• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.2069-2074
• /
• 2007

The 27Al multiple quantum magic angle spinning (MQMAS) nuclear magnetic resonance (NMR) spectra of mordenite zeolites were simulated using the point charge model (PCM). The spectra simulated by the PCM considering nearest neighbor atoms only (PCM-n) or including atoms up to the 3rd layer (PCM-m) were not different from those generated by the Hartree-Fock (HF) molecular orbital calculation method. In contrast to the HF and density functional theory methods, the PCM method is simple and convenient to use and does not require sophisticated and expensive computer programs along with specialists to run them. Thus, our results indicate that the spectral simulation of the 27Al MQMAS NMR spectra obtained with the PCM-n is useful, despite its simplicity, especially for porous samples like zeolites with large unit cells and a high volume density of pores. However, it should be pointed out that this conclusion might apply only for the atomic sites with small quadrupole coupling constants.

• Journal of the Optical Society of Korea
• /
• v.19 no.3
• /
• pp.217-221
• /
• 2015

Developing a metallization that has low cost and high efficiency is essential in solar-cell industries, to replace expensive silver-based metallization. Ni/Cu two-step metallization is one way to reduce the cost of solar cells, because the price of copper is about 100 times less than that of silver. Alkaline electroless plating was used for depositing nickel seed layers on the front electrode area. Prior to the nickel deposition process, 2% HF solution was used to remove native oxide, which disturbs uniform nickel plating. In the subsequent step, a nickel sintering process was carried out in $N_2$ gas atmosphere; however, copper was plated by light-induced plating (LIP). Plated nickel has different properties under different bath conditions because nickel electroless plating is a completely chemical process. In this paper, plating bath conditions such as pH and temperature were varied, and the metal layer's structure was analyzed to investigate the adhesion of Ni/Cu metallization. Average adhesion values in the range of 0.2-0.49 N/mm were achieved for samples with no nickel sintering process.

• Korean Journal of Health Psychology
• /
• v.14 no.2
• /
• pp.277-292
• /
• 2009

This study investigated the responses of the autonomic nervous system of individuals with Type D personality during an acute stressful situation. Twenty-three female students of Type D personality and 23 female students with non-Type D personality. Stroop Color-Word Task was used to induce a stressful situation, heart rate variability (HRV) was used to measure the responses of the autonomic nervous system during the baseline, acute stress, recovery periods. To analyze the data, the repeated measures analysis of variance was used to compare the autonomic nervous system of the Type D group to that of the non-Type D group. Regression analysis is used to determine if the Type D scale and stress vulnerability predicted the activities of the autonomic nervous system during the baseline period. The results of this study demonstrated that the Type D group's normalized low frequency (LF norm) and ratio of low frequency to high frequency (LF/HF ratio) were higher than those for the non-Type D group, while its normalized high frequency (HF norm) was lower than that for the non-Type D group in all three periods. There were no statistically significant differences among the three periods in terms of LF norm, HF norm, and LF/HF ratio in the Type D group. The study demonstrated that the total scores of the Type DS-14 and scores of social inhibition and negative affect were independent predictors of LF norm and HF norm during the baseline. The Type D group showed increased activation of the sympathetic nervous system and/or decreased activation of the parasympathetic nervous system. These results support the hypothesis that the Type D personality is vulnerable to the stress. Also, the highly activated sympathetic and/or lowly activated parasympathetic nervous systems, which were observed in the Type D group during the baseline, indicated that the Type D individual is susceptible to psychosomatic disorders.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.919-922
• /
• 1997

In this study, the amount of WC and group N elements of Ti(C, N) cermet tool was investigated. The composition of WC was changed from 5 to 20% to determine the effect of WC on the cutting performance of cermet tool. The more WC was added, the longer the tool life of the cermet tool was. The cermet with 20% WC showed the best fracture toughness. The effect of group N elements ; ZrC, ZrN and HfC was also investigated by adding each of them to manufacture the cermet tool with fixed 14% WC composition. The cermet with 1% group N ZrC and 14% WC showed the best cutting performance among the investigated cermet tools.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.7
• /
• pp.1042-1048
• /
• 1990

The approximations of charge relationships at normally doped semiconductor interfaces were qualitatively derived basis on electrical neutrality conditions. Effects of ion adsorptions, activation processes, interfacial structures, rectifying phenomena, and effects of surface potential barriers at the p- and n-Si/CsNO3 aqueous electrolytes, and the p-Si/(1HF:3HNO3:6H2O) electrolyte solutions were investigated using a cyclic voltammetric method. The space charge acts the most important role for the pn junction structures, the rectifying phenomena, and the activation processes. The Current-Voltage (I-V) characteristics curves significantly depend on developing of the Helmholtz double layers and charging of the show surface states during the activation processes. A linear Current-Voltage characteristics region was observed at the p-Si/(1HF:3HNO3: 6H2O) electrolyte solution interface.

• Electronics and Telecommunications Trends
• /
• v.21 no.2 s.98
• /
• pp.161-169
• /
• 2006

IT 839 정책 중 하나인 RFID는 기업의 수요 예측, 생산, 재고, 유통의 관리, 상점에서의 제품 판매 방식을 변화시킨다는 비전을 제시하고 있다. 향후 그 시장 규모가 막대할것으로 전망되고 있다. 본 고에서는 IDTech사의 RFID 구축사례에 대한 심층분석을 통해 현재 실제 시장 현황을 살펴보았다. IDTech사의 RFID 구축 데이터베이스에 의해, RFID 구축사례가 가장 많은 국가는 미국으로 나와 있으며, 전세계적으로 RFID가 가장많이 적용 되 어진 분야는 소매 및 소비재 분야로 나타났다. 가장 많이 사용 되 어지는 주파수 대역은 HF(13.56MHz)였다. 태그의 형태로는 라벨이 가장 많은 비중을 차지하는것으로 나타났다. HF(13.56MHz)와 LF(125~135kHz) 방식은 모든 국가에서 활용되고 있으나 Microwave(2.45GHz)와 UHF(868~960MHz)의 비중도 상대적으로 높게나타났다.

• Korean Journal of Plant Resources
• /
• v.27 no.6
• /
• pp.642-649
• /
• 2014

The antioxidant potentials of the methanol extract and its various fractions from Agrimonia pilosa Ledeb were measured as 1,1-diphenyl-2-picrylhydrazyl (DPPH), and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radical scavenging abilities as well as the reducing power decreasing NO in vitro. The methanol extract of Agrimonia pilosa Ledeb showed significantly strong scavenging effects on free radicals of DPPH, ABTS, and NO. Hexane fraction (HF), ethyl acetate fraction (EF) and n-butyl alcohol fraction (BF) were prepared by solvent fractionation. By comparison of polyphenol contents among BF and HF, EF with high polyphenol contents showed the highest DPPH, ABTS, and NO scavenging effects with the value of 50.2%, 80.4%, and 65.7%, respectively, at the highest tested dose. HPLC analysis revealed the presence of various phenolic compounds in EF of Agrimonia pilosa Ledeb. These results suggest that EF could be considered as natural antioxidant sources and dietary nutritional supplements to prevent oxidation-related diseases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1290-1295
• /
• 1988

Theoretical considerations in the development of new cutting tool materials for high speed machining is presented. The progressive wear of cutting tools is assumed to consist of the abrasive and solution components as major modes. Theoretical calculations of relative wear rates between various tool materials based on the two modes are possible using their hardness and solubility data. Assuming cementite as the major hard particles in machining steels, relative wear rates of possible tool materials were calculated. The results indicate that $Al_{2}$O$_{3}$ in oxides, HfN in nitrides and HfC in carbides are the optimal tool materials from the view point of mechanical and thermochemical wear resistance. And several methods for improving the fracture toughness of the above tool materials are suggested.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.198-202
• /
• 2002

$HfO_2$films were grown on Si substrate in the temperature range $250~550^{\circ}C$ using metal organic chemical vapor deposition (MOCVD) technique for a gate dielectric. Hafnium tart-butoxide and Oxygen gas were used as precursors and N2 was used as carrier gas. Impurity distribution and film structure(including interfacial layer) were studied at the deposition temperature range between 25$0^{\circ}C$ and $550^{\circ}C$. The growth rate and impurty distribution decreased with increasing temperature. The electrical properties of $HfO_2$were investigated with C-V, 1-V method and showed it has a good properties as a gate dielectric.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.8
• /
• pp.823-827
• /
• 2000

Gas-Phase reactions of methyl and ethyl nitrites with anionic nucleophiles of SH-, F- and OH- are investigated theoretically at the MP2/6-311+G* level. The SN2 processes are all highly exothermic and proceed with a typ-icaI double-weIl reaction coordinate profile. The elimination reactions of methyl nitrite with SH- and F- are double-well energy surface processes,with stabilizedproduct complexes of NO-...H2S and NO-...HF, pro-ceeding by an E1 cb-like E2 mechanism. The $\beta-elimination$ of ethyl nitrite is an E2 type process. The $\alpha-elimi-nation$ reactions of methyl and ethyl nitrites with OH- have triple-well energy profiles of Elcb pathway with an $\alpha-carbanion$ intermediate which is stabilized bythe vicinal $nc\alpha-{\sigma}*o-N$ charge transfer interactions. CompIex-ation ofmethyl carbanion with HF seems to provide a stable intermediate within a triple-well energy profile of El cb channel in the reaction of F- with methyl nitrite.