength on a fifteen score scale. Raw data from ten trained panelists were obtained and statistically analyzed. Based on the MANOVA, clustering analysis, correlation matrix and partial least square (PLS) method were applied to find out which smoke component most affected sensory properties. The PLS method was used to remove the influence between explanatory variables in the leaf, smoke components derived from the results. High correlations (p<0.0l) were found among ten specific leaf and smoke components and sensory attributes. Total nitrogen, ammonia, total volatile base, and nitrate in the leaf were significantly correlated (p<0.05) with impact, bitterness, tobacco taste, irritation, smoke volume, and smoke pungency. From the results of PLS analysis, influence variables are used to explain about the correlation. In terms of bitterness, with only two explanatory variables, Leaf $NO_3$ and Leaf crude fiber were enough for guessing their correlation. In the distance weighted least square fitting analysis, carbon monoxide highly influenced bitterness, hay like taste, and smoke volume.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.5
• /
• pp.85-91
• /
• 2009

A stainless steel that contains aggressive negative ion was known to decrease the corrosion resistance. Stainless steel with super corrosion resistance was developed for improvement of corrosion resistance. Super duplex stainless steel is widely used under sever environment because of good mechanical properties and corrosion resistance. Also, Super duplex stainless steel has long life in severe environments by showing the enough strength and corrosion resistance. But duplex stainless steel is not stabilized compared to austenite stainless steel in corrosion resistance. In this study, corrosion characteristic were investigated to super duplex stainless steel with additive 0.2% nitrogen with $SiO_2$ thin films coated or no coated by sol-gel method in 3.5% NaCl. From test results, corrosion current density in the heat-treated specimen for ${\sigma}$ phase precipitation was higher than that of different heat-treated specimen. Also, $SiO_2$ colloidal-coated specimen had not occurred almost corrosion.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.4
• /
• pp.147-155
• /
• 2008

The dental orthodontic wire provides a good combination of strength, corrosion resistance and moderate cost. The purpose of this study was to investigate the effects of TiN and ZrN coating on corrosion resistance and physical property of orthodontic wire using various instruments. Wires(round type and rectangular type) were used, respectively, for experiment. Ion plating was carried out for wire using Ti and Zr coating materials with nitrogen gas. Ion plated surface of each specimen was observed with field emission scanning electron microscopy(FE-SEM), energy dispersive X-ray spectroscopy(EDS), atomic force microscopy(AFM), vickers hardness tester, and electrochemical tester. The surface of TiN and ZrN coated wire was more smooth than that of other kinds of non-coated wire. TiN and ZrN coated surface showed higher hardness than that of non-coated surface. The corrosion potential of the TiN coated wire was comparatively high. The current density of TiN coated wire was smaller than that of non-coated wire in 0.9% NaCl solution. Pit nucleated at scratch of wire. The pitting corrosion resistance $|E_{pit}-E_{rep}|$ increased in the order of ZrN coated(300 mV), TiN coated(120 mV) and non-coated wire(0 mV).

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.5
• /
• pp.353-358
• /
• 2011

In this study, ammonia removal characteristics in membrane contactor system under various operating conditions were evaluated. The mass transfer coefficient was used to quantitatively compare the effect of various operation conditions on ammonia removal efficiency. Effective removal of ammonia was possible with the tubular PTFE membrane contactor system at all tested conditions. Among the various operation parameters, contact time and solution pH showed significant effect on ammonia removal mechanism. Overall ammonia removal rate was not significantly affected by influent suspended solution concentration unlike other pressure driven membrane filtration processes. Also the osmotic distillation phenomena which deteriorate the mass transfer efficiency can be minimized by preheating of strip solution. Membrane contactor system can be a possible alternative to treat high strength nitrogen wastewater by optimizing operation conditions such as stripping solution flow rate, influent wastewater temperature, and influent pH.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.185-192
• /
• 2011

BNR process is an effective method to remove high strength nitrogen included in wastewater and piggery wastewater. There have been many former studies about the induction of nitritation which have many advantages than full nitrification and the impacting factors on nitritation. Especially, it is reported that organic matter has a relation with nitritation. In this study, laboratory sacle reactor was operated using effluent of anaerobic digester, piggery wastewater and anaerobic digester effluent of piggery wastewater. After analyzing the operating results, the impact of organic matter on nitritation was analyzed by classified COD fractions. It was showed that nitritation is affected by organic matter especially by Ss. In conclusion, organic matter should be managed not just as a single gross parameter but in a classified form.