• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.935-940
• /
• 2001

To determine the effect of different growth stages and cultivars on the chemical composition of sorghum plant and its morphological fractions, samples of whole plant, leaf and stem of J.S-263, J.S-88 and Hegari cultivars, harvested at various growth stages were drawn for analysis. All the samples were analysed for their dry matter contents and various cell wall components such as NDF, ADF. hemicellulose, cellulose, lignin, cutin and silica. Significant increase in DM contents of whole sorghum plant, leaf and stem was observed with advancing stage of growth. The highest DM content was recorded in leaf fraction of the plant. All the cell wall constituents increased significantly in whole sorghum plant, leaf and stem as the plant matured. The maximum NDF, ADF, cellulose and lignin contents were observed in stem fraction, followed by whole plant. However, the hemicellulose, cutin and silica contents were higher in leaf fraction of the plant. The cultivars were found to have some effect on the chemical composition of whole plant, leaf and stem fractions. The results indicated that plant maturity had a much greater effect on the chemical composition of sorghum plant, whereas it was little affected by cultivars.

• Journal of Environmental Science International
• /
• v.8 no.4
• /
• pp.509-514
• /
• 1999

The sewage sludges and livestock manures, respectively, were composted with sawdust used for control moisture in the static piles system composter. The variations of temperature, pH, moisture, C/N ratio, inorganic content, forms of organic materials and nitrogen, and contents of heavy metals were investigated. The results were summarized as follows ; The temperature for composting the sewage sludges reached the highest temperature of 52$^{\circ}C$, after 3 days and lasted for 7 days, and then went down 3$0^{\circ}C$ after 52 days. In the case of composting livestock manures, the temperature reached to 63$^{\circ}C$ after 10 days, that lasted for 10 days, and then went down gradually. After upsetting the sewage sludges and livestock manures for composting were decreased to 30% and 36%, respectively. The contents of inorganic matters and heavy metals were changed by the characteristics of raw materials but increased gradually during composting process. The total contents of organic materials in the sewage sludges and livestock manures for composting were decreased to 7% and 9%, respectively. The contents of ether extracts, resins, hemicellulose and cellulose were decreased but those of water soluble polysaccharides and lignins were not changed. The total contents of nitrogen in sewage sludges and livestock manures were decreased to 43% and 34%, respectively.

• Journal of Biosystems Engineering
• /
• v.34 no.1
• /
• pp.44-49
• /
• 2009

This study was conducted to investigate the pyrolysis characteristics of switchgrass using TGA-FTIR instrument. Switchgrass is a high yielding perennial grass that has been designated as a potential energy crop, because of its high energy value. Ground switchgrass were pyrolysed at different heating rates of 10, 20, 30, and $40^{\circ}C/min$ in a TGA-FTIR instrument. The thermal decomposition characteristics of switchgrass were analyzed, and the gases volatilized during the experiment were identified. The thermal decomposition of switchgrass started at approximately $220^{\circ}C$, followed by a major loss of weight, where the main volatilization occurred, and the thermal decomposition was essentially completed by $430^{\circ}C$. The pyrolysis process was found to compose of four stages; moisture evaporation, hemicellulose decomposition, cellulose decomposition, and lignin degradation. The peak temperatures for hemicellulose decomposition ($306^{\circ}C$ to $327^{\circ}C$) and cellulose decomposition ($351^{\circ}C$ to $369^{\circ}C$) were increased with greater heating rates. FTIR analysis showed that the following gases were released during the pyrolysis of switchgrass; $CO_2$, CO, $CH_4$, $NH_3$, COS, $C_{2}H_{4}$, and some acetic acid. The most gas species were released at low temperature from 310 to $380^{\circ}C$, which was corresponding well with the observation of thermal decomposition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.366-370
• /
• 1999

Samples of whole plant, leaf and stem of Akbar, Neelum, UM-81 and lZ-31 cultivars of maize fodder harvested up to 14 weeks at different growth stages were drawn and analysed for dry matter contents and various cell wall constituents such as NDF, ADF, hemicellulose, cellulose, lignin, cutin and silica. The dry matter contents of whole maize plant, leaf and stem increased significantly (p<0.01) with advancing plant age. Maximum dry matter was found in the leaf fraction of the plant. The cell wall components continued to increase significantly (p<0.001) in whole maize plant and its morphological fractions as the age advanced. Maximum values for NDF, ADF, cellulose and lignin were observed in stem followed by whole plant and leaf, whereas hemicellulose, cutin and silica contents were higher in leaf fraction of the plant. The cultivars were observed to have some effects on chemical composition of all plant fraction. The results indicated that maturity had a much greater effect on the concentration of all the structural components than did the cultivars. It was concluded that maize fodder should be cut preferably between 8th to 9th week of age (flowering stage) to obtain more nutritious and digestible feed for livestock. Among the maize cultivars, Neelum proved to be the best, due to its higher dry matter contents and lower lignin concentration.

• Korean journal of food and cookery science
• /
• v.6 no.2
• /
• pp.1-6
• /
• 1990

The purpose of this study was to investigate the effects of preheating and salt concentration on the fermentation rate and firmness of cucumber kimchi, and the relationship between firmness and the contents of pectin fractions, hemicellulose and cellulose during fermentation. For this purpose, pH, acidity, firmness and the contents of pectic fractions, hemicellulose and cellulose were studied. 1. The changes of pH and titratable acidity indicated that preheating and high salt concentration delayed the fermentation rate in cucumber kimchi. 2. After 9 days, preheated cucumber kimchi was firmer than nonpreheated cucumber kimchi. 3. During fermentation, the cucumber kimchi fermented at 5% NaCl was firmer than that femented at 2% NaCl. 4. After 9 days, preheated cucumber kimchi was higher in insoluble pectin (HCISP)content and lower in soluble pectin (HWSP & HXSP) content than nonpreheated cucumberkimchi and hese results in accord with those of firmness measurements. 5. During fermentation, the cucumber kimchi fermented at 5% NaCl was higher in insoluble pectin content and lower in soluble pectin content than nonpreheated cucumber kimchi, and these results were in accord with those of firmness measurement. 6. During fermentation, cellulose content decreased.

• Plant Biotechnology Reports
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2011

Secondary walls have recently drawn research interest as a primary source of sugars for liquid biofuel production. Secondary walls are composed of a complex mixture of the structural polymers cellulose, hemicellulose, and lignin. A matrix of hemicellulose and lignin surrounds the cellulose component of the plant's cell wall in order to protect the cell from enzymatic attacks. Such resistance, along with the variability seen in the proportions of the major components of the mixture, presents process design and operating challenges to the bioconversion of lignocellulosic biomass to fuel. Expanding bioenergy production to the commercial scale will require a significant improvement in the growth of feedstock as well as in its quality. Plant biotechnology offers an efficient means to create "targeted" changes in the chemical and physical properties of the resulting biomass through pathway-specific manipulation of metabolisms. The successful use of the genetic engineering approach largely depends on the development of two enabling tools: (1) the discovery of regulatory genes involved in key pathways that determine the quantity and quality of the biomass, and (2) utility promoters that can drive the expression of the introduced genes in a highly controlled manner spatially and/or temporally. In this review, we summarize the current understanding of the transcriptional regulatory network that controls secondary wall biosynthesis and discuss experimental approaches to developing-xylem-specific utility promoters.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.186-188
• /
• 1999

This study was conducted to investigate the effects of four levels (0, 10, 20, 40 %) of sugar-beet pulp (SB pulp) supplementation to Italian ryegrass hay (IRG hay) on the fiber degradability of IRG hay in the rumen of goats. The following results were obtained: Degradabilities of DM, NDF, ADF and hemicellulose of IRG hay in the rumen increased significantly (p<0.05) by 10 % level supplementation of SB pulp to IRG hay. This was probably due to the increased numbers (p<0.05) of total viable bacteria, pectin-fermenting, xylan-fermenting and cellulolytic bacteria in the rumen in the increased supply of degradable pectic substances and hemicellulose at 10% level supplementation of SB pulp pectin. In 40% supplementation of SB pulp, ruminal pH was lowered by the fermentation of increased amount of molasses from SB pulp, resulting in the depression of growth of fiber fermenting bacteria and hence the decrease in degradabilities of cell wall fractions. It was suggested from this study that the sugar-beet pulp supplementation to forages at the level of 10% in the total diet increased fiber degradation of forage in the rumen of goats.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.4
• /
• pp.403-409
• /
• 1989

Dietary fiber(DF) content and their properties were analyzed in some common vegetables such as Squash(leaf), Water cress, Garland chrysanthemum, Leek and sweet potato(stem). DF was analyzed by the method of detergent fractionation. Values for neutral detergent fiber(NDF), acid detergent fiber(ADF), lignin, hemicellulose were obtained. NDF for most samples was $13.83%{\sim}24.31%$, ADF was $11.99%{\sim}21.03%$, lignin was around $0.56%{\sim}3.00%$, hemicellulose was about $1.33%{\sim}3.88%$, cellulose was $9.08%{\sim}14.87%$ except sweet potato(leaf) (20.47%). This paper describes two properties of the fiber-of commonly eaten vegetables ; water-holding capacity(WHC) and metal binding. The capacity of the acetone dried powder (ADP) to hold water was estimated. The WHC measurements differed from 7.49 per 9 of ADP for Water cress to 11.09 per 9 of ADP for Leek. The binding of Fe, Zn in NDF. ADF obtained from five fiber sources was examined under two pH conditions ; 1) pH2.1, 2) pH6.1. Fe, Zn binding increased with higher pH and differed from DF sources.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.1
• /
• pp.26-32
• /
• 2015

Four types of straw, namely, soybean, wheat, corn, and rice, were investigated for use in lactic acid production. These straws were mainly composed of cellulose, hemicellulose, and lignin. After pretreatment with ammonia, the cellulose content increased, whereas the hemicellulose and lignin contents decreased. Analytical results also showed that the liquid enzymatic hydrolysates were primarily composed of glucose, xylose, and cellobiose. Preliminary experiments showed that a higher lactic acid concentration could be obtained from the wheat and soybean straw. However, soybean straw was chosen as the substrate for lactic acid production owing to its high protein content. The maximum lactic acid yield (0.8 g/g) and lactic acid productivity (0.61 g/(l/h)) were obtained with an initial reducing sugar concentration of 35 g/l at 30℃ when using Lactobacillus casei (10% inoculum) for a 42 h fermentation period. Thus, the experimental results demonstrated the feasibility of using a soybean straw enzymatic hydrolysate as a substrate for lactic acid production.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.26-31
• /
• 1995

Acetylcellulose(AC) was prepared with steam exploded wood(EXW) and EXW after delignification with sodium chlorite, pine (Pinus densiflora) and oak (Quercus mongolica) woods. The color of acetylated pine and oak exploded wood was brown, degree of substitution(D.S) of pine was 1.47~2.09, and this of oak was 1.49~2.29. The hemicellulose content of acetylated pine and oak exploded wood was 0~3.4% and 1.49~11.3%, individually. The degree of substitution of acetylated wood prepared from delignified EXW in the pine and oak wood was 0.50~0.71 and 0.70~0.88, individually. Hemicellulose content of acetylated EXW with sodium chlorite after delignification in the pine and oak wood was less than 1% and 0.6~2.5%. The color of acetylated wood after delignification was white. IR-spectra of acetylated pine and oak EXW after delignification were found that peaks at around 1740$cm^{-1}$ and 1200$cm^{-1}$ increase markedly, due to ester carbonyl group.