• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.3
• /
• pp.234-245
• /
• 1997

This study aims to clarify the preference of the hedge, on focusing the height, density, width of the hedge, which gives limited dwelling space continuity with outer space, promotes the naturality to dwelling environment, and plays an important role as green space in city. For this, it is performed statistical analysis by field survey, by classifying the hedge as planting pattern, and synthesizing the photograph. Therefore, the results of this study are as follows : 1. In the preference of height of the hedge, when only the hedge is composed, 1.5M is preferred, and when the hedge with deciduous tree, with needle-leaf tree, 1.25M is preferred. 2. In the preference of density of the hedge, which are perfect density, in case of the hedge, which are almost density, in case of the needle-leaf tree, are preferred. 3. In the preference of width of the hedge, 0.4M is preferred. 4. In the preferential factors of the hedges, the preference of the hedge is mainly influenced by density. As the result of multiple regression analysis of visual preference as the height, the density, the width, and the regression equation are as follows : Visual Preference = 0.094+0.412(density)+0.370(height)+0.177(width)

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.3
• /
• pp.155-163
• /
• 2016

Objective: This study aims to draw the characteristics of occupational accidents occurred in cabling work, and assess accident severity based on occupational injury data. Background: Accident factors and accident risk are different by the place of work in cabling work. Field managers require information on accident prevention that can be easily understood by workers. However, there has been a lack of studies that focus on cabling work in Korea. Method: This study classifies 450 injured persons caused in cabling work by process, and analyzes the characteristics of occupational injuries from the aspects of age, work experience and accident type. This study also analyzes accident frequency and severity of injury. Results: Results show that preparing/finishing (33.3%) was the most common type of cabling process in injuries, followed by maintenance (28.4%), routing/income (23.1%) and wiring/installation (15.1%) process. The critical incidents in the level of risk management were falls from height in the routing/incoming process, and falls from height in the maintenance process. And, incidents ranked as 'High' level of risk management were slips and trips, fall from height and vehicle incident in the preparing/finishing process, and fall from height in the wiring/installation process. Conclusion and Application: The relative frequency of accident and its severity by working process serve as important information for accident prevention, and are critical for determining priorities in preventive measures.

• Korean Journal of Plant Resources
• /
• v.11 no.3
• /
• pp.264-271
• /
• 1998

This study was conducted to investigate morphological characteristics of Korean local garlic varieties and to define the genetic variability and the correlations amongthe characters associated with yield. The plant height, the leaf sheath diameter, the nubmer of leaves, and bulb weight were significantly increased in the garlic plants from heavier seed bulbs. The proportation of six clove bulbs was more than 60% in Seosan variety and this was not realted with the number of cloves in seed bulb. While more than 70% bulbs in Jeoksung and Danyang varieties cultivated in paddy field were composed of 6 or 7 cloves, majority of the bulbs of Euisung and Danyang varieties cultivated in upland were composed of bulbs with 7 cloves or more. The highest genotypic coefficient of variation (GCV) and phenotypic coefficient of variation (PCV) were observed in bulb weight. GCV and PCV also showed high value in leaf sheath diameter. Thus, there is a greater scope for selection of these characters. The small difference between PCV and GCV values in plant height indicates that the environmental influence would be limited in this character. High heritability was observed of plant height (56.76%) and bulb weight (45.95%). And the weight per bulb (34.24%) exhibited highest genitic advance followed by leaf sheath diameter (18.8%) and plant height (9.61%), and those would be the ideal characters for selelction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.113-119
• /
• 1989

In 1988 the tolerance of corn, sorghum, sorghum-sudangrass. and pearl millet hybrids to simazine and alachlor was tested in field during the growing season and pots during the summer and fall. In field and summer pot experiments(Exp.) the above mentioned four crops were tested at the ratios of simazine WP (50% ai, g/10a) ; alachlor EC (43.7% ai. ml/10a) of 130: 0, 100: 0, 70: 200, 0: 300 and 0: 400 and a sorghum hybrid was tested at 0, 50, 100, 200, 300, and 400ml/10a of alachlor and 70g/10a of simazine+ 200ml/10a of alachlor in fall pot Exp. In corn emergence rate, percent stand, plant height of seedlings, and dry matter(DM) yield were not affected by simazine and alachlor in all Exps. In sorghum and sorghum-sudangrass early growth and DM yield were not affected by simazine and alachlor in field Exp. In contrast, simazine reduced height and dry weight of seedlings slightly without any deterimental effects on emergence and survival rates. but alachlor reduced survival rate, plant height, and dry weight of seedlings significantly in summer pot Exp. In fall Exp. alachlor did not affect emergence rate of a sorghum hybrid, but survival rate, plant height, and dry weight of seedlings reduced with increased levels of alachlor when applied higher than 100ml/10a. In pearl millet simazine did not affect emergence rate, plant height, and DM yield in field, but reduced survival rate, plant height, and dry weight of seedlings in summer pot Exp. However, alachlor reduced DM yield significantly due to a lower percent stand even in the field. In summer pot Exp. although emeregence rate was slightly reduced, all seedlings were dead after emergence. Simazine did not control grasses such as Digitaria sanguinalis, Setaria viridis, Echinochloa crusgalli effectively, but controlled broadleaf weeds. Alachlor controlled all grasses, Porluraca oleracea, and Amaranthus mangostanus, but did not control Acalypha australis and Chenopodium album. A combination of simazine and alachlor controlled weeds more effectively than either simazine or alachlor alone.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.3
• /
• pp.71-75
• /
• 1972

The growth of the mussel, Mytilus edulis, in a salt-field reservoir was investigated at Dangjin, Choongnam, from June to October in 1970. l. Temperature, salinity, specific gravity, and pH of water were $22.5-27.5^{\circ}C,\;28.6-34.8\%$, 1.019-1.024, and 7.6 respectively in the salt-field reservoir from June 20 to July 19. 2. Three species of Gastropoda and seven species of Pelecypoda were collected. 3. The shell height of the mussel group in the highest abundance increased from 200mm($15\~25mm$) on June 15 to 40mm ($20\~50mm$) on September 26 in the salt-field reservoir, whereas the average shell heights of them were 19.80mm (June 15) and 35. 10mm (Sept. 26) respectively. 4. The daily growth of the mussel from July 10 to August 12 was 0.22 mm in shell height and highest during the experimental period. 5. The relationships between shell length (L) and shell height (H), and between shell length (L) and shell breadth (B) of the young mussel are represented by the following equations respectively : H=1.26776L+5.07978 B=35041L+3.05502 6. From the above results, it is suggested that the culture of the mussell, Mytilus edulis, in a salt-field reservoir is possible.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.479-484
• /
• 2007

For calculation of wave field for design of coastal and port structures, generally the wind fields from inland observation record or the predicted waves from deep water wave transformation model are being used. However, for the first case, as we should revise the wave data adopting correcting parameters depending on the distance from the coast and location, it is difficult to extract water waves from wind field. Furthermore, for the second case, because of the calculation which executed under very large grid sizes in the wide domain, the simulation(wave transformation) implied uncertainty in the near shore area and shallow region. So it's difficult to obtain exact data from the simulation. Thus, in this study the calculation of wave field on shallow water is accomplished using the observed data of typhoon 'Maemi' in the Korea Eastern South sea. Moreover, for the accuracy of the calculated wave field, we compared and studied the observed data of wave height and direction on the vicinity of the Ulsan waters. It is proved that the results of this study is more accurate than the existing method with showing ${\pm}1.3%$ difference between observed and calculated wave height distribution in Ulsan waters

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.5
• /
• pp.436-442
• /
• 2009

This paper describes a study on the design of compact polymer bushing with inner control shield. In the bushing, a high electric stress occurred between field shaper and central conductor by the closely space. Also coaxial cylindrical shield has a great height along the axis to control an electric field. Consequently, all the potentials are raised axially along the field shaper and electric stress is concentrated on a part of the surface of the FRP tube near the upper end of the field shaper. In accordance, the field control can be achieved by means of the designs of such inner control shields. The floating and ring shield designs was decreased electric field concentration at critical parts of the bushing. The shield gaps is formed between field shaper and ring shield. Accordance equipotential lines extend through gaps. As a result, the resulting electrical stress are thus reduced in the range $17{\sim}23%$ in the bushing with floating and ring shield designs. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing. The optimized design uses internal elements for electric stress grading at critical parts of the bushing.

• Journal of Environmental Science International
• /
• v.14 no.3
• /
• pp.297-309
• /
• 2005

Recently air quality modeling studies for industrial complex and large cities located in the coastal regions have been carried out Especially, the representation of atmospheric flow fields within a model domain is very important, because an adequate air quality simulation requires an accurate portrayal of the realistic three­dimensional wind fields. Therefore this study investigated effect of using high resolution terrain height data and FDDA with observational data to reflect local characteristics in numerical simulation. So the experiments were designed according to FDDA and the detail terrain height with 3sec resolution or not Case 30s was the experiment using the terrain height data of USGS without FDDA and Case 3s was the experiment using the detail terrain height data of Ministry of Environment without FDDA and Case 3sF was experiment using the detail terrain height data of Ministry of Environment with FDDA. The results of experiments were more remarkable, In Case 3s and Case 3sF, temperature indicated similar tendency comparing to observational data predicting maximum temperature during the daytime and wind speed made weakly for difference of terrain height Also Case 3sF had more adequate tendency than Case 3s at dawn.

• Journal of Korean Society of Forest Science
• /
• v.98 no.2
• /
• pp.156-162
• /
• 2009

Nebkhas are widely distributed in farming-pastoral zones, typical grassland and desert margins. In the southeast of the Inner Mongolia Plateau, it is mainly distributed at the leeward of cultivated land and alluvial fan, severe deterioration rangeland and around residential points. Through the field measurement and statistical analysis of Caragana microphylla Lam. Nebkhas morphological parameters (length, width and height of Nebkhas are included), the results show that there were close correlations between the Nebkhas morphological parameters. The ranges of height and width of Nebkhas changed dramatically and have reached up to 11.44 m and 7.97 m respectively, however, the change range of height was relatively smaller and just 1.09 m. The morphological parameters change of the same type Nebkhas in the same region was large ranging from 0.56 m in height, 3.56 m in width to 6.96 m in length, while the morphological characteristics of the same type Nebkhas in different regions were much similar. A correlation between length and width was significantly positive, but the correlations between height and length, and between height and width were much more complicated. It can be concluded that the Nebkhas in Zhengxiangbai Banner and Taipusi Banner were at the initially growing stage, while the Nebkhas in Huade County belonged to a transitional stage from the growing phase to the stabilizing phase. The changing regularity of distance between Nebkhas in along-wind direction was not consistent.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.1
• /
• pp.1-11
• /
• 2013

The aim of this study was estimated the characteristics of the wave propagation by the water level conditions using a numerical modeling method at the Wando sea area. For three cases numerical simulation on the condition of incident and incoming of the deepwater design wave and the season normal wave, the spatial distribution of the incident wave at study area were investigated. And the calculated numerical modeling results were compared with measured field wave data. According to on-site wave data measured for 18 days, the range of the significant wave height and period were 0.10~1.14 m, 4.35~8.74 sec, respectively, and the maximum wave height were 0.15~1.66 m. From the results of numerical model for offshore design wave incident, the wave height attacked from Southern-East direction at this study area were over maximum 10.5 m because of rapidly change of water depth. Numerical modeling by three water level conditions of Approxmate Lowest Low Water Level(Approx. L.L.W), Mean Sea Level(M.S.L) and Approximate Highest High Water Level(Approx. H.H.W) were practiced. From the results for the case of Approx. H.W.L, variations of wave height at the back area of islands were about 1.6 m at maximum value for the case of deepwater design wave incoming. The significant wave heights of winter season were bigger than summer under normal wave condition, the incident wave height over 5.5 m decreased by shielding effect of islands. The change of maximum wave height at summer season were distinct than winter and was about 1.2 m and 0.8 m, respectively.