• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.40-43
• /
• 2006

Public demand for the heat pump system as a next generation energy equipment is increasing for its eco-friendly and cost-effective advantage. Many researches have been concentrated on how to calculate and develop its own efficiency, while the possible effect of the heat pump operation on the whole subsurface temperature distribution is relatively less considered, During the current study, subsurface temperature disturbance caused by seasonal surface temperature cycle in Busan area and general W-tube heat pump operation is simulated in 3-dimensional heterogeneous medium. It shows that subsurface deeper than 10m from the surface remains nearly unchanged throughout the 4 seasons and groundwater convect ion in highly permeable layer near the surface acts like a main path of heat plume from heat pump system, This implies the significance of detail descript ion in shallow sedimentary layer or highly permeable layer which plays an important role on the regional flow advection and heat transfer. Also, the effect of groundwater convection increases when the arrangement of the 2 injection pipes and 2 extract ion well is maintained parallel to groundwater flow. Therefore, more careful and detail investigation is required before installation and operation of heat pump system that it may not cause any possible change of microbial ecosystem in the shallow subsurface environment or 'contamination of temperature' for groundwater use as well as the loss of efficiency of the equipment itself. This can also help to design the optimized grouting system for heat pump.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.40 no.1
• /
• pp.5-19
• /
• 2015

Literatures on open innovation have two major limitations. First, either on a firm level or on an industry level did they analyze the open innovation issues. The results of a firm's innovation can be diffused through the whole network and the firm can learn back from the network knowledge. Prior literatures did not consider the feedback loop among firms and network in which the firms are involved. Second, most open innovation research had a static perspective on firm's innovation performance. Since the diffusion, spill-over and learning among network members are involved over time, the open innovation is intrinsically dynamic. From the dynamic perspective, we can appreciate the fundamental attributes of the open innovation network which involves diverse firms, research institutes, and universities. In order to overcome the limitations, we suggest a dynamic model for open innovation network. We build an agent-based model which consists of heterogeneous firms. The firms are connected through a scale-free network which is formed by preferential attachment. Through the diverse scenario of simulation, we collect massive data on the firm level and analyze them both on firm and industry level. From the analysis, we found that, on industry level, the overall performance of open innovation increases as the internal research capability, absorptive capacity, and learning curve coefficient increase. Noticeably, as the deprecation rate of knowledge increases, the variability of knowledge increases. From the firm level analysis, we found that the industry-level variables had a significant effect on the firm's innovation performance lasting through all the time, whereas the firm-level variables had only on the early phase of innovation.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.12
• /
• pp.965-974
• /
• 2003

Today's network consists of a large number of routers and servers running a variety of applications. In this paper, we have designed and constructed the general simulation environment of network security model composed of multiple IDSs agent and a firewall agent which coordinate by CNP (Contract Net Protocol). The CNP, the methodology for efficient integration of computer systems on heterogeneous environment such as distributed systems, is essentially a collection of agents, which cooperate to resolve a problem. Command console in the CNP is a manager who controls the execution of agents or a contractee, who performs intrusion detection. In the knowledge-based network security model, each model of simulation environment is hierarchically designed by DEVS (Discrete Event system Specification) formalism. The purpose of this simulation is the application of rete pattern-matching algorithm speeding up the inference cycle phases of the intrusion detection expert system. we evaluate the characteristics and performance of CNP architecture with rete pattern-matching algorithm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.81-88
• /
• 2020

In this paper, the performances of the electrical characteristics of the Fused Deposition Modeling (FDM) 3D-printed flexible resistance sensor was evaluated. The FDM 3D printing flexible resistive sensor is composed of flexible-material thermoplastic polyurethane and a conductive PLA (carbon black conductive polylactic acid) polymer. While 3D printing, polymer filaments heat up quickly before being extruded and cooled down quickly. Polymers have poor thermal conductivity so the heating and cooling causes unevenness, which then results in internal stress on the printed parts due to the rapidity of the heating and cooling. Electrical resistance measurements show that the 3D-printed flexible sensor is unstable due to internal stress, so the 3D-printed flexible sensor resistance curve does not match the increases and decreases in the displacement curve. Therefore, annealing was performed to eliminate the mismatch between electrical resistance and displacement. Annealing eliminates residual stress on the sensor, so the electrical resistance of the sensor increases and decreases in proportion to displacement. Additionally, the resistance is lowered in comparison to before annealing. The results of this study will be very useful for the fabrication of various devices that employ 3D-printed flexible sensor that have multiple degrees of freedom and are not limited by size and shape.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.1
• /
• pp.140-152
• /
• 1989

The study on the penetration of sprays during the initial phase of injection period, i.e. ignition delay period, in high speed small D.I. diesel engines are strongly affected by such behavior. To investigate the penetration of the sprays injected through single cylinderical orifice, a mathematical model was developed and compared with experimental results. In this model, radial heterogeneity of fuel density in the spray, transiency of injection pressure difference, and spray outrunning phenomenon were considered simultaneously. Experiments on the behaviors of sprays in the high pressure air chamber were conducted at various injection pressure differences and different levels of back air pressure. The behaviors of sprays injected into the chamber through the conventional Bosch injection pump were visualized with side stroboscopic illumination. Comparison of the experimental results with predictions from the mathematical model confirmed the validity of the model. It was also found that during the initial phase of the injection period the penetration of sprays vs. time appeared to have two transition points; one corresponded to disintegration point of liquid fuel jet, the other to the beginning of steady state injection.

• Journal of KIISE
• /
• v.43 no.2
• /
• pp.256-268
• /
• 2016

Modern networks consisting of various heterogeneous equipment are often installed in a distributed manner. Thus the NETCONF standard was established to manage networks centrally and efficiently. In this paper, we present a method that integrates each NETCONF layer into a single system based on the results of previous studies. In the RPC Layer, an asynchronous communication channel and parallel processes are possible using multi-threading. In the Operation Layer, operational efficiency is increased by using a data group with dependencies between the equipment configuration data and by improving the data structure, enabling efficiently processing of XML queries even with multiple managers. The data modeling techniques and grouping methods in the Content Layer are presented in detail for interoperability between the Operation Layer and the Content Layer. Finally, the GUI program was implemented and its implementation is reported. We performed an experiment comparing the improved NETCONF with the standard NETCONF to measure factors, such as query processing ratio, query processing speed, and CPU utilization. The improved NETCONF demonstrated excellent query processing ratio and query processing speed, whereas the standard NETCONF had excellent CPU utilization.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.1
• /
• pp.29-33
• /
• 2020

Despite the same system architecture and operation principle, Advanced Metering Infrastructure (AMI) and Internet of Things (IoT) are recognized as a heterogeneous system. This is due to the different object modeling and communication protocols used in smart meters and sensors. However, data interworking between AMI and IoT is expected to be inevitable in the future. In this paper, we propose Device Language Message Specification (DLMS) to Lightweight Machine to Machine (LwM2M) conversion model. The proposed interworking model can reduce the packet size by 46.5% compared to that of the encapsulation method.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.450-459
• /
• 2015

Small cell networks, as an important evolution path for next-generation cellular networks, have drawn much attention. Different from the traditional base stations (BSs) always-on model, we proposed a BSs on-off model, where a new, simple expression for the probabilities of active BSs in a heterogeneous network is derived. This model is more suitable for application in practical networks. Based on this, we develop an analytical framework for the performance evaluation of small cell networks, adopting stochastic geometry theory. We derive the system coverage probability; average energy efficiency (AEE) and average uplink power consumption (AUPC) for different association strategies; maximum biased received power (MaBRP); and minimum association distance (MiAD). It is analytically shown that MaBRP is beneficial for coverage but will have some loss in energy saving. On the contrary, MiAD is not advocated from the point of coverage but is more energy efficient. The simulation results show that the use of range expansion in MaBRP helps to save energy but that this is not so in MiAD. Furthermore, we can achieve an optimal AEE by establishing an appropriate density of small cells.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.9
• /
• pp.2479-2492
• /
• 1999

Network management system(NMS) provides not only effective monitoring and controlling of network which consists of heterogeneous network elements but prompt response to users' need for high-level communication services. Recommendations of ITU-T and ISO stipulate the managerial abstraction of static and dynamic characteristics of network elements, management functions as well as management communication protocol. But the current description method does not provide the formal mechanism for the behavior characteristics of managed objects in clear manner but in natural language form, the complete specification of managed objects is not fully described. In this paper, we describe determinants for the behaviour of managed objects applicable to every managed object, and present a language for specifying behavioral aspects of managed objects based on their temporal and active properties.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.89-100
• /
• 2017

The Agricultural Policy/Environmental eXtender (APEX) model was developed to extend EPIC's capabilities of simulating land management impacts for small-medium watershed and heterogeneous farms. APEX is a flexible and dynamic tool that is capable of simulating a wide array of management practices, cropping systems, and other land uses across a broad range of agricultural landscapes. APEX have its own agricultural environmental database including operation schedule, soil property, and weather data etc., by crops. However, agriculture environmental informations the APEX model has is all based on U.S. As this can cause malfunction or improper simulation while simulating highland field. In this study, database for APEX model to be utilized for South Korea established with 44,814 agriculture fields in Pyeongchang-gun, Korea from 2007 to 2016. And assessed domestic applicability by comparing T-P unit load criteria presented by National Institution of Environmental Research and result of APEX model. As a result of APEX model simulation, average T-P value for decade was 6.18. Average T-P of every year except 2011 was in range of 5.37~10.43 and this is being involved into criteria presented by National Institution of Environmental Research. It is analyzed that adjusting slope factor can make the model applicable for domestic agricultural environment.