• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.474-477
• /
• 1991

The preferential transport phenomena of neutral cation-anion moieties in neutral macrocycle-facilitated emulsion liquid membrane were described in this study. Emulsion membrane systems consisting of (1) aqueous source phase containing 0.001 M M($NO_3$)$_2(M=Mn^{2+},\;Co^{2+},\;Ni^{2+},\;Cu^{2+},\;Zn^{2+},\;Sr^{2+},\;Cd^{2+},\;and\;Pb^{2+})$ (2) a toluene membrane containing 0.01 M ligand $(DBN_3O_2$, DA18C6, DT18C6, TT18C6, HT18C6) and the surfactant span 80 (sorbitan monooleate) (3% v/v) and (3) an aqueous receiving phase containing $Na_2S_2O_3$ or $NaNO_3$ were studied with respect to the disappearence of transition metal ions from the source phase as a function of time. Cation transports for various two component or three component equimolar mixture of transition metal and $Cu^{2+}$ in a emulsion membrane system incorporating macrocyclic ligand (HT18C6) as carrier were determinded. $Cu^{2+}$ was transported higher rates than the other $M^{2+}$ in the mixture solution. Equilibrium constants for cation-source phase co-anion, cation macrocycle and cation-receiving phase reagent interaction are examined as parameters for the prediction of cation transport selectivities.

• Economic and Environmental Geology
• /
• v.40 no.2 s.183
• /
• pp.209-221
• /
• 2007

Numerical analysis was performed to investigate the effect of heavy metal contamination on neighboring environment in case a dam is constructed by using rockfill materials contaminated by heavy metals. The numerical simulation carried out in this research includes both subsurface flow and contaminant transport in the inside of the CFRD(Concrete Faced Rockfill Dam), using two commercial programs, SEEP2D and FEMWATER. The three representative cases of scenarios were chosen to consider a variety of cases occurring in a dam site; (1) Scenario 1 : no crack in the concrete face slab, (2) Scenario 2 : a crack In the upper part of face slab, and (3) Scenario 3 : a crack between plinth and face slab in the lower part of face slab. As a result of seepage analysis, the amount of seepage in scenario 2 was calculated as $14.31\sim14.924m^3/day$ per unit width, corresponding to the 1,000 times higher value than that in other scenarios. Also, in the simulation of contaminant transport by using FEMWATER, specified contaminant concentration of 13 ppb in main rockfill zone was set to consider continuous leakage from the rock materials. Through the analysis of contaminant transport, we found that elapsed times to take for the contaminant concentration of about 2 ppb to arrive at the end of a dam are as follows. Scenario 1 has the elapsed time of 55,000 years. In Scenario 2. it is 50 years. Finally, scenario 3 has 27,000 years. The rapid transport of the contaminant in scenario 2 was attributed to greater seepage flow by 500 times than other scenarios. Although, in case of upper crack in the face slab, it was identified that the contaminant might transport to the end of a dam within 100 years with about 2 ppb concentration, however, it happened that the contaminant was hardly transported out of the dam in other scenarios, which correspond to either no crack or a crack between plinth and face slab. In conclusion, the numerical analysis showed that the alternative usage of the contaminated sand and gravel as the dam embankment material can be one of the feasible methods with the assumption that the cracks in a face slab could be controlled adequately.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.2
• /
• pp.251-257
• /
• 2008

Food compost, having a higher organic contents than soil, could be an alternative material to prevent the proliferation of heavy metals contamination in soil. In this study we used a convection-dispersion local equilibrium sorption model(CDE) and a two-site non-equilibrium sorption model to find the effects on the adsorption and transportation of Pb by mixing food compost with soil and we also tried to find the effect of velocity and concentration of the injected solution on the characteristics of Pb. We measured Pb concentrations in injection-liquid and in effluent, and then applied them to CXTFIT program. As a result of column experiments, some parameters(D, R, ${\beta}$, ${\omega}$) used in two-site non-equilibrium adsorption model were obtained. Characteristics of Pb adsorption and transport were analyzed using the parameters(D, R, ${\beta}$, ${\omega}$) obtained from the CXTFIT program, We could know that mixed soil with food compost showed a higher adsorption capacity from the retardation factor(R) calculated from the breakthrough curve(BTCs) of Pb. Rs of soil and mixed soil are 20.45, 37.45 respectively, indicating that the adsorption and the transportation characteristics could be accessed quantitatively by using of two-site non-equilibrium adsorption model.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.434-437
• /
• 2003

The fate and the behavior of polycyclic aromatic hydrocarbons (PAHs) and heavy metals in the environment are mainly controlled by their interactions with various components of soils and sediments. Due to their large surface area and abundance in many soils, smectites may greatly influence the fate and transport of the contaminants in the environment. In our experiment, PAH sorption by hexadecyltrimethylammonium (HDTMA)-modified smectite linearly increased in proportion to the amount of HDTMA added on the clay. However, trimethylammonium (TMA)-modified smectite did not show superiority in its sorption of PAH compared with the HDTMA-smectite or dodecyltrimethylammonium (DTMA)-smectite. Meanwhile, the smectites modified with the same cationic surfactants adsorbed Cd$^{2+}$ (heavy metal) significantly from water at low surfactant loading level, but the Cd$^{2+}$ adsorption linearly decreased as the loading of surfactant increased. The result shows that the sorption tendency of organoclays for organic or inorganic contaminants was significantly influenced by the amount and size of the surfactants added on the clay. It means that the stabilization and configuration of cationic surfactant formed on the clay interlayer according to the loading amount of each surfactant of different sizes may be an important factor in effectively sorbing environmental pollutants.nts.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1C
• /
• pp.1-8
• /
• 2006

The purpose of this study is to experimentally analysis the eletrokinetic phenomena and remediation characteristics developed during the application of electrokinetic remediation technique to unsaturated soils contaminated by heavy metals. In the laboratory a series of column tests are performed on degree of saturation for shooting range soil. The test results indicated that Pb is mainly removed under unsaturated conditions by electromigration within diffuse double layer, and if the initial containment concentration is below cation exchange capacity and equals to adsorption per unit soil solid weight, the remedial efficiency decreases with the decreasing of transport efficiency due to the changes in the degree of saturation in the electric gradient of 1V/cm.

• Journal of Environmental Science International
• /
• v.8 no.5
• /
• pp.593-600
• /
• 1999

In order to determine the changes of sediment facies and metal levels in surface sediments after the construction of Shiwha Lake, surface sediments were sampled at 8 sites located on the main channel monthly from June, 1995 to August, 1996 and analysed for 12 metals (Al, Fe, Mn, V, Cr, Co, Ni, Cu, Zn, Cd, As and Pb) by ICP/AES and ICP/MS. Two groups of sampling sites(the inner lake with 3 sites and the outer lake with 5 sites) are subdivided by the surface morphology ; the inner lake is a shallow channel area with a gentle slope, while the outer lake is relatively deep and wide channel with a steep slope which has many small distributaries. After the construction of dam, fine terrestrial materials were deposited near the outer lake, which resulted in the change of major sediment facies from sandy silt to mud. With the deposition of fine sediments in the outer lake, anoxic water column induced the formation of sulfide compounds with Cu, Cd, Zn and part of Pb. Metal (Cr, Ni, Cu, Zn and Cd) contents in sediments increased up to twice within 2 years after the construction of dam. This is due to the direct input of industrial and municipal wastes into the lake and the accumulation of metals within the lake. In addition, frequent resuspension of contaminated sediments in a shallow part of the lake may make metal-enriched materials transport near the outer lake with fine terrestrial materials. As the enrichment of Cu, Zn, Cd and part of Pb in the Shiwha Lake may be related to the formation of unstable sulfide compounds by sulfate reduction in anoxic water or sediment column, the effect of mixing with open coastal seawater is discussed.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.733-738
• /
• 2013

Sediment contains a high fraction of organic matter, high buffering capacity, and a large portion of fine grained particles such as silt and clay, which are major barriers to remove heavy metals from sediments. In this study, a lab-scale electrokinetic (EK) technique was applied to remove heavy metals effectively from marine sediment at a constant voltage gradient of 2 V/cm. A concentration of 0.1 M of ethylenediaminetetraacetic acid (EDTA), citric acid (CA), $HNO_3$, and HCl were circulated in the cathode, and tap water was circulated in the anode. CA extracted 92.4% of Ni, 96.1% of Cu, 97.1% of Zn, and 88.1% of Pb from marine sediment. A higher voltage gradient enhanced the transport of citrate and EDTA into the sediment and, therefore, increased metal extraction from the marine sediment through a complexation reaction between metals and the chelates. Based on these results, the electrokinetic process using a high voltage gradient with EDTA and CA might be useful to extract heavy metals from marine sediment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.29-37
• /
• 2006

In remediation of the contaminated soil, it requires to select at least more than two remediation technologies depending on the fate and transport phenomena through complicated reactions in soil matrix. Therefore, methodologies related to develop the integrated remediation technology were reviewed for agricultural soils contaminated with heavy metals. Pneumatic fracturing is necessary to implement deficiency because soil washing is not effective to remove heavy metals in the subsurface soil. But it needs to evaluate the characteristics such as essential data and factors of designated technology in order to effectively apply them in the site. In the remediation site, the important soil physical and chemical factors to be considered are hydrology, porosity, soil texture and structure, types and concentrations of the contaminants, and fate and its transport properties. However, the integrated technology can be restrictive by advective flux in the area which remediation is highly effective although both soil washing and pneumatic fracturing were applied simultaneously in the site. Therefore, we need to understand flow pathways of the target contaminants in the subsurface soils, that includes kinetic desorption and flux, predictive simulation modeling, and complicated reaction in heterogenous soil.

• 한국해양학회지
• /
• v.26 no.1
• /
• pp.38-46
• /
• 1991

size data of 1,044 surface sediments from Korean shelf area were compiled and reexamined. Size distribution curves of the sediments are unimodal (31% of the total number), bimodal (54%), or multimodal 915%), Size curves of the sediments and modal subpopulations of the mixed sediments show resemblance to normal curve in shape. The modal mean value shows systematic change along a direction inside the Recent mud belts of the southeastern Yellow Sea and west of Korea Strait. It was found that the areas covered by unimodal sand are minimal value areas of heavy metal and suspended sediment-concentration in the southeastern Yellow Sea and northern East China transport processes during Recent time. It was also found that the mode analysis is useful method to extract information from sediment size data.

• Analytical Science and Technology
• /
• v.9 no.2
• /
• pp.134-138
• /
• 1996

Cadmium was transported through the special carrier system into the cells of cotyledons, hypocotyls, and roots spring radish young plants. The transport of cadmium was inhibited by metabolic inhibitor, like DNP. The $K_m$ values for cadmium were 0.7 ppm for cotyledons, 1.72 ppm for hypocotyls, and 0.3 ppm for roots, and $V_{max}$ for cadmium was $40ppm{\cdot}h^{-1}{\cdot}g{\cdot}fresh\;weight^{-1}$ for cotyledons, $313ppm{\cdot}h^{-1}{\cdot}g{\cdot}fresh\;weight^{-1}$ for hypocotyls, and $606ppm{\cdot}h^{-1}{\cdot}g{\cdot}fresh\;weight^{-1}$ for roots. Cadmium cannot prove to be inducer for proline accumulation. Therefore, proline accumulation cannot be used as a marker to test the level of heavy metal pollution.