• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.91-105
• /
• 2016

Carbon Nanotube Field-Effect Transistors (CNTFETs) have been studied as candidates for post Si CMOS owing to the better electrostatic control and high mobility. To enhance the immunity against short - channel effects (SCEs), the novel channel and gate engineered architectures have been proposed to improve CNTFETs performance. This work presents a comprehensive study of the influence of channel and gate engineering on the CNTFET switching, high frequency and circuit level performance of carbon nanotube field-effect transistors (CNTFETs). At device level, the effects of channel and gate engineering on the switching and high frequency characteristics for CNTFET have been theoretically investigated by using a quantum kinetic model. This model is based on two-dimensional non-equilibrium Green's functions (NEGF) solved self - consistently with Poisson's equations. It is revealed that hetero - material - gate and lightly doped drain and source CNTFET (HMG - LDDS - CNTFET) structure can significantly reduce leakage current, enhance control ability of the gate on channel, improve the switching speed, and is more suitable for use in low power, high frequency circuits. At circuit level, using the HSPICE with look - up table(LUT) based Verilog - A models, the impact of the channel and gate engineering on basic digital circuits (inverter, static random access memory cell) have been investigated systematically. The performance parameters of circuits have been calculated and the optimum metal gate workfunction combinations of ${\Phi}_{M1}/{\Phi}_{M2}$ have been concluded in terms of power consumption, average delay, stability, energy consumption and power - delay product (PDP). In addition, we discuss and compare the CNTFET-based circuit designs of various logic gates, including ternary and binary logic. Simulation results indicate that LDDS - HMG - CNTFET circuits with ternary logic gate design have significantly better performance in comparison with other structures.

• 마이크로전자및패키징학회지
• /
• 제17권2호
• /
• pp.63-67
• /
• 2010

본 연구에서는 P3HT와 PCBM 물질을 전자도너와 억셉터 광활성층 물질로 사용하여 벌크이종접합 구조를 갖는 Glass/ITO/PEDOT:PSS/P3HT-PCBM/Al 구조의 유기박막태양전지를 제작하였다. P3HT와 PCBM은 각각 0.5 wt%의 농도로 톨루엔 용액에 용해하였다. 광활성층 농도를 최적화하기 위하여 P3HT:PCBM= 3:4, 4:4, 4:3 wt%의 농도비로 소자를 제작하고, 농도비에 따른 전기적 특성을 조사하였다. 또한 활성층의 후속열처리 온도가 소자의 전기적 특성에 미치는 영향을 조사하였다. P3HT와 PCBM의 농도비가 4:4 wt%의 비율에서 가장 우수한 전기적 특성을 나타내었으며, 이때 단락전류밀도 ($J_{SC}$), 개방전압 ($V_{OC}$), 및 충실인자 (FF)는 4.7 $mA/cm^2$, 0.48 V 및 43.1%를 각각 나타내었다. 또한 전력변환효율(PCE)은 0.97%의 값을 얻었다. 최적화된 농도비를 갖는 태양전지 소자에 대해 $150^{\circ}C$에서 5분, 10분, 15분, 20분간 후속 열처리를 실시한 결과 P3HT 전자도너의 흡광계수가 증가하는 경향을 보였다. 후속 열처리 조건이 $150^{\circ}C$에서 15분인 경우 전기적 특성이 열처리 하지 않은 소자에 비해 특성이 개선되었다. 즉, 이때의 전기적 특성은 $J_{SC},\;V_{OC}$, FF, PCE의 값이 각각 7.8 $mA/cm^2$, 0.55 V, 47%, 2.0%를 나타내었다.

• Applied Biological Chemistry
• /
• 제39권4호
• /
• pp.297-303
• /
• 1996

Aryl backbone의 ortho-위치에 (1,1-ethylenedioxy-2-fluoro)ethyl group이 치환된 일련의 제초성 (4,6-이치환-pyrimidin-2-yl)aminocarbonyl-2-(1,1-ethylenedioxy-2-fluoro)ethylbenzenesulfonamides, 1과 N-(4,6-이치환-triazin-2-yl)aminocarbonyl-2-(1,1-ethylenedioxy-2-fluoro)ethylbenzenesulfonamides, 2 유도체들을 합성하고 벼(Oryza sativa L.)를 위시하여 논 잡초인 피(Echinochloa crus-galli)와 올챙이 고랭이(Scirpus juncoides) 및 물달개비(Monochoria vaginalis pre니.)를 대상으로 측정된 제초활성$(pI_{50})$과 헤테로 고리 및 헤테로 고리상 4,6-이치환기의 변화에 따른 구조활성 관계(SAR)를 검토하였다. 그 결과 특히, 피에 대한 제초활성 조건으로 헤테로 고리는 소수성(log P<0)이, 그리고 4,6-이치환기는 분자굴절$((M_R)_{opt.}=14.58cm^3/mol)$상수가 가장 큰 영향을 미치는 요인이었다. 이들 두 상수(log P 및 MR)의 적정값(optimum value)을 만족하는 4,6-이치환기(X 및 Y)로는 dimethoxy group(1a 및 2c)이었으며 pyrimidine-치환체(1a)는 triazine-치환체(2c)보다 피에 대하여 선택적으로 양호한 제초활성$({\Delta}obs.pI_{50}=1.12)$을 나타내었다. 그리고 벼와 피에 대한 sulfonyl urea계 화합물의 선택성은 ortho-치환된 aryl backbone보다 4,6-이치환된 헤테로 고리의 구조에 의존적이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.427-427
• /
• 2016

Organic-inorganic hybrid perovskite have attracted significant attention as a new revolutionary light absorber for photovoltaic device due to its remarkable characteristics such as long charge diffusion lengths (100-1000nm), low recombination rate, and high extinction coefficient. Recently, power conversion efficiency of perovskite solar cell is above 20% that is approached to crystalline silicon solar cells. Planar heterojunction perovskite solar cells have simple device structure and can be fabricated low temperature process due to absence of mesoporous scaffold that should be annealed over 500 oC. However, in the planar structure, controlling perovskite film qualities such as crystallinity and coverage is important for high performances. Those controlling methods in one-step deposition have been reported such as adding additive, solvent-engineering, using anti-solvent, for pin-hole free perovskite layer to reduce shunting paths connecting between electron transport layer and hole transport layer. Here, we studied the effect of alkali metal halide to control the fabrication process of perovskite film. During the morphology determination step, alkali metal halides can affect film morphologies by intercalating with PbI2 layer and reducing $CH3NH3PbI3{\cdot}DMF$ intermediate phase resulting in needle shape morphology. As types of alkali metal ions, the diverse grain sizes of film were observed due to different crystallization rate depending on the size of alkali metal ions. The pin-hole free perovskite film was obtained with this method, and the resulting perovskite solar cells showed higher performance as > 10% of power conversion efficiency in large size perovskite solar cell as $5{\times}5cm$. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectrometry (ICP-OES) are analyzed to prove the mechanism of perovskite film formation with alkali metal halides.

• BMB Reports
• /
• 제34권4호
• /
• pp.355-364
• /
• 2001

Major human Nucleoside diphosphate kinases (NDPKs) exist as hetero-oligomers, consisting of NDPK-A and NDPK-B, rather than homo-oligomer. To investigate their biological function depending on the oligomeric structure in vivo, we characterized the biochemical properties of cellular NDPK. Cellular NDPKs, which are made up of a unique combination of isoforms, were purified from human erythrocyte and placenta. We found that cellular NDPK and recombinant isoforms NDPKs have their own distinct biochemical properties in autophosphorylation, stability toward heat or urea, and DNA binding. Cellular NDPK was found to have unique characteristics rather than the expected additive properties of recombinant isoforms. The mutations in the dimeric interface of NDPK-B (R34G, N69H or K135L) caused defective DNA binding and simultaneously reduced the enzymatic stability These results suggest that the oligomeric interaction could play a major role in the stability of catalytic domain and might be related to the regulation of various cellular functions of NDPK.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.124-129
• /
• 2015

Organic electronics are the domain in which the components and circuits are made of organic materials. This new electronics help to realize electronic and optoelectronic devices on flexible substrates. In recent years, organic materials have replaced conventional semiconductors in many electronic components such as, organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic (OPVs). It is well known that organic light emitting diodes (OLEDs) have many advantages in comparison with inorganic light-emitting diodes LEDs. These advantages include the low price of manufacturing, large area of electroluminescent display, uniform emission and lower the requirement for power. The aim of this paper is to model polymer LEDs and OLEDs made with small molecules for studying the electrical and optical characteristics. The purpose of this modeling process is, to obtain information about the running of OLEDs, as well as, the injection and charge transport mechanisms. The first simulation structure used in this paper is a mono layer device; typically consisting of the poly (2-methoxy-5(2'-ethyl) hexoxy-phenylenevinylene) (MEH-PPV) polymer sandwiched between an anode with a high work function, usually an indium tin oxide (ITO) substrate, and a cathode with a relatively low work function, such as Al. Electrons will then be injected from the cathode and recombine with electron holes injected from the anode, emitting light. In the second structure, we replaced MEH-PPV by tris (8-hydroxyquinolinato) aluminum (Alq₃). This simulation uses, the Poole-Frenkel -like mobility model and the Langevin bimolecular recombination model as the transport and recombination mechanism. These models are enabled in ATLAS- SILVACO. To optimize OLED performance, we propose to change some parameters in this device, such as doping concentration, thickness and electrode materials.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.9-14
• /
• 2019

Carrier selective solar cell structure has allured curiosity of photovoltaic researchers due to the use of wide band gap transition metal oxide (TMO). Distinctive p/n-type character, broad range of work functions (2 to 7 eV) and risk free fabrication of TMO has evolved new concept of heterojunction intrinsic thin layer (HIT) solar cell employing carrier selective layers such as $MoO_x$, $WO_x$, $V_2O_5$ and $TiO_2$ replacing the doped a-Si layers on either front side or back side. The p/n-doped hydrogenated amorphous silicon (a-Si:H) layers are deposited by Plasma-Enhanced Chemical Vapor Deposition (PECVD), which includes the flammable and toxic boron/phosphorous gas precursors. Due to this, carrier selective TMO is gaining popularity as analternative risk-free material in place of conventional a-Si:H. In this work hole selective materials such as $MoO_x$, $WO_x$ and $V_2O_5$has been investigated. Recently $MoO_x$, $WO_x$ & $V_2O_5$ hetero-structures showed conversion efficiency of 22.5%, 12.6% & 15.7% respectively at temperature below $200^{\circ}C$. In this work a concise review on few important aspects of the hole selective material solar cell such as historical developments, device structure, fabrication, factors effecting cell performance and dependency on temperature has been reported.

• Animal Bioscience
• /
• 제35권12호
• /
• pp.1860-1870
• /
• 2022

Objective: The observation that temperate C₃ and tropical C₄ forage silages easily produce large amounts of ethanol or acetic acid has puzzled researchers for many years. Hence, this study aimed to assess the effects of epiphytic microbiota from C₃ forages (Italian ryegrass and oat) on fermentative products and bacterial community structure in C₄ forage (sorghum) silage. Methods: Through microbiota transplantation and γ-ray irradiation sterilization, the irradiated sorghum was treated: i) sterile distilled water (STSG); ii) epiphytic microbiota from sorghum (SGSG); iii) epiphytic microbiota from Italian ryegrass (SGIR); iv) epiphytic microbiota from oat (SGOT). Results: After 60 days, all the treated groups had high lactic acid (>63.0 g/kg dry matter [DM]) contents and low pH values (<3.70), acetic acid (<14.0 g/kg DM) and ammonia nitrogen (<80.0 g/kg total nitrogen) contents. Notably, SGIR (59.8 g/kg DM) and SGOT (77.6 g/kg DM) had significantly (p<0.05) higher ethanol concentrations than SGSG (14.2 g/kg DM) on day 60. After 60 days, Lactobacillus were predominant genus in three treated groups. Higher proportions of Chishuiella (12.9%) and Chryseobacterium (7.33%) were first found in silages. The ethanol contents had a positive correlation (p<0.05) with the abundances of Chishuiella, Acinetobacter, Stenotrophomonas, Chryseobacterium, and Sphingobacterium. Conclusion: The epiphytic bacteria on raw materials played important roles in influencing the silage fermentation products between temperate C₃ and tropical C₄ forages. The quantity and activity of hetero-fermentative Lactobacillus, Chishuiella, Acinetobacter, Stenotrophomonas, Chryseobacterium, and Sphingobacterium may be the key factors for the higher ethanol contents and DM loss in silages.

• 센서학회지
• /
• 제22권4호
• /
• pp.244-248
• /
• 2013

The discovery of a two-dimensional electron gas (2DEG) in $LaAlO_3$ (LAO)/$SrTiO_3$ (STO) heterostructure has stimulated intense research activity. We suggest a new structure model based on $KNbO_3$ (KNO) material. The KNO thin films were grown on $TiO_2$-terminated STO substrates as a p-type structure ($NbO_2/KO/TiO_2$) to form a two-dimensional hole gas (2DHG). The STO thin films were grown on KNO/$TiO_2$-terminated STO substrates as an n-type structure to form a 2DEG. Oxygen pressure during the deposition of the KNO and STO thin films was changed so as to determine the effect of oxygen vacancies on 2DEGs. Our results showed conducting behavior in the n-type structure and insulating properties in the p-type structure. When both the KNO and STO thin films were deposited on a $TiO_2$-terminated STO substrate at a low oxygen pressure, the conductivity was found to be higher than that at higher oxygen pressures. Furthermore, the heterostructure formed at various oxygen pressures resulted in structures with different current values. An STO/KNO heterostructure was also grown on the STO substrate, without using the buffered oxide etchant (BOE) treatment, so as to confirm the effects of the polar catastrophe mechanism. An STO/KNO heterostructure grown on an STO substrate without BOE treatment did not exhibit conductivity. Therefore, we expect that the mechanics of 2DEGs in the STO/KNO heterostructures are governed by the oxygen vacancy mechanism and the polar catastrophe mechanism.

• 환경위생공학
• /
• 제19권3호
• /
• pp.40-51
• /
• 2004

Community structure of benthic macroinvertebrates in the water system of Anyang Stream was analyzed from August, 2002 to April, 2003. Species number of benthic macroinvertebrates was 78 species, 33 families, 11 orders, 5 classes in 3 phyla. They were collected 49 species at 1st survey, 51 species at End survey and 53 species at 3rd survey, respectively. Species numbers at each tributary were 43 species at the Wanggok Stream, 44 species at the Mokgam Stream, 33 species at the Ohjeon Stream and 26 species at the Hakeu Stream, while it was only 9 species at the Dangjeong Stream. Species number of the main course of Anyang Stream was 24 species. Dominant species of benthic macroinvertebrates at the Wanggok, Ohjeon and Hakeu Stream were Baetis fuscatus, Alainites muticus, Physa acuta and chironominae sp. They were mainly intermediate and tolerant species. Dominant species and subdominant species of the Dangjeong Stream were Limnodrilus socialis, Psychoda KUa and Telmatoscopus KUa as indicator species for severe sewage pollution. Dominant species at Geumjeong-dong and KUa bridge in the main course of Anyang Stream were Physa acuta, Limodrilus gotoi, Chironominae sp., Species diversity indices at the Mokgam Stream were $high(3.53\~4.28\;range)$ and those of the Hakeu, Wanggok and Ohjeon Stream were some what high$(2.00\~3.13\;and\;2.34\~3.10\;range)$. But, species diversity indices in the Dangjeon Stream were low$(1.36\~1.70\;range)$ too. and those of the main course of Anyang Stream were low$(0.86\~1.79\;range)$ too. Species richness indices in the Wanggok and Mokgam Stream were very high$(3.55\~4.02\;and\;2.96\~5.31\;range)$ and those of Geumjeong-dong and Kia bridge in the main course of Anyang Stream were low$(0.89\~1.98\;range)$. Stream bed and riparian bank of middle reach in the Wanggok Stream were good condition and water was clean. The Mokgam Stream had various microhabitats, good water weed area, hetero geneous substrates and etc.. And, stream bed in the Hakeu Stream was in good condition. So, above streams should be continuously in good ecological condition and useful area for citizens.