• Economic and Environmental Geology
• /
• v.33 no.1
• /
• pp.31-40
• /
• 2000

Sorption characteristics of Pb, Cu, Cd, and Zn onto Ca- and Na-bentonites were investigated by the batch experiments in the condition of various pHs and concentrations of groundwater major anions (${So_4}^{2-}$ and ($HCO_3$), which can form a complex with heavy metals. The sorption removal of heavy metals steadily increases as pH increases. The sorption capability about heavy metals of both Ca-bentonite and Na-bentonite is in the order of Pb>Cu>Zn>Cd. The effect of pH and selectivity of heavy metals of bentonites were explained by the change of surface charge of bentonite and the speciation of heavy metals. Na-bentonite has a little higher sorption ability about heavy metals than that of Ca-bentonite. A high sorption removal of Pb in 0.1M sulfate solution may be attributed to the precipitation of $PbSo_4$(anglesite). However, sulfate has a slight effect on the sorption of CU, Cd and Zn. More than 99% of heavy metals were removed from the 0.1 M bicarbonate solution. However, the efficiency of sorption removal of heavy metals highly decreases in the bicarbonate solution of $10^{-2}$M to $10^{-4}$M. The speciation and saturation index calculated by the WATEQ4F program indicate that the sorption of anionic complexes such as ${Pb(CO_3)_2}^{2-}$, ${Cd(CO_3)_2}^{2-}$, ${Zn(CO_3)_2}^{2-}$, ${Cu(CO_3)_2}^{2-}$ and the precipitation of the solid phases such as $PbCO_3$(cerrusite), $ZnCO_3$(smithsonite), $CdCO_3$(obtavite) are involved in sorption removal of heavy metals in bicarbonate solution. The sorption capability about heavy metals of bentonites in the presence of anions shows the following order: Pb>Cu Cd>Zn.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.787-798
• /
• 2005

The objectives of this study were to assess extraction kinetics of heavy metals with extraction times and to assess extraction efficiencies of heavy metals with concentrations and kinds of washing solutions. Target materials were obtained from disused metal mines. Washing solutions were water, HCl(0.1, 0.3, 1.0 N), EDTA(0.01, 0.05, 0.1 M), and sodium dodecyl sulfate(SDS, 0.1. 0.5, 1.0%). Extraction efficiencies of heavy metals by water and SDS were below 1%, and extraction efficiencies of Zn and Cd were higher than those of Pb and Cu. As results, water and SDS were not effective in extracting heavy metals from mine tailings as washing solution, but extraction efficiencies of Pb and Cu with SDS solution increased as extraction time increased. Extraction kinetics of heavy metals with HCl and EDTA were faster than those with water and SDS. The majority of heavy metals were extracted within 6 hours, and extraction kinetics was almost independent of the solution concentration. Extraction kinetics of heavy metals after 6 hours was slow, but extraction kinetics was dependent on the solution concentration. Also, as concentrations of HCl and EDTA solution were stronger, heavy metals were extracted rapidly and extraction efficiencies were increased. The extraction efficiency was high in order of Cd>Pb>Zn>Cu in using 1.0 N HCl, and Pb>Cd>Zn>Cu in using 0.1 M EDTA. Consequently, extraction effectiveness was highest for Pb in using HCl, and for Pb and Cd in using EDTA with concentration increase. Extraction time of over 6 hours was not effective in extracting heavy metals.

• Journal of Environmental Science International
• /
• v.3 no.4
• /
• pp.409-416
• /
• 1994

This study was Performed to evaluate the contents of heavy metals in water, sediment and soil of the 7 different sampling points along the West Nakdong river, The results were as follows: the concentrations of Zn, p, Pb, Cd, Mn, Cu and As in the sediment were 197.48, 551.85, 67.01, 2.54, 491.39, 42.95 and 10.52ppm, respectively. The concentrations of Zn, p, Pb, Cd, Mn, Cu and As in the soil was 83.32, 482.89, 17.15, 1.02, 226.02, 26.15 and 7.29ppm, respectively. The concentration ratios of heavy metals In the water to the sediment were 593 - 12700 (Cd >> Cu > Zn > Mn > As > Pb) and that of the water to the soil were 152 - 5100 (Cu > Cd > Zn > Mn > As >Pb). The correlation coefficients of Cu and Pb weve high among the water, sediment and soil. Because the accumulation amounts of heavy metal in the sediment were high, the concentration of heavy metals in the sediment was higher than in soil. The correlation coefficient of heavy metals among water, sediment and soil was high (0.79 - 0.95). Key Words Distribution Characteristics, heavy metals, West Nakdong River.

• Journal of Korean Society of Forest Science
• /
• v.87 no.4
• /
• pp.584-589
• /
• 1998

The study was carried out to investigate heavy metals of rainfall and soil at industrial, urban and rural area, and to estimate the relationship between rainfall and soil. Heavy metals of stemflow, throughfall and rainfall in Pinus thunbergii and Quercus spp were ordered Zn>Cu>Pb>Cd in industrial area, and Zn>Pb>Cu>Cd in urban area. All heavy metals were detected high in industrial areas, and especially those of industrial area were high in stemflow. Heavy metals in soil by distance from stem were highest in 20cm distance from stem. Soil heavy metals in survey sites were the same order as those of rainfall. The correlation of heavy metals between rainfall and soil were positive, the regression obtained was as follows ; Zn was Y=7.79+4.78X($r=0.8685^{**}$), Pb was Y=7.90+4.53X($r=0.7242^*$) and Cu was Y=3.89+3.91X($r=0.8658^{**}$).

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_3
• /
• pp.139-148
• /
• 2001

Heavy metals such as Cu, Ni, Cd, and Pb were chemically extract from the contaminated soils using the chelating agents, EDTA and DTPA. These chemical extraction have been focused on its applicability to a wide range of soils. Results of extractive efficiency for heavy metal follow the order : Cu-EDTA $\geq$ Ni-EDTA > Pb-EDTA > Cd-EDTA > Cu-DTPA> Pb-DTPA. This result is coincided with order of conditional formation constants(Kr) of metal-chelate agent. The second study involved the recovery of the metals and EDTA from complex solutions by an electromembrane process. The overall processes of regeneration, recovery, and reuse were evaluated. The electrochemical studies showed that copper could be chosen as an electrode to plate Cd, Cu, and Pb. At least 95% of 75 of EDTA and associated Cu or Pb could be recovered by the electromembrane process. Recovery of Cd by electodeposition was not possible with the copper electrode. The percent EDTA recovery is equal to the percentage of metal electroplated from the chelates.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.275-281
• /
• 1996

When soybean was cultivated in the polluted soil with heavy metals, the content of these heavy metals affected. The results were summarized as follows. 1. The growth of soybean was remarkably poor and the content of heavy metals in polluted soil were higher than in unpolluted soil. 2. In leaves of all surveyed crops, the content of Zn, Cu, Pb, Cd and As was higher in soybean, followed by corn and rice. 3. Except for Pb, the content of heavy metals in the leaves of soybean was higher than in the stem of soybean, and the components of heavy metals in each part of soybean were shown in order of Zn > As > Cd > Cu > Pb. 4. The relationship between the content of Zn, Cu, Pb, Cd, As and the growth of soybean was negatively correlated, respectively. 5. A higher correlation seemed to exist among the content of Zn, Cu, Pb, Cd, As in soil, of Zn, Cu and As in soybean leaves, and of Pb, Cd and As in stems of soybean. The results indicated that heavy metals were absorbed and accumulated by plants grown in the polluted area.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.27-33
• /
• 2007

Heavy metals in the surface seawaters and sediments were measured in Jinhae Bay. The high concentrations of heavy metals in the seawaters were found at the stations near the islands. In the sea waters, the mean concentrations of dissolved heavy metals except for Pb were not higher than previous data in this bay. Higher heavy metal contents in the surface sediments were observed at the stations adjacent to the Kojedo or Kadukdo of the Kadoksudo. The contents of Co, Ni, Zn, Cu, As and Cd in the surface sediments showed relatively high correlation coefficients with IL and COD. The order of enrichment factors(EFs) of heavy metals in the sediments was As>Cd>Pb>Zn>Co>Cu>Hg>Ni, and the EFs of As, Cd, Pb and Zn were higher than 1.

• Korean Journal of Veterinary Service
• /
• v.33 no.3
• /
• pp.299-302
• /
• 2010

This study was conducted to determine the content of heavy metals in meats available on the Korean markets. Trace metals (Pb, As and Cd) were detected in 4 kinds, 172 samples by inductively coupled plasma-mass spectrometry (ICP-MS). The values of heavy metals in meats were as follows; In beef, mean (minimum~maximum) values of the heavy metals were Pb: 0.075 (0.020~0.190)mg/kg, As: 0.010 (0.001~0.050)mg/kg and Cd: 0.43(0.07~2.11)${\mu}g/kg$. In pork, mean (minimum~maximum) values of the heavy metals were Pb: 0.065 (0.012~0.171)mg/kg, As: 0.004 (ND~0.021)mg/kg and Cd: 0.43(0.08~1.09)${\mu}g/kg$. In chiken, mean (minimum~maximum) values of the heavy metals were Pb: 0.060(0.016~0.211)mg/kg, As: 0.008 (ND~0.042)mg/kg and Cd: 0.42 (0.02~3.80)${\mu}g/kg$. In duck, mean (minimum~maximum) values of the heavy metals were Pb: 0.070 (0.011~0.157)mg/kg, As: 0.005 (0.001~0.011)mg/kg and Cd: 0.87 (0.15~3.75)${\mu}g/kg$. This results will be used as a basic data for the future legislation on the regulation and control of heavy metal in meats.

• Environmental Engineering Research
• /
• v.18 no.3
• /
• pp.177-189
• /
• 2013

Studies were carried out on the speciation of heavy metals (Zn, Cu, Mn, Fe, Ni, Pb, Cd, and Cr) during rotary drum composting of water hyacinth (Eichhornia crassipes) for a period of 20 days. Five different proportions of cattle manure, water hyacinth and sawdust were prepared for composting. This study concluded that, rotary drum was very efficient for the degradation of organic matter as well as for the reduction of mobility and bioavailability of heavy metals during water hyacinth composting. The results from the sequential extraction procedure of heavy metals shows that rotary drum composting changed the distribution of five fractions of Zn, Cu, Mn, Fe, Ni, Pb, Cd, and Cr. The highest reduction in the bioavailability factors of Pb and Cd was observed during the process. The total concentration of Cu, Cr, and Cd was very low compared to the other metals (Zn, Mn, Fe, Ni, and Pb); however, the percentage of exchangeable and carbonate fractions of these metals was similar to other metals. These results confirmed that the bioavailability of metals does not depend on the total concentration of metals. From this study, it can be concluded that the addition of an appropriate proportion of cattle manure significantly reduced the mobile and easily available fractions (exchangeable and carbonate fractions) during water hyacinth composting in rotary drum.

• Korean Journal of Veterinary Service
• /
• v.22 no.1
• /
• pp.1-7
• /
• 1999

This study was performed to investigate the contents of the heavy metals such as cadmium(Cd), copper(Cu), iron(Fe), lead(Pb) and zinc(Zn) in meat and meat products. For this experiment, each 20 samples of beef and pork were collected at slaughterhouse in Seoul areas and 45 samples of meat products(ham, sausage, processed meat and seasoned meat) were purchased from commercial food markets. The contents of the heavy metals was determined by atomic absorption spectrophotometry from Jan. to Nov. In 1998. The results obtained were summarized as follows ; 1. In Korean native beef, mean values of the heavy metals(mg/kg) were Pb : 0.14$\pm$0.10, Cd : 0.07$\pm$0.02, Cu : 1.73$\pm$0.95, Zn : 42.82$\pm$8.17 and Fe : 67.43$\pm$24.18, respectively. 2. In imported beef, mean values of the heavy metals(mg/kg) were Pb : 0.03$\pm$0.08, Cd : 0.06$\pm$0.02, Cu : 1.41$\pm$0.62, Zn : 42.93$\pm$4.95 and Fe : 40.06$\pm$12.77, respectively. 3. In pork, mean values of the heavy metals(mg/kg) were Pb : not detected, Cd : 0.09$\pm$0.02, Cu : 1.08$\pm$0.23, Zn : 19.49$\pm$6.02 and Fe : 30.21$\pm$10.51, respectively. 4. In ham, mean values of the heavy metals(mg/kg) were Pb : trace, Cd : trace, Cu . 1.19$\pm$0.46, Zn : 13.58$\pm$4.99 and Fe : 31.43$\pm$11.74, respectively. 5. In sausage, mean values of the heavy metals(mg/kg) were Pb : 0.15$\pm$0.34, Cd : 0.08$\pm$0.05, Cu : 1.15$\pm$0.46, Zn : 13.70$\pm$7.13 and Fe . 27.28$\pm$15.05, respectively. 6. In processed meat, mean values of the heavy metals(mg/kg) were Pb : 0.08$\pm$0.13, Cd : 0.09$\pm$0.04, Cu : 1.28$\pm$0.60, Zn : 14.72$\pm$7.09 and Fe : 24.04$\pm$10.33, respectively. 7 In seasoned meat, mean values of the heavy metals(mg/kg) were Pb : 1.05$\pm$2.21, Cd : 0.13$\pm$0.03, Cu : 1.06$\pm$0.16, Zn : 17.53$\pm$8.72 and Fe : 26.76$\pm$9.02, respectively.