• Journal of Energy Engineering
• /
• v.11 no.4
• /
• pp.350-358
• /
• 2002

The present work determined the flame structure characteristics of coal syngas combusted inside swirl burners with various nozzle types. Fuel nozzle types are largely classified into two groups of axial and tangential. Experiments were carried out for investigating the effects of fuel nozzle geometry, fuel composition ratio, heating rate, excess air, and degree of swirl on the turbulent diffusion flame structure. To determine the characteristics of the flame structure, axial type fuel nozzle diameter of laboratory-scale combustor is varied to 1.23, 1.96, and 2.95 ㎜ and the direction of tangential type nozzles are varied to radial, clockwise, and counter-clockwise. The comparison of the experimental results was performed to understand functional parameters relating the flame structure. Data analysis showed that the vertical straight flame height generally decreased with increasing swirl number and decreasing axial type nozzle diameter. Flame height established with tangential type nozzle is 3 times shorter than that with vertical type. The flame structures among the 3 different tangential fuel nozzles relatively showed no particular difference. By increasing the heating rate, the width of flame increased generally in both vertical and tangential flame. Within the present experimental parameters of the investigation, flame structure is mainly depends on the nozzle type of the combustor. The visually investigated flame lengths are confirmed through the analysis of temperature profile of each flame.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.8
• /
• pp.580-588
• /
• 2009

This paper summarizes the experimentally-measured performance of small-scale, vertical-axis wind turbine for the purpose of improving the aerodynamic efficiency and its controllability. The turbine is designed to have a Savonius-Type rotor with an inlet guide-vane and an side guide-vane so that it achieves a higher efficiency than any lift- or drag-based turbines. The main design factors for this high-efficient, vertical wind turbine are the number of blades (Z), and the aspect ratio of Height/Diameter (H/D) among many. The basic model has the diameter of 580mm, the height of 464mm, and the blade number of 10. The maximum power coefficient of 0.50 was experimentally measured for the above-mentioned specifications. The inlet-guide vane ensures the maximum efficiency when the angle of attack to the rotor blade lies between $15^{\circ}$ and $20^{\circ}$. This experimental results for the vertical-axis wind turbine can be applied to the preliminary design of turbine output curve based on the wind characteristics at the proposed site by controlling its aerodynamic performance given as a priori.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.395-402
• /
• 2017

The local heat transfer and total pressure drops of developed turbulent flows in the ribbed rectangular convergent/divergent channels with ${\Lambda}/V-shaped$ ribs have been investigated experimentally. The channels have the exit hydraulic diameter ($D_{ho}$) to inlet hydraulic diameter ($D_{hi}$) ratios of 0.67 for convergence and 1.49 for divergence, respectively. The ${\Lambda}/V-shaped$ ribs with three different flow attack angles of $30^{\circ}$, $45^{\circ}$, and $60^{\circ}$ are manufactured with a fixed rib height (e) of 10 mm and the ratio of rib spacing (S) to height (e) of 10 on the walls. Thermal performances of the ribbed rectangular convergent/divergent channels are compared with the smooth straight tube under identical pumping power. The results show that the flow attack angle of $45^{\circ}$ with ${\Lambda}-shaped$ rib has the greatest thermal performance at all the Reynolds numbers studied in the convergent channel; whereas, the flow attack angle of $60^{\circ}$ with V-shaped rib has the greatest thermal performance over Reynolds number of 30,000 in the divergent channel.

• Journal of Bio-Environment Control
• /
• v.10 no.1
• /
• pp.55-60
• /
• 2001

To investigate the effect of red light (R) and far-red light(FR) on controlling the growth of tomato transplants, height, length of 1st internode, and stem diameter of plant were measured every 12 days during 24 days of light treatment. At the end of experiment, fresh and dry weights of roots and shoots were measured. Generally, it was shown that the height of plant was suppressed by the treatment of FR. However, the effect of light-treatment time (10 or 20 min) on plant height was not significant. Stem diameter of the plant treated with R was greater than that of the plant treated with FR or the control. Dry weight ratio of shoot to root of the plant treated with R was smaller that of the plant treated with FR. R was more effective than the control, which was more effective than FR, in making the transplant compact.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.107-107
• /
• 2009

Micro pillar structure was investigated for the energy havesting applications. The micro pillar structures were investigated to find proper size of pillars. In this experiments, the aspect ratio between the height and diameter were changed to extract maximum peizoelectric coefficient. We proposed the idea and model for the energy harvesting systems based on the micro-pillar structure.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.602-613
• /
• 2010

Background: As life expectancy has been increased, the cardiac valve disease has been increased. In past, mechanical valve for valve replacement surgery was used widely, but it has many weaknesses, such as hemorrhage, teratogenic effect caused by warfarin, acute mechanical failure, taking warfarin during life, etc. So, the tissue valve is used widely and researches for durability of tissue valve are in progress. Tissue valves being used are all imported in Korea, and there is a lack of information on its geometry and design. So, we studied the geometry of porcine aortic and pulmonary valve, and tried to suggest theoretical basis for making the aortic and pulmonary valve. Material and Method: We harvested aortic and pulmonary valves of 25 pigs and measured the geometry of valve at fresh and glutaraldehyde (GA) fixed state. In each group, we measured the diameter of the base, diameter of commissure, valve height, commissural height, etc. Also, for making implantable porcine and bovine pericardial valve, we designed the valve stent form, thickness, height, and leaflet size, form, thickness by different size of valve. Result: The aortic and pulmonary valve geometry and ratio were measured in each group. The right coronary cusp of aortic valve and right facing cusp of pulmonary valve was bigger than other cusps and non coronary cusp was smaller than others (RCC: NCC : LCC=1 : 0.88 : 1). Valve height was correlated to the leaflet size. We designed the outer diameter of stented porcine aortic valve from 19 mm to 33 mm and designed stent height and width, using previous measured ratio of each structure, stent thickness, working thickness (for making valve). Also, we designed the size of stent and form for stented bovine pericardial valve, considering diameter of valve, leaflet length, height and leaflet minimum coaptation area. Conclusion: By measuring of 25 pig's aortic and pulmonary valve geometry and ratio, we can make theoretical basis for making implantable stented porcine valve and bovine pericardial valve in various size. After making implantable valve using these data, it is necessary to do in vivo and in vitro researches, furthermore.

• Korean Journal of Plant Resources
• /
• v.26 no.4
• /
• pp.503-510
• /
• 2013

This study was conducted to determine the optimum intensity of root pruning and the initial seedling size of 1-year-old Quercus serrata for producing 2-year-old healthy seedlings. Large( > 26 cm hight) and small size ( < 24 cm hight) seedlings were pruned their root by the length of 5, 10, and 15cm and then transplanted on nursery. Stem height, root-collar diameter(RCD), height to RCD ratio(H/D ratio), shoot dry weight(DW) and root development were measured during first growing season after transplanting. Seedling size and pruning intensity influenced on shoot growth such as height, RCD, H/D ratio and DW after transplanting. In addition, the development of lateral roots such as number, length, DW and diameter were affected by the seedling size. Taproot pruned by 15cm was shown excellent above-ground growth in large seedling group, but pruned by 10 and 15cm showed respectively better shoot growth in small seedling group. Large seedlings increased their above-ground growth, taproot regrowth, and number of lateral roots more than those of the small seedlings. But the length and DW of lateral roots were increased in the small seedlings. In conclusion, in order to produce high quality 2-year-old seedlings, it is important to produce large size of Q. serrata seedlings. Also root pruning length of 1-year-old Q. serrata was reasonable on 15 cm in taller than 26 cm or 10cm in less than the height.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.3
• /
• pp.98-106
• /
• 2014

The effect of blockage ratio on wind tunnel testing of small vertical-axis wind turbine has been investigated in this study. Height and rotor diameter of the three blades Darrieus vertical axis wind turbine used in present test were 0.4m and 0.35m respectively. We measured the wind speeds and power coefficient at three different wind tunnels where blockage ratio were 3.5%, 13.4% and 24.7% respectively. The test results show that the measured powers have been strongly influenced by blockage ratio, generally increased as the blockage ratio increases. The maximum power at higher blockage ratio has been obtained at relatively high tip speed ratio compared with that at low blockage ratio. The measured power coefficients under high blockage ratio can be improved from proper correction using the simple correction equation based on blockage factor. In present study, the correction error for power coefficient can be less than 5%, however correction effectiveness reveals relatively poor at high blockage ratio and low wind speed.

• Water for future
• /
• v.6 no.1
• /
• pp.5-12
• /
• 1973

A simple regression formula for estimating the lake evaporation rate from the copper-plated pan (diameter 20cm, height 10cm) is derived. A comparison with other formulae indicates that the formula is more accurate than others. An annual map of man evaporation in Korean peninsula has been prepared using the relation. It demonstrates the areal average distribution of mean annual evaporation from a free water surface with no heat storage effect and avected energy owing to differences in the temperature of in-and outflow. The mean annual ratio of the lake to the copper-plated pan evaporation is found to be 0.64. The ratio varies with local conditions from 0.62 to 0.66, and hence it can be considered fairly uniform. However the seasonal variation of the ratio appears to be rather significant. It changes from the lowest of 0.61 to the highest of 0.75.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.6 s.27
• /
• pp.55-61
• /
• 2004

A numerical procedure for optimizing the shape of three-dimensional sedimentation tank is presented to maximize its sedimentation efficiency. The response surface based optimization is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis for multi-phase flow. Standard $k-{\epsilon}$ model is used as a turbulence closure. Three design variables such as, tank height to center feed wall diameter ratio, blockage ratio of center feed wall and angle of distributor are chosen as design variables. Sedimentation efficiency is defined as an objective function. Full-factorial method is used to determine the training points as a means of design of experiment. Sensitivity of each design variable on the objective function has been evaluated. And, optimal values of the design variables have been obtained.