• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.2
• /
• pp.61-65
• /
• 2009

In this paper, we report on the growth and optical characteristics of white-LED without fluorescent material. The growth of DH(double heterostructure) with AlGaN active layer was performed on a n-GaN/(0001) $Al_{2}O_{3}$ by the mixed-source HVPE and multi-sliding boat. The CRI(color rendering index) of packaging device charged in the range 72-93 with CIE chromaticity coordinates(x=$0.26{\sim}0.34$, y=$0.31{\sim}0.40$). And CCT(correlated color temperature) values was measured $5126{\sim}10406K$ with increasing injection current. The CIE point of conventional phosphor white LED shifts blue region, but cm point of non-phosphor white LED shifts opposite direction. These results show the mixed-source HVPE can be possible to newly fabricate method of phosphor free white LED with high CRI value.

• Journal of Pharmacopuncture
• /
• v.16 no.3
• /
• pp.23-29
• /
• 2013

Objectives: Dyslipidemia in diabetes mellitus is a significant risk factor for the development of cardiovascular complications. The aim of this study was to evaluate the effect of the ethyl-acetate fraction of an ethanolic extract from Streospermum suaveolens on lipid metabolism in streptozotocin (STZ)-induced diabetic rats. Methods: Diabetes was induced by intraperitonial injection of STZ (50 mg/kg). Diabetic rats were treated with an ethyl-acetate fraction orally at doses of 200 and 400 mg/kg daily for 14 days. On the $15^{th}$ day, serum lipid profiles, such as total cholesterol (TC), triglycerides (TG), low-density lipoprotein (LDL), and high-density lipoprotein (HDL), were estimated in experimental rats. The atherogenic (AI) and the coronary risk (CRI) indices were also evaluated. Results: The ethyl-acetate fraction at doses of 200 and 400 mg/kg significantly (P < 0.001) and dose-dependently reduced serum cholesterol, triglycerides and LDL, but increased HDL towards near normal levels as compared to diabetic control rats. The fraction also significantly (P < 0.001) lowered the atherogenic index (AI) and coronary risk index (CAI) in a dose-dependent manner. Conclusion: The present study demonstrated that the ethyl-acetate fraction of Stereospermum suaveolens exhibits a potent antihyperlipidemic activity in hyperglycemic rats and suggests that the plant may have therapeutic value in treating the diabetic complication of hyperlipidemia.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.59-68
• /
• 2023

Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.35-38
• /
• 2015

LEDs are considered to be an alternative for enhancement of energy efficiency, applied for numerous areas such as display, automotive headlight not only lights. Yellow phosphor is generally utilized with blue LEDs to generate WLED, $Y_3Al_{5}O_{12}:Ce^{3+}$ is typically used as the yellow phosphor. The phosphor, mixed with epoxy resin, has been used by being spread and hardened on the blue LED chip. This paste-based packaging gives rise to problems of degradation of phosphor by heat and decrease of luminous efficiency. Although phosphor plate is used instead of the epoxy-phosphor mixture to solve these problems, loss of luminous efficacy by total internal reflection inside the plate also should be solved. In this study, we coated the side of the plate with silver as one of the solution.

• Archives of design research
• /
• v.6 no.1
• /
• pp.11-22
• /
• 1993

The purpose of this study was to provide basic information for establishment of a desirable design promotion policy drive by research and analysis of recognition to design by consumers (including students) and designers and their level, merchandise evaluation evaluation and obstructing factors in revitalization of designs. To implement such purpose as referred to hereinabove, research was made by introduction of questionaires which were distributed to 500 persons of consumers group and 350 individuals of registered designers in Seoul, and for analysis of the data, density and percentage (%) were obtained by use of SAS Package and the dispersed analysis and correlationship were added for necessary parts. The result of study is summarized as follows; (l)The consumers remind the design as costume (21%) and molding (20%), and the designers remind it as creativity (27%) & molding (14%) respectively and the reminding of design by the two groups was indicated very simi lar. (p < 0.001) (2)As per the recogni tion of roles by the designers the research has highly indicated as contribution to improving living standards or development of economy & industry, and also indicated that it creates excessive consumption with sti$$\mu$ative manner. (3)The design reacts as an important parameter in selecting cri teria of merchandises and deciding factors for purchasing and also, in enhancement of competitive power of merchandise impact of design (2.36) was regarded very high. (4)The Korean-made home appliances in image is assessed as vulnerable than that of Japanese products, and the product designing level is also shown difference from advanced countries (1.36), but has indicated as somewhat better than those competitive nations (0.51) (5)The satisfaction to design policy of the Gov't is very low (1.69) and they recommended for new establishment of Policy undertaking department within the Gov't and indicated reasearch & development of design as the major issue. In regard to the above I'd like to emphasize the design industry $$\mu$t be dealt with the national level as a whole in order to promote thereof.

• Journal of the Korean Ceramic Society
• /
• v.51 no.6
• /
• pp.533-538
• /
• 2014

Today, silicon and epoxy resin are used as materials of conversion lenses for white LEDs on the basis of their good bonding and transparency in LED packages. But these materials give rise to long-term performance problems such as reaction with water, yellowing transition, and shrinkage by heat. These problems are major factors underlying performance deterioration of LEDs. In this study, in order to address these problems, we fabricated a conversion lenses using glass, which has good chemical durability and is stable to heat. The fabricated conversion lenses were applied to a remote phosphor type. In this experiment, the conversion lens for white LED was coated on a glass substrate by a screen printing method using paste. The thickness of the coated conversion lens was controlled during 2 or 3 iterations of coating. The conversion lens fabricated under high heat treatment temperature and with a thin coating showed higher luminance efficiency and CCT closer to white light than fabricated lenses under low heat treatment temperature or a thick coating. The conversion lens with $32{\mu}m$ coating thickness showed the best optical properties: the measured values of the CCT, CRI, and luminance efficiency were 4468 K, 68, and 142.22 lm/w in 20 wt% glass frit, 80 wt% phosphor with sintering at $800^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1771-1778
• /
• 2015

The study aimed to investigate the anti-obesity effects of 1% Rhus verniciflua vinegar (RV) supplementation in high-fat-diet (60% fat)-induced obese rats. A total of 50 4-wk-old male Sprague-Dawley rats were fed normal chow diet or maintained on high-fat diet (HFD) for 12 weeks to induce obesity and were then randomized into five groups as follows: normal diet+ultra-pure water (CON), HFD+ultra-pure water (OB-DW), HFD+1% acetic acid (OBAA), HFD+1% RV (OB-RV), and HFD+0.1% caffeine (OB-CF). AA was used as a control for RV, and caffeine was used as a positive control due to its weight reducing effect. After 2 months, body weight, organ and adipose tissue weights, serum lipids, hepatic lipids, adipocyte size, and cell number per spot level were analyzed. As a result, food efficiency ratio, abdominal adipose tissue weight, serum levels of total cholesterol, triacylglycerol, free fatty acids, coronary artery index, and fecal lipid were significantly reduced in the RV treatment group. In this study, we found that dietary RV improved obesity by increasing lipid excretion and reducing lipogenesis. These results suggest that RV has potential as a functional anti-obesity food.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.737-743
• /
• 2014

This paper dealt with a retrofit high power LED searchlight to replace conventional 1kW halogen searchlights. The design specification meets KDS 6230-1046-1 and KS V 8469. An optical lens with the beam angle of $6^{\circ}$ was used to meet the luminous intensity of 800,000cd at $0^{\circ}$ in horizontal line. Heat dissipation of the LED searchlight adopted a free air cooling type which does not use a fan or a heat-pipe. From the test results, power consumption of the prototype LED searchlight was 148W which was saved by 85% comparing a halogen searchlight of 1kW. Luminous intensity was 945,000cd at $0^{\circ}$ in horizontal line, satisfying KS V 8469. Luminous efficacy was improved by 4.7 times higher than that of the halogen searchlights. Beam angle, color temperature, and color rendering index(CRI) was $5.4^{\circ}$, 5,500K, and 70, respectively. Surface temperature of the LED searchlight was below $60^{\circ}C$ and surrounding temperature of the SMPS installed inside was below $50^{\circ}C$ which were satisfied with the IEC 60092-306.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.443-454
• /
• 2013

Various metal ions (transition and base metals) incorporated MCM-41 catalysts can be synthesized using colloidal and soluble silica with non-sodium involved process. Transition metal ion-typically $V^{5+}$, $Co^{2+}$, and $Ni^{2+}$-incorporated MCM-41 catalysts were synthesized by isomorphous substitution of Si ions in the framework. Each incorporated metal ion created a single species in the silica framework, single-site solid catalyst, showing a substantial stability in reduction and catalytic activity. Radius of pore curvature effect was investigated with Co-MCM-41 by temperature programmed reduction (TPR). The size of metallic Co clusters, sub-nanometer, could be controlled by a proper reduction treatment of Co-MCM-41 having different pore size and the initial pH adjustment of the Co-MCM-41 synthesis solution. These small metallic clusters showed a high stability under a harsh reaction condition without serious migration, resulting from a direct anchoring of small metallic clusters to the partially or unreduced metal ions on the surface. After a complete reduction, partial occlusion of the metallic cluster surface by amorphous silica stabilized the particles against aggregations. As a probe reaction of particle size sensitivity, carbon single wall nanotubes (SWNT) were synthesized using Co-MCM-41. A metallic cluster stability test was performed by CO methanation using Co- and Ni-MCM-41. Methanol and methane partial oxidations were carried out with V-MCM-41, and the radius of pore curvature effect on the catalytic activity was investigated.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.76-76
• /
• 2001

The objective of this study was to optimize the vitrification method of in vitro produced bovine embryos. Thus, in vitro produced embryos at 8 cell, morula and blastocyst stages were vitrified on electron microscope grids (EM grids) or in open pulled straws (OPS) with EG5.5 (5.5 M ethylene glycol, 1.0 M sucrose and 10% FBS in m-DPBS medium) freezing solution and their survival rates after thawing were compared. The embryos on EM grids or in OPS were briefly exposed to EG5.5 freezing solution and plunged directly into liquid nitrogen within 30 to 35 sec. Post-thawed embryos were serially diluted in 0.5, 0.25 and 0.125 M sucrose in m-DPBS, each for 1 min, and then cultured in CRI aa medium supplemented with 10% FBS. Embryonic survival rate was assessed as re-expanded and hatched rates of those embryos after warming. The rates of re-expansion embryos did not significantly different between EM grid (8 cell: 42.10%, morula: 66.66% and blastocyst: 77.08%) and OPS (8 cell: 47.36%, morula: 61.90% and blastocyst: 83.33%) methods. In addition, the hatched rates in EM grid (8 cell: 31.57%, morula: 57.14% and blastocyst: 72.91%) were similar to those in OPS (8 cell. 34.21%, morula: 50.00% and Blastocyst: 77.08%). Interestingly, even at the same blastocyst stage, the in vitro survival of day 7 embryos (EM grid: 79.48 and OPS: 87.18%) was higher than those of day 8 embryos (EM grid: 72.10 and OPS: 82.06%). The total cell number of blastocyst developed in vitro after vitrification was examined with Hoechst 33342 staining to compare the embryo quality among different treatment groups. The total cell number of blastocyst was not significantly different between vitrified groups (EM grid: 162.4$\pm$8.0 and OPS: 158.4$\pm$7.1) and unvitrified control (168.0$\pm$5.6). These results indicate that both vitrification containers can provide the high rate of embryo survival. Moreover, the OPS container may not need a cap to protect the container from floating after immersion in L$N_2$. Therefore, this study suggest that bovine embryos can be cryopreserved easily, effectively and successfully by vitrification method using EM grid or OPS with EG5.5 freezing solution. In the future, the Pregnancy rate would be investigated after transfer of our vitrified embryos into the appropriated recipients.