• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.843-849
• /
• 1996

Locations and emission characteristics of noise source of motor vehicles are great important factors to control the road traffic noise in effective ways. From results of this study on emission characteristics of engine and exhaust noise, we could find that every noise emission of different kind of vehicles has smilar pattern. The main emission locations of engine noise for the front of vehicle became the space between the road surface and bottom of the body and radiator grill, and for the side of vehicle became the space between the road surface and bottom nearby the front wheel. In case of exhaust noise of passenger-car and light truck, all the highest sound intensity level located near surface of road. But it is hard to conclude the height of noise source of driving vehicles with only results of this study. So further studies are needed to check the emission characteristics of noise.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.603-608
• /
• 1998

In order to obtain basic data for the prediction of railway noise propagation, the noise radiation characteristics (source position, radiation directivity, etc) of trains were measured by using the sound intensity method. The measurements were performed at a side of railway by setting an intensity-probe array. As the measurement results, it was found that rolling noise due to interaction between wheel and rail and motor noise radiation from the lower part of train are dominant. The location of main sound sources can be described as being at the height of 0.1m in the center line of track, and the radiation directivity in the cross section of actually running trains are presented as a dipole source.

• Transactions of Materials Processing
• /
• v.19 no.5
• /
• pp.305-310
• /
• 2010

Recently industry of motor vehicle is making a gradual progress of automotive electric components. According to this step, wire harness equipped at motor vehicle is also increased. The most important component at the wire harness is electric connector. At the manufacturing process of electric connector, exactly at the crimping process, design variables, such as clamping-height, clamping-width and clamping die shape are critical parameters to assure satisfactory harness shape in clamping process of electric connector. In this study we have performed FEM simulation for clamping process and clarified the effect of design variables on compression rate of wire.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.37-39
• /
• 2005

This paper is proposed maximum thrust design of slotted Permanent Magnet Linear Synchrous Motor (PMLSM) using surface harmonic method considering slot effect. The genetic algorithm is used for optimization. The objective functions are the maximum thrust and the minimum detent force. This time, design parameters are set as PM width, PM height and slot width.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.750-755
• /
• 2005

This paper proposes a small VCM (Voice coil motor) type actuator using curved suspensions for auto-focusing and zoom motions for mobile information devices. 1'he proposed focusing actuator adopts a nontraditional type of suspension using curved beams in order to extend output displacement within small height restriction. The curved beam is similar to the leaf spring type which is usually used in optical disk drives. In addition, three different materials are considered for the curved suspension model, and Aluminum shows the best dynamic characteristics. The proposed zoom actuator does not use a suspension supporting bobbin but a moving rail and a sloper mechanism by generating rotational force at lens holder. The sensitivity of design parameters on output performance is studied using ANSYS (3D FEM tool). Experiments using a prototype of the proposed actuator model verified the analytical prediction and performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.431-436
• /
• 2014

In this paper, temperature change properties on the 210kW-class Interior Permanent Magnet Synchronous Motor (IPMSM) are performed with the cooling performance of a water cooling device through the thermal characteristic analysis of the IPMSM considering a real driving pattern of urban railway vehicles. First, the thermal analysis modeling of 210kW-class IPMSM, which is an alternative to the conventional induction motor, and its water cooling device is conducted. Next, the thermal characteristic analysis of the IPMSM considering a real driving pattern of urban railway vehicles is performed using 2-Dimensional FEM tool. Finally, the calculated characteristic results are analyzed. Consequently, it is confirmed that the internal temperature of the 210kW-class IPMSM may be lowered to about 42~52% by maintaining the coolant flow rate of the water cooling device (Cross sectional shape of the pipe has 220mm width and 10mm height) for 0.2kg/s level.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.510-519
• /
• 1998

Recently, computer modelling is increasingly used as a design tool, which requires more detailed data for heat transfer coefficients in various regions of the induction motor. But there are little information about those of rotor fan and endring because of difficulty in measuring signals in rotating bodies. In the present studies, the temperature signals were precisely measured with self-developed telemetry system, which had multi-channels and high rotational speed. After some losses were compensated, the heat transfer coefficients of the rotor endring and fan surfaces were measured. Minimum heat transfer region was existed with endcap plate distance and maximum heat transfer was found at some rotor fan width. It was also studied that how the guide plate and endcap inside rib effected on the rotor heat transfer. The higher heat transfer were obtained with decreasing guide plate distance, increasing the number and height of endcap inside rib. The correlation equations of the results were obtained and compared with others. Above results of the heat transfer coefficients can be used as basic data for cooling design of the various kind of motors.

• The Korean Journal of Food & Health Convergence
• /
• v.8 no.2
• /
• pp.15-27
• /
• 2022

This study aims to analyze the relative importance of bone age and chronological age in physique according to gender and to identify the relative importance of bone age, chronological age, and physique in physical fitness and motor coordination according to gender in order to alleviate the imbalance between physique and physical fitness in children. A total of 666 children(346 males, 320 females) between the ages of 11-14 were enrolled as subjects, and the skeletal maturation The skeletal maturation were measured by taking hand-wrist. Physical fitness were measured through a total of 4 components: muscular strength. The results of this study. First, physique variables for both males and females aged 11-14 were found to be more significant predictors of bone age than chronological age. Second, for physical fitness in males, in the order of %fat, body water, waist-hip ratio, weight, fat-free mass, and chronological age were more significant predictor variables; and in females, in the order of %fat, fat-free mass, height, chronological age, weight, bone age, fat mass, and body water were more significant predictor variables. For bone age and chronological age in physical fitness, bone age in males and chronological age in females found to be the more representative variables respectively.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3134-3138
• /
• 2007

The objective of this paper is to elucidate the characteristic performance of the mini-vacuum pump with various heights of eccentric shaft. The mini-diaphragm pump is composed of DC motor, eccentric shaft and diaphragm and it is operated by PCB panel. The height of eccentric shaft is changed that controls the quantities of air flow to improve the performance of vacuum pressure. This device is manufactured in order to embody the vacuum pressure with 200 mmHg. The heights of eccentric shaft which is used in present experiment are located in the range from 3 mm to 5.5 mm. The vacuum pressure distributions with each height of eccentric shaft was measured and the results were graphically depicted.

• Journal of Korean Foot and Ankle Society
• /
• v.16 no.2
• /
• pp.79-86
• /
• 2012

Calcaneal fractures account for 2% of all fractures and approximately 60 to 70% of tarsal fractures. These fractures typically are the result of high-energy injury, such as a motor vehicle accident or a fall from a height. The potential for disabling malunion following intrarticular displaced calcaneal fracture is high, regardless of treatment. Fracture displacement typically results in loss of hindfoot height, varus and widening of the hindfoot, with possible subfibular impingement and irritation of the peroneal tendon and/or sural nerve. Frequently, subtalar joint develops posttraumatic arthritis. In symptomatic patients with calcaneal malunion, systemic evaluation is required to determine the source of pain. Nonsurgical treatment, such as activity and shoe modification, bracing, orthoses, and injection, is effective in many patients. Surgical treatment may involve simple ostectomy, subtalar arthrodesis with or without distraction, or corrective calcaneal osteotomy. A high rate of successful arthrodesis and of patient satisfaction has been reported with surgical manamgent.