• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.645-651
• /
• 2007

In general, contours in digital vector maps, which represent terrain characteristics and shape, are created by 3D digitizing the same height points using aerial photographs on the analytical or digital plotters with stereoscopic viewing. Hence, it requires lots of task, and subjective decision and experience of the operators. DTMs are generated indirectly by using contours since the national digital maps do not include digital terrain model (DTM) data. In this study, model key points which depict the important information about terrain characteristics were extracted from the contours. Further, determination of the efficient and flexible grid sizes were proposed to generate optimal DTM in terms of both quantitative and qualitative aspects. For this purpose, a progressive sampling technique was implemented, i.e., the smaller grid sizes are assigned for the mountainous areas where have large relief while the larger grid sizes are assigned for the relatively flat areas. In consequence, DTMs with multi-grid for difference areas could be generated instead of DTMs with a fixed grid size. The multi-grid DTMs reduce computations for data processing and provide fast display.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.3
• /
• pp.67-76
• /
• 2016

The railway bridge abutment subjected to the lateral earth pressure is a sensitive structure that is affected by backfill materials, installation methods, compaction, and drainage system and so on. The several design loads for the bridge abutment design consist of traffic loading on bridges and vertical & lateral force due to surcharge load at backfill. Especially, the lateral earth pressure of design load components is important and considered in the design of geotechnical engineering structure such as bridge abutment wall. The determination of cross section for abutment is finally determined with calculating external stability and member force of abutment wall structures. In this study, the abutment wall height is 12m and the optimal cross section of abutment wall has been determined that satisfies an external stability for abutment structure through friction angles of 35, 40, and 45 degrees of backfill materials. The external stability and member force of abutment wall with friction angle of backfill materials and were calculated and construction cost of each abutment wall structures was compared. It found that the construction cost was reduced from 2.2 to 8.4% with friction angle of backfill materials.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.457-464
• /
• 2017

This study has utilized the stand density management diagram to devise an efficient management standard for the stand density for Pinus densiflora that secures the health of the stands and predicted the harvest goals. The appropriate stand control level was estimated by modeling the relationship of the relative yield index (Ry) to the ratio of slender trees within the stand through an exponential function; the coefficient of determination ($R^2$) was found to be 0.424 according to the estimation. The ratio of slender trees within the stand showed a tendency of rapid increase at a certain relative yield index; with this relational function, the appropriate Ry value of 0.84 was obtained. By estimating the curve of the Ry value 0.84, which was the appropriate stand density management level, as well as the height of dominant trees in the central region of Korea, the production objective for each site index was set. Assuming that the final age by the site indices ranged from 10 to 16 for the P. densiflora in central region of Korea, the number of production was estimated to be between 426 to 1,311 trees per ha. It was predicted that the production of medium-diameter logs larger than 30 cm in diameter is possible for the target DBH at a site index of more than 16; small-diameter logs larger than 20 cm in diameter for site indices 12 and 14 enabled, and small-diameter logs of less than 20 cm for site index 10.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.431-438
• /
• 2017

This study investigated the effect of pre-planting nitrogen (N) fertilization levels added to a soilless root medium on the growth of 'Dotaerang Dia' tomato seedlings. The N levels were varied for a total of 7 treatments: 0, 100, 250, 500, 750, 1,000, or $1,500mg{\cdot}L^{-1}$. The pH of the root media gradually rose in all treatments as the seedlings grew; however, the differences in the pH were not significant among the treatments. The electrical conductivity (EC) of the root media was significantly different among the treatments from sowing to week three, then drastically decreased after week four, which diminished the differences in the EC among the treatments. At week six, plant height, leaf length, leaf width, number of leaves, and fresh and dry weights of the shoot were highest for the treatment with $500mg{\cdot}L^{-1}N$. In contrast, the treatment with $1,500mg{\cdot}L^{-1}N$ had the lowest results for all growth measurements. The fresh weight was 67% heavier in the $500mg{\cdot}L^{-1}N$ treatment compared to the $1,500mg{\cdot}L^{-1}N$ treatment. The total N content in the tissues was lowest in the treatment with $0mg{\cdot}L^{-1}N$ and highest in the treatment with $1,000mg{\cdot}L^{-1}N$. The contents of calcium (Ca), magnesium (Mg), and metal micronutrients in the tissues were highest in the $250mg{\cdot}L^{-1}N$ treatment. A previous study demonstrated that adjusting the fertilization level to promote growth to over 90% of the maximum growth is a good strategy for lowering production costs and preventing damage due to excessive fertilizer absorption by crops. Our results indicated that the optimal pre-planting N fertilization level for tomato plug seedlings should be lower than $500mg{\cdot}L^{-1}$ and the optimum tissue N contents should be around 3.21% to 4.60%.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1161-1161
• /
• 2001

Rapid cost-effective methods of measuring wood quality are extremely important to tree improvement programs where it is necessary to test large numbers of trees. Non-destructive sampling of a forest can be achieved by using increment cores generally removed at breast height. At CSIRO Forestry and Forest Products methods for the rapid, non-destructive measurement of wood properties and wood chemistry based on increment core samples have been developed. In this paper the application of near infrared (NIR) spectroscopy to the prediction of a range solid wood properties, including density, longitudinal modulus of elasticity (E$\sub$L/) and microfibril angle (MFA), is described. Experiments conducted on individual species (Eucalyptus delegatensis and Pinus radiata), the two species combined and a number of mixed species from several genera are reported. NIR spectra were obtained from the radial/longitudinal face of each sample and used to develop calibrations for the measured physical properties. When the individual species were used the relationships between laboratory determined data and NIR fitted data were good in all cases. Coefficients of determination (R$^2$) ranging from 0.77 for MFA to 0.93 for stick density were obtained for E. delegatensis and R$^2$ ranging from 0.68 for MFA to 0.94 for strip density were obtained for P. radiata. The calibration statistics for the combined E. delegatensis and P. radiata samples were similar to those found for the individual species. As these results indicated that it might be possible to produce general calibrations based on samples from a number of species of a single genus or samples from a number of different genera, a wide range of species was subsequently tested. Good relationships were obtained for both density and E$\sub$L/. These calibrations had R$^2$ that were slightly lower than those determined using individual species and standard errors that were higher. The mixed species calibrations, when applied to the E. delegatensis and P. radiata sample sets, provided good estimates of density (stick and strip) and E$\sub$L/. The results demonstrated that a mixed species calibration, that encompasses wide variation in terms of, wood anatomy, chemistry and physical properties, could be used to rank trees. Experiments reported in this paper demonstrate that solid wood properties can be estimated by NIR spectroscopy. The method offers a rapid and non-destructive alternative to traditional methods of analysis and is applicable to large-scale non-destructive forest resource assessment, and to tree breeding and silvicultural programs.

• Journal of Korean Society of Forest Science
• /
• v.107 no.1
• /
• pp.35-42
• /
• 2018

This study was carried out to investigate site and soil factors affecting growth of root collar diameter (RCD) and height (HT) of Larix kaempferi trees planted in harvested Larix kaempferi plantations. We were found effect factors of growth of RCD and HT using 15 of site and soil factors. And then we made the growth estimated equations of RCD and HT of 6-years-old L. kaempferi tree by the derived affecting factors. The growth of RCD was affected in order of available phosphorus (+), effective soil depth (+), organic matter (-), sand separate in soil (-), pH (-), and elevation (-), and the coefficient of determination ($R^2$) of the growth estimated equation of RCD was 0.51. The growth of HT was affected in order of effective soil depth (+), elevation (-) slope (-), and available phosphorus (+) and the $R^2$ of the growth estimated equation of HT was 0.46. The growth of RCD and HT were commonly affected by effective soil depth, available phosphorus, and elevation. Therefore, planting site of L. kaempferi should be considered the mainly effect factors in order to keep better early growth based on the current study.

• Atmosphere
• /
• v.26 no.3
• /
• pp.357-372
• /
• 2016

Northeast Asian regions have recently become the main source of anthropogenic and natural aerosols. Measurement of aerosols on the sea in these regions have been rarely conducted since the experimental campaigns such as ACE-ASIA (Asian Pacific Regional Aerosol Characterization Experiment) in 2001. Research vessel observations of aerosol mass and chemical composition were performed on the Yellow and south sea around the Korean peninsula. The ship measurements showed six representative cases such as aerosol event and non-event cases during the study periods. On non-event cases, the anthropogenic chemical and natural soil composition on the Yellow sea were greater than those on the south sea. On aerosol event cases such as haze, haze with dust, and dust, the measured mass concentrations of anthropogenic chemical and element compositions were clearly changed by the events. In particular, methanesulfonate ($MSA^-$, $CH_3SO_3^-$), a main component of natural oceanic aerosol important for sulfur circulation on Earth, was first observed by the vessel in Korea, and its concentration on the Yellow sea was three times that on the south sea during the study period. Sea salt concentration important to chemical composition on the sea is related to wind speed. Coefficients of determination ($R^2$) between wind speed and sea salt concentration were 0.68 in $PM_{10}$ and 0.82 in $PM_{2.5}$. Maximum wave height was not found to be correlated to the sea salt concentration. When sea-salt comes into contact with pollutants, the total sea-salt mass is reduced, i.e., a loss of $Cl^-$ concentration from NaCl, the main chemical composing sea salt, is estimated by reaction with $HNO_3$(gas) and $H_2SO_4$(gas). The $Cl^-$ concentration loss by $SO_4^{2-}$ and $NO_3^-$ more easily increased for $PM_{10}$ compared to $PM_{2.5}$. The results of this study will be applied to verifying a dust-haze forecasting model. In addition, continued vessel measurements of aerosol data will become important to research for climate change studies in the future.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.18
• /
• pp.7897-7907
• /
• 2014

Background: There is paucity of studies defining the prevalence of non-communicable disease (NCD) risk factors in Saudi Arabia despite the surging epidemic of obesity, change in dietary habits and sedentary lifestyle. Objectives: This cross-sectional study aimed to assess the prevalence of NCDs risk factors among employees at King Faisal University in Al Hassa, Saudi Arabia and to determine the possible correlates for clustering of NCDs risk factors among them. Materials and Methods: All employees were invited to participate; the World Health Organization STEPwise approach was used for data collection which consisted of a personal interview to collect socio-demographic characteristics, NCD history, tobacco use, vegetables and fruit consumption, and physical activity (PA), followed by anthropometric measurements namely weight, height and waist circumference and blood pressure measurements, subjects were finally subjected to biochemical tests with determination of fasting plasma glucose, serum triglycerides, cholesterol and high density lipoproteins. Results: Of the surveyed employees (n=691), daily current smokers accounted for 22.7%. 94.9%, 95.1% and 86% consumed < 5 servings per day of vegetables, fruits and both fruits and vegetables respectively, 73% were physically inactive, 64% were overweight or obese, 22.1% had hypertension, and 21.5% were diabetics. Elevated cholesterol levels were found in 36.6%, low high density lipoproteins in 36.8%, and elevated triglycerides in 36.1%. Only 3% had no NCD risk factors, and 57.6% had ${\geq}3$ factors. Multivariate logistic regression showed that gender (being male, adjusted odds ratio 'aOR'=1.51), aged ${\geq}50$ years (aOR=3.06), < college education (aOR=1.75), current smokers (aOR=2.37), being obese (aOR=6.96) and having a low PA level (aOR=4.59) were the significant positive predictors for clustering of NCD risk factors. Conclusions: Over fifty percent of the studied university's employees had multiple (${\geq}3$) NCD risk factors. Screening and health promotion initiatives should be launched at least targeting the modifiable factors to avert the excessive risk for cardiovascular disease, diabetes mellitus and several types of cancers.

• YAKHAK HOEJI
• /
• v.44 no.3
• /
• pp.224-231
• /
• 2000

$Nokyangbotang^{TM}$ (NYBT) is a kind of powerful food for health and have been drunk at a oral dose of 80 ml (99.5 mg) three times per day: It has not been well studied about the anti-fatigue and hepatoprotective activity. In this experiments, we evaluated pathophysiologically the effect of NYBT on swimming time in mouse and hepatoprotective activity in rats intoxicated with carbon-tetrachloride. NYBT was nontoxic in orally acute toxicity test ($LD_{50}$, 320 ml/60 kg): a nontoxic food in more four times of one-shoot dosage (80 ml) to human. Weight-loaded forced swimming test was carried out to measure the swimming time of mice with a 4% load of body weight in plastic cylinder (diameter $10{\;}cm{\;}{\times}{\;}height{\;}20{\;}cm$) on water bath at $25^{\circ}C$, and the anti-fatigue activity represented the ratio of swimming time of experimental group to that of control group. NYBT had dose-dependent anti-fatigue activity Mice administered NYBT at a dose of 320 ml/60 kg once daily for 5 days could swim about two times more than control. Hepatoprotective activities of NYBT were examined by the determination of malonedialdehyde (MDA) and pathological survey in liver and liver function test of rat intoxicated with $CCl_4$ at i.m. dose of 2 ml/kg once daily for 7days. NYBT decreased dose-dependently thiobarbituric acid reactive substance: Oral administration of NYBT at a dose of 20 ml/60 kg was $38.51{\;}{\pm}{\;}3.02$ nmol MDA/g of tissue, that of 80 ml/60 kg was $33.76{\;}{\pm}{\;} 1.84$ nmol MDA/g of tissue, and that of 320 ml/60 kg was $32.87{\;}{\pm}{\;}1.90$ nmol MDA/g of tissue as compared with control group ($43.61{\;}{\pm}{\;}2.85$ nmol MDA/g of tissue). All rats administered NYBT at a dose of 320 ml/60 kg were survival as compared with 40% survival of control animals, and GPT activity of rats administered NYBT at a dose of 80 ml/60 kg was decreased as compared with control. In histopathological survey, NYBT improved slightly the fatty changes of hepatocytes around centrilobular area. These results suggest that NYBT has anti-fatigue and hepatoprotective activity in rats and mice.

• Tunnel and Underground Space
• /
• v.27 no.1
• /
• pp.50-57
• /
• 2017

In this study, the experiment for determining shock loss at the branch is conducted for the design of network double-deck road tunnel ventilation. The shock loss coefficient that determines the quantity of shock loss has been considered only regarding the constant aspect ratio of circular or rectangular section. However the suggestion of shock loss coefficient is needed since the aspect ratio of double-deck road tunnel for small vehicle is considered around 1:3 with the low height in Korea. The experiment model was made with the scale of around 1:23 applying Reynolds similarity law, so that the shock loss coefficient on the branch of the large aspect ratio was measured. The result of the study showed that shock loss coefficients of both split branch and straight branch were measured two to three times higher than those calculated from the theoretical equation or design values of previous studies. Therefore the study resulted the effect of large aspect ratio on shock loss coefficient was huge, and it is expected that precise design value can be suggested for the design of network double-deck tunnel ventilation.