• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.163-170
• /
• 2011

In this paper, we analyzed the phase change of 5-triangular trihedral comer reflectors by using X-band Ground-Based Synthetic Aperture Radar (GB-SAR) system. Each reflector was set as a stationary target at a different distance from the system. We obtained total 123 full-polarization images during 40 hours continuously at 20 minute interval. Results of SAR interferometric analysis showed phase changes of maximum 2 radians and followed similar pattern with atmospheric data. Through a GB-SAR phase formula that includes refractive index in the air, we performed regression analysis for refractive index as a function of atmospheric humidity, temperature and pressure. As a result, refractive index of air in X-band showed relatively high coefficient of determination with humidity and temperature (0.72 and 0.76 on average, respectively) but not so with pressure (0.34). The refractive index of air in X -band changed by 3.14\;{\times}\;10^{-5}$ during the measuring time with a humidity range of 50% ~ 90% and a temperature range of $-1^{\circ}C$ ~ $9^{\circ}C$. We expect that a total expression of refractive index of air including humidity, temperature and pressure can be calculated when more extensive data would be collected at various atmospheric conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2839-2843
• /
• 2013

In this study, the relation between the corneal refractive power and the tear break-up time(TBUT) was analyzed. The results can be effectively used in eye clinics and served as the reference on wearing the contact lenses. We had measured the radius of the corneal of university students who are in the range of 21 to 27 year-old and who don't have eye disease. The corneal refractive power was calculated by using the radius of the corneal. And TBUT is the time when the mire image is distorted first time. The relation between the corneal refractive power and TBUT in right eye was a linear as 'y=37.921-0.610x', in which the larger the refractive power of the cornea is, the shorter TBUT is(negative relationship; r=-0.462, p=0.010). The relation in left eye was also a negatively linear as 'y=41.894-0.695x'(r=-0.509, p=0.004). Consequently, in both eyes the corneal refractive power and TBUT have a negative correlation when myopia is a high. It is possible to predict TBUT, which is necessary in deciding on wear of contact lenses, by measuring the corneal radius of subjects.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.47-51
• /
• 2014

In this paper, unit cell and arrayed cover for improving the transfer efficiency of resonant wireless power transfer system is proposed. We used the characteristic of zero refractive index for focusing a magnetic field between the transmitting resonator and receiving resonator. For zero refractive index, we designed the unit cell structure that have a negative value of effective permeability. The size of proposed unit cell based on metamaterial structure is $70mm{\times}70mm{\times}3.2mm$, operating frequency is 13.56 MHz. And, the size of arrayed cover is $400mm{\times}400mm{\times}3.2mm$, is consists of 2-layers. The transfer efficiency of the proposed wireless power transfer system are 94.8 %, 93.2 %, 91.4 %, 90.8 % at 100 mm, 200 mm, 300 mm and 400 mm (distance between transmitting and receiving resonator), respectively. And proposed WPT system has a transfer efficiency high than 90 % over the overall distances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.592-598
• /
• 2017

A method for estimating the optical characteristics of ceramic materials under high temperature conditions has been applied and evaluated. For that purpose, an interface system combined with a photo-spectrometer was made to keep the samples at the required high temperature. The transmittance of the samples was measured at various temperatures. The measured transmittance data was used to estimate the refractive index using an optical simulation model in conjunction with the Sellmeier equation. The Sellmeier equation parameters were selected by trial-and-error when the transmittance recalculated using the estimated refractive index was compared with the measured transmittance. Furthermore, the estimated refractive indices were checked by a comparison with the reference data at some typical wavelengths at room temperature.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.180-186
• /
• 2021

Fluorinated polyimide has excellent light transmittance and a high optical refractive index, and is useful for producing optical-waveguide phase modulators with low optical loss and low electric power consumption. In this work, an optical-waveguide phase modulator is designed and fabricated based on a high-refractive-index fluorinated polyimide, and its characteristics are measured. An efficient protocol for characterizing the loss components of the optical waveguide is proposed, and the propagation loss of the fabricated polyimide optical waveguide is confirmed to be 0.9 dB/cm. The phase modulator requires 9.1 mW of power for phase change of π, and the response time is 290 μs, which is improved by tenfold compared to a previous demonstration of polymeric phase modulators.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5621-5627
• /
• 2014

To specify the standard of LASEK surgery, this study examined the determination factors affecting the high order aberrations (HOAs) in preoperative and postoperative LASEK. 51 adult patients (102 eyes) were evaluated at the baseline and 2 months after LASEK surgery from Nov 2011 to Jul 2012. The postoperative HOAs ($0.538{\mu}m$) were higher than the preoperative ($0.341{\mu}m$). In linear regression analysis, the refractive components that affected the postoperative HOAs were $J_0$ of corneal astigmatism (CA, 0.400), $J_0$ of refractive astigmatism (RA, 0.389), corneal astigmatism (CA, 0.282), spherical equivalent (SE, 0.239), refractive astigmatism (RA, 0.213), and pupil size (PS, 0.194) with a high R. In multiple regression, $J_0$ of CA, PS and SE were significant factors with the postoperative HOAs. In conclusion, both HOAs and $J_0$ of CA should be considered when determining the suitable factors for LASEK surgery.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.3
• /
• pp.229-235
• /
• 2005

The results of having studied the relationships between environmental factors and family history which affected distribution of ametropia according to departments are like these. The subjects of study were 920 persons who were the industrial high school students in Daejeon. First, When we searched ametropia degree and congenital factors, expecially in case of emmetropia, it showed that the students' parents who wore glasses amounted to 22.6% in ratio and the students' brothers and sisters wore glasses in 22.8%. But in case of the students of ametropia, their parents' rate of wearing glasses was 27.7%. The result showed that refractive error status of offsprings was related to their parents' eye condition. Second, We studied emmetropia and ametropia who used computer for over 3 hours in order to see relationships between refractive error and acquired factors. The emmetropias were 45.6%, while the ametropias were 70.1%. The result showed that it appeared 24.5% more in ametropia. In the end, refractive error can be greatly influenced by environmental factors. Third, The result of comparing distribution of ametropia with VDT using time according to each department showed the students of constructional information department had much more ametropia rate. They used computers than any other students in taking lessons and spent much more time than other department's students.

• Korean Journal of Materials Research
• /
• v.28 no.8
• /
• pp.452-458
• /
• 2018

This research is conducted to create a functional hydrogel ophthalmic lens containing nanoparticles. Carbon nanoparticles and PEGMEMA are used as additives for the basic combination of HEMA, MA, and MMA, and the materials are copolymerized with EGDMA as the cross-linking agent and AIBN as the thermal initiator. The hydrogel lens is produced using a cast-mold method, and the materials are thermally polymerized at $100^{\circ}C$ for an hour. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before the optical and physical characteristics of the lens are measured. The refractive index, water content, contact angle, light transmittance, and tensile strength are measured to evaluate the physical and optical characteristics of the hydrogel lens. The refractive index, water content, contact angle, UV-B light transmittance, UV-A light transmittance, visible light transmittance, tensile strength and breaking strength of the hydrogel lens polymer are 1.4019~1.4281, 43.05~51.18 %, $31.95{\sim}68.61^{\circ}$, 21.69~58.11 %, 35.59~84.26 %, 45.85~88.06 %, 0.1075~0.1649 kgf and 0.1520~0.2250 kgf, respectively. The results demonstrate an increase in refractive index, tensile strength and breaking strength and a decrease in contact angle and light transmittance. Furthermore, the visible light transmissibility is significantly increased at PEG 10 %. It is clear that this material can be used for high-performance ophthalmic lenses with wettability, ultraviolet ray blocking effect, and tensile strength.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.322-323
• /
• 2008

Multi layered thin films with ZnS/$Na_3AlF_6$/ZnS were deposited on glass substrate by thermal evaporator precess and simulated by using EMP(Essential Macleod Program). EMP is a comprehensive software package to design and analyse the optical characteristics of multi-layered thin film. ZnS and $Na_3AlF_6$ were selected as a high refractive index and low refractive index material respectively. Additionally Cu was chosen as mid reflective material. Optical properties including color effect were systematically studied. in terms of different optical thickness of low refractive index material. The optical thickness of $Na_3AlF_6$ was changed as 0.25, 0.5, 0.75 and $1.0\lambda$. The film with 0.25, 0.5, 0.75 and $1.0\lambda$. of optical thickness showed mixed color range between bluish green and red purple, yellowish green and bluish green, purple and mixed color range of green and purple respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.643-651
• /
• 2001

Fused vertical directional coupler switches (FVCSs) with switching operation induced section (SOIS) and extinction ratio enhanced section (ERES) are proposed. In these FVCSs, switching operation is achieved by changing the refractive indices of both cores in SOIS and improvement of extinction ratios larger than 30dB for both cross and bar states is achieved by controlling the asymmetry of refractive indices between both cores in ERES. In addition, the design guidelines to have high extinction ratios larger than 30dB with large tolerances of the refractive index of cores are presented.