• Phonetics and Speech Sciences
• /
• v.10 no.4
• /
• pp.163-171
• /
• 2018

A mixed dysarthria with combinations of hypokinetic, ataxic, and spastic components is a common clinical feature of multiple system atrophy (MSA). Due to the rapid progress of dysarthria after diagnosis, people with MSA experience difficulty with verbal communication, which eventually affects their quality of life negatively. In this study, SPEAK $OUT!^{(R)}$, an intensive 1:1 treatment of dysarthria for improving functional communicative ability, was provided to twelve people with MSA. To evaluate the efficacy of SPEAK $OUT!^{(R)}$ in people with MSA, aerodynamic, acoustic, and perceptual analyses were conducted. Pre-and post-therapy data included maximum phonation time, vocal intensity, and fundamental frequency during /a/ sustained phonation and passage reading; frequency range between high /a/ and low /a/ phonation; jitter, shimmer, and HNR for vocal quality; speech rate during passage reading; and perceptual evaluation scores for articulation precision and intonation. The participants achieved statistically significant improvement in vocal intensity, pitch range, vocal quality, speech rate, and speech intelligibility. In conclusion, SPEAK $OUT!^{(R)}$ is a feasible treatment for people with MSA to efficaciously improve their speech ability.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.507-517
• /
• 2022

The PhotoAcoustic Microscopy (PAM) has been proved to be a useful tool for biological and medical applications due to its high spatial and contrast resolution. PAM is based on transmission of laser pulses and reception of PA signals. Since the strength of PA signals is generally low, not only are high-performance optical and acoustic modules required, but high-performance electronics for imaging are also particularly needed for high-quality PAM imaging. Most PAM systems are implemented with a combination of several pieces of equipment commercially available to receive, amplify, enhance, and digitize PA signals. To this end, PAM systems are inevitably bulky and not optimal because general purpose equipment is used. This paper reports a PA signal receiving system recently developed to attain the capability of improved Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR) of PAM images; the main module of this system is a low noise, wideband signal receiver that consists of two low-noise amplifiers, two variable gain amplifiers, analog filters, an Analog to Digital Converter (ADC), and control logic. From phantom imaging experiments, it was found that the developed system can improve SNR by 6.7 dB and CNR by 3 dB, compared to a combination of several pieces of commercially available equipment.

• Phonetics and Speech Sciences
• /
• v.7 no.4
• /
• pp.85-92
• /
• 2015

This study aimed to establish characteristics related to voice and speech through the natural base frequency analysis of esophagus vocalization. In the study, 8 subjects were selected for esophagus vocals, and 10 other subjects were selected for a control group. MDVP(Multi-dimensional Voice Program, Model 4800, USA, 2001), Multi Speech(Model 3700, Kaypantax, USA, 2008) were used as experiment equipment. The speech samples selected for evaluation were vowels and sentences (both declarative and interrogative). For acoustic analysis, the intonation form of fo, jitter, energy, shimmer, HNR, and intonation patterns of the speech sample were measured. The results were as follows: First, the natural intrinsic frequency of extended vowels in the esophagus vocal group was lower than the frequency in the normal vocal group. In particular, the intrinsic frequency difference for high vowel /i/ was much greater than the frequency difference for low vowel /a/. Second, the jitter values of the esophagus vocal group were higher than the control group. In particular, there was a large difference between the jitter values for /a/ and /i/, with the jitter values being highest for /i/. Third, there was no significant difference in vocal strength between the esophagus vocal patient group and the control group. Fourth, the shimmer values of the voices in the esophagus vocal group were higher than shimmer values in the control group. In particular, there was a large difference in shimmer values for low vowel /a/. Fifth, the HNR values of the esophagus vocal group were showed significantly lower than the control group. In particular, the largest difference in HNR values between the two groups was for high vowel /i/. Sixth, the pitch contours of interrogative and declarative sentences of the esophagus vocal patient group showed a different form or only had with small differences compared to the pitch contours of the normal vocal group, thus presenting an inconsistent pattern.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.227-233
• /
• 2002

The IME(implantable middle ear) system is Promising due to its ability to free from sound feedback and Produce a good sound quality and intelligibility with low distortion even if it is operated with high gain for severe hearing impaired. The differential electromagnetic vibration transducer. which was developed for using in IME system and has two small magnets attached the same Pole facing in the coil. is not influenced by environmental external magnetic field. Besides, it has high vibration efficiency and good frequency response characteristics. In this Paper, using acoustic model of the transducer and ear model of normal Person. the signal transfer characteristics of the IME system are analyzed and investigated From the differences of the characteristics between normal ear and the IME system, it is Possible that design of the IME system that have the signal transfer characteristics similar to normal person's ear.

• Korean Journal of Remote Sensing
• /
• v.11 no.3
• /
• pp.129-145
• /
• 1995

SeaBeam2000, a multibeam echo sounder, is a new generation seabed mapping system of which a single swath covers an angular range of -60.deg. to 60.deg. from the vertical direction with 121 beams. It provides high-density and high-quality bathymetric data along with sidescan acoustic data. The purpose of the research is to develop a system for processing multibeam underwater acoustic and bathymetric data using digital signal processing techniques. Recently obtained multibeam echo sounder data covering a survey area in the East Sea of Korea ($37{\circ}$.00'N to $37{\circ}$30'N and $129{\circ}$40'E to $130{\circ}$30'E) are preliminarily processed using the developed system and reproduced in the raster image format as well as three dimensionally visualized form.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.7-11
• /
• 2006

In this paper, it is reported that film-bulk-acoustic resonator with high c-axis oriented AIN film on $Mo/SiO_2/Si(100)$ using metal-organic-chemical-vapor deposition was fabricated. The resonant frequency and anti-resonant frequency of the fabricated resonator were observed with 3.189[GHz] and 3.224[GHz], respectively. The quality factor and the effective electromechanical coupling coefficient(${k_{eff}}^2$) were measured with 24.7 and 2.65[%], respectively. The conditions of AIN deposition were substrate temperature of $950[^{\circ}C]$, pressure of 20Torr, and V-III ratio of 25000. A high c-axis oriented AIN film with $4{\times}10^{-5}[\Omega{cm}]$ resistivity of Mo bottom electrode and $4[^{\circ}]$ of AIN(0002) full-width at half-maximum(FWHM) on $Mo/SiO_2/Si(100)$ was grown successfully. The FWHM value of deposited AIN film is useful for the RF band pass filter specification for GHz-band wireless local area network.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.4
• /
• pp.100-106
• /
• 1993

A study on optimizing the friction welding of copper(C1100) to aluminium(A1050) for developing the electrical sleeve was experimentally carried out and also on real-time nondestructive evaluation of the friction weld quality (strength) was accomplished by acoustic emission technique. The results obtained are summarized as the following ; 1) The heating upset $U_1$(mm) or total upset U(mm) tends to increase according to the increase of heating time $t_1$(sec). The relations between $U_1$ and $t_1$ or U and $t_1$are computed as follows when n=2000rpm, $P_1$=4, $P_2$=8kgf/$mm^2$, and $t_2$=6sec. U=1.6$e^{0.39t_1}$ $U_1$=3.65$e^{0.25t_1}$. 2) It was notified that the proper welding conditions by considering on both strength with more than 100% joint effieciency and toughness are heating time of 1.5-2.25 sec under n=200rpm, $P_1$=4, $P_2$=8kgf/$mm^2$, $t_2$=6sec. 3) It was confirmed that both AE total counts(N, counts) and the weld tensile strength (${\sigma}$, kgf/$mm^2$) of the welded joints increase as the increase of heating time, respectively, the relations between N and $t_1$, ${\sigma}$ and $t_1$ are computed from data points by regression analysis using the least square method as follows in case of the above proper condition ; N=50108+23917(ln $t_1$)${\sigma}$$=11.85+2.06(ln $t_1$). 4) Both empirical and calcularated equations of relationship between .sigma. and N are very coincident with a high reliability, as the following in case of the above proper welding condition ; Calculated : ${\sigma}$=0.00008N+7.5 Empirical :${\sigma}$= $8.17e^{0.0000072N}$. 5) It was confirmed that the real-time nondestructive weld strength evaluation for friction welding of copper(C1100) to aluminium(A1050) could be possible by acoustic emission technique.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.211-216
• /
• 2016

Al alloys are useful materials having high specific strength and are used in machining of parts having thin-walled structures for weight reduction in aircraft, automobiles, and portable devices. In machining of thin-walled structures, it is difficult to maintain dimensional accuracy because machining deformation occurs because of cutting forces and heat in the cutting zone. Thus, cutting conditions and methods need to be investigated and cutting signals need to be analyzed to diagnose and minimize machining deformation and thereby enhance machining quality. In this study, an investigation on cutting conditions to minimize machining deformation and an analysis on characteristics of cutting signals when machining deformation occurs are conducted. Cutting signals for the process are acquired by using an accelerometer and acoustic emission (AE) sensor. Signal characteristics according to the cutting conditions and the relation between machining deformation and cutting signals are analyzed.

• Phonetics and Speech Sciences
• /
• v.3 no.4
• /
• pp.45-53
• /
• 2011

Flemming and Johnson (2007) claim that there is a fundamental distinction between the mid central vowel [ə] and the high central vowel [?] in that [ə] occurs in an unstressed word-final position while [?] appears elsewhere. Compared to English counterparts, Korean [ə] and [?] are full vowels and they have phonemic contrast. The purpose of this paper is to explore the acoustic quality of two English reduced vowels produced by Korean learners and native speakers of English in terms of their two formant frequencies. Sixteen Korean learners of English and six native speakers of English produced four types of English words and two types of Korean words with different phonological and morphological patterns. The results show that Korean learners of English produced the two reduced vowels of English and their Korean counterparts differently in Korean and English words.

• Phonetics and Speech Sciences
• /
• v.1 no.4
• /
• pp.105-109
• /
• 2009

This thesis describes the method for well voice announcement using the TTS(Text-To-Speech) technology in the shop music broadcasting service. Offering a high quality TTS sound service for each shop requires a great expense. According to a report on the architectural acoustics the room acoustic indexes such as reverberation time and early decay time are closely connected with a subjective awareness about acoustics. By using the result the customers will be able to recognize better the voice announcement by applying sound effect to speech files made by TTS. The result of an aural comprehension examination has shown better about almost all of the parameters by applying reverb effect to TTS sound.