• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.3
• /
• pp.191-198
• /
• 2014

Absorption and accumulation of heavy metals in plants were determined by phytoavailable contents rather than total contents of heavy metals. Therefore, phytoavailability-based management protocol should be prepared for safe food crop production in contaminated agricultural lands. This study was conducted to understand the distribution and phytoavailability of heavy metal in the Korean agricultural soils affected by abandoned mining sites along with investigation of soil properties (soil pH, OM, DOC, clay content, Al/Fe/Mn content) influencing on the metal phytoavailability. For this, 142 agricultural soils located nearby 39 abandoned mining sites distributed in five province in Korea, were analyzed. Among the four different heavy metals, cadmium (Cd) and zinc (Zn) appeared to exist in more phytoavailable form than cupper (Cu) and lead (Pb). Soil pH was the main factor governing phytoavailable Cd, Pb, and Zn showing positive relationship with partitioning coefficients of the corresponding metals; Cd (r = 0.66, P < 0.001), Pb (r = 0.70, P < 0.001), and Zn (r = 0.62, P < 0.001). This implied higher phytoavailability of the corresponding metals with higher soil pH. In contrast, phytoavailability of Cu (r = 0.41, p < 0.01) was only negatively related with soil DOC (dissolved organic carbon).

• Economic and Environmental Geology
• /
• v.33 no.2
• /
• pp.91-100
• /
• 2000

It has been more than ten years since Dukun mine was abandoned. Tailings of waste deposits and slime dumps in the abandoned Dukum mine have been left to be deserted for fifty years. The results of fifty years of neglecting are nothing short of major environmental problems. Slime dumps have been exposed to air and water in the mine over ten years and then soil profile has been formed well. Soil in the upper layer (A horizon) is the light gray color due to the leaching of cations. Soil in the lower layer (A2 horizon, 0.2∼0.3m)is tinted with reddish brown and yellowish brown color due to the development of iron oxides and iron hydroxides. Soil in the lower part of B horizon of (1.0∼3.0m) with the growth of copper and zinc oxides exposes to the bluish green, light blue, and dark gray. Ranging from 3m to 8m in depth, 85 samples were taken from 22 sampling sites with 50m intervals located on the slime dump area with hand auger and trench (open cut). As tailings was distributed, heavy metal elements extracted by the process of surface water and ground water move and disperse in to the hydrosphere. Waste dumps were distributed in and around the mine and water draining from those dumps be a potential source of contamination. Soils, thus, can be dispersed into downslope and downstream through wind and water by clastic movement. These materials may be deposited in another horizon if the water is withdrawn, or if the materials are precipitated as a result of differences in pH, or other conditions in deeper horizons. These were primarily associated with acid mine drainage. The characteristics and rate of release of acid mine drainage are influenced by various chemical and biological reactions at the source of acid generations. Prolonged extration of heavy metal elements has a detrimental effect on the agricultural land and residental area. Twenty soil samples were collected from the agricultural land in the area (0∼30 cm). Seventeen samples were also taken from the sediment in the stream running alongside the dumps. The dispersion patterns of heavy metal elements are as follows: The content of As ranged 2∼6 ppm in a horizon, 20∼125 ppm in B horizon with large amount of clay mineral is concentrated and the content of Cd ranged 1∼2 ppm in A horizon, 4∼22 ppm in B horizon. Like Cd, the content of As, Cu, Zn, Pb in B horizon is higher than that in A horizon (approximately 5∼100 times). When soil formation proceeds in stages, it is necessary to investicate the B horizon with the concentration of heavy metal and preventive measures will have to established.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.29-37
• /
• 2007

To evaluate the effect of carbonization temperature of charcoal on the heavy metal adsorption property, Quercus mongolica wood and Larix kaempferi bark powder (100~60 mesh) were carbonized at between 400 and $900^{\circ}C$ at intervals of $100^{\circ}C$. In the properties of carbonized materials which affect the adsorption ability, pH increased with increasing the carbonization temperature, so that the pHs of wood and bark charcoal carbonized at $900^{\circ}C$ were 10.8 and 10.4, respectively. Also, in both materials, the carbon content ratio became larger as the carbonization temperature was raised. At the same carbonization temperature, carbon content ratio of the bark charcoal tended to be greater than that of the wood charcoal. In case of iodine adsorption which indicates the adsorption property in liquid phase, the wood charcoal showed higher adsorption value than the bark charcoal. From the investigation of adsorptive elimination properties of the charcoals against 15 ppm Cd, Zn, and Cu, the higher the carbonization temperature, the greater elimination ratio was. In comparison, the wood charcoal presented higher elimination ratio than that of the bark charcoal. In the wood charcoals carbonized at higher than $500^{\circ}C$, especially, 0.2 g of the charcoal was enough to eliminated almost 100% of the heavy metal ions. Heavy metal ion elimination ratio of the charcoals depended on the kinds of adsorbates. The effectiveness of adsorbates in adsorptive elimination by the charcoals were in order of Cu > Cd > Zn. This is because the physicochemical interaction between the adsorbate and adsorbent affects their adsorption properties, it is considered that subsequent researches are needed to improve the effectiveness of heavy metal adsorption by the charcoals.

• Journal of Environmental Health Sciences
• /
• v.37 no.5
• /
• pp.348-357
• /
• 2011

Objectives: This study was conducted in order to examine the relationship between heavy metal concentrations in the soil and the level of heavy metals in the blood or urine of 216 local residents living near abandoned metal mines. Methods: Residents around abandoned metal mines were interviewed about their dietary habits, including seafood consumption, medical history, cigarette smoking, and drug history. Metal concentrations in the soil were determined by atomic absorption spectrophotometer (AA-7000, Shimadzu, Japan). Lead (Pb) and cadmium (Cd) contents in the blood or urine were analyzed by GF-AAS (AA-6800, Shimadzu). Mercury (Hg) contents in the blood were determined by means of a mercury analyzer (SP-3DS, NIC). Arsenic (As) content in the soil and urine were measured by a HG-AAS (hydride vapor generation-atomic absorption spectrophotometer). Results: The heavy metal concentrations in the soil showed a log normal distribution and the geometric means of the four villages were 8.61 mg/kg for Pb, 0.19 mg/kg for Cd, 1.81 mg/kg for As and 0.035 mg/kg for Hg. The heavy metal levels of the 216 local residents showed a regular distribution for Pb, Cd, Hg in the blood and As in the urine. The arithmetic means were 3.37 ${\mu}g$/dl for Pb, 3.07 ${\mu}g$/l for Cd and 2.32 ${\mu}g$/l for Hg, 10.41 ${\mu}g$/l for As, respectively. Conclusions: As a result of multi-variate analysis for the affecting factors on the bodily heavy metal concentrations, gender and concentration in the soil (each, p<0.01) for blood lead levels; gender and smoking status (each, p<0.01) for blood cadmium levels; gender (p<0.01) for urine arsenic levels; gender, age and concentration in the soil (p<0.01) for blood mercury levels were shown to be the affecting factors.

• Journal of Environmental Health Sciences
• /
• v.18 no.2
• /
• pp.106-116
• /
• 1992

In order to examine the influences of diluent, DVB, and ligand content, in the adsorption velocities and capacities of chelating resins to heaw metal ions, the chelating resins containing the PO$_3$H, amide, and PO$_3$H+amide were prepared from AN-STR-DVB copolymer. The adsorption capacities of chelating resins were measured by ICP-AES. The major results of the studies are as follows: The optimized compositions of the chelating resins having the highest adsorptivity for the heavy metal ions were found to be DVB=7 wt%, toluene= 100 vol%. The adsorption rate of the chelating resins to the heaw metal ions was PO$_3$H > PO$_3$H+Amide > Amide in order.

• Journal of Soil and Groundwater Environment
• /
• v.23 no.3
• /
• pp.27-42
• /
• 2018

It is important to identify the contaminant sources and to evaluate the fate and transport of heavy metals to crops in agricultural lands. This study was conducted to evaluate metal sources and its transfer and accumulation to crop in agricultural soils. Pollution indices were calculated and multivariate analysis was performed to identify metal sources. To evaluate transfer and accumulation of metals to crops, the contents of phytoavailable metals were evaluated by using single extraction method and the correlation between metal content and soil properties was analyzed. Also the BCF was quantitatively evaluated for investigating the metal transition to each crop grown in the research area. As a result, Cr, Ni, and Co were expected to be mainly derived from geologic factors due to weathering of certain parent rocks. The content of nickel in soils of the research area was slightly higher than that of the concern level criteria based on total concentration, but the amount transferred and accumulated in the crops was actually low. Understanding the contamination characteristics by investigating the pollution sources of heavy metals and its transfer and accumulation to crops through various evaluation techniques could provide important information for proper management of the agricultural land.

• Journal of Environmental Health Sciences
• /
• v.13 no.1
• /
• pp.7-16
• /
• 1987

A study was carried out to determine the adequacy of springs as drinking water in summer and in winter separately. In this study, environmental sanitation, physio-chemical examination, bacteriologic contamination and the content of heavy metal were included. For this study, samples were collected from 8 springs which were located in the suburbs of Chunchon city. The following results were obtained. 1. There was the covering system in 1 out of 8 springs. 6 out of 8 springs showed contaminating source within lorn. 2. In physio-chemical test, six out of 8 springs were found to be unsafe for the legitimate standard of safty water. 3. Bateriologic examination clone during summer showed the evidence of coilform group at 7 out of 8 springs and during winter showed positivity at 3 out of 8 springs. 4. In the study for heavy metal content, all places showed high iron level beyond the standard level of salty water, and 4 places showed high contents of fluorine, mangan and lead.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.57-67
• /
• 1999

Welding is widely applicable and reliable process and is mainly adopted for fabricating heavy structures. Recently, weld metal transverse cracks in butt and fillet weld joint is a serious problem, and they must be eliminated for improving weld joint reliability. The weld metal transverse crack susceptibility of butt and fillet joint was carried out by cantilever type tensile crack testing jig and CTS test. In this view of point, this study investigated the potential factors for weld metal transverse crack. The main results obtained were as follows: 1. The content o fdiffusible hydrogen in weld metal played an important role for weld metal transverse cracks. 2. From cantilever type tensile crack tests, it was pointed out that the higher the diffusible hydrogen content and tensile restraint, the more susceptible to weld metal transverse craking. 3. The TSN(thermal severity number) and diffusible hydrogen were important factors for determining weld metal transverse cracks in fillet weld joints.

• The Korean Journal of Ecology
• /
• v.22 no.3
• /
• pp.139-144
• /
• 1999

In order to clarify ecological survival strategy of Rumex crispus community dominating under contaminated area of lower region of Kumho riverside including Chimsangyo (CS), Paldalgyo (PD), Talseochon (TS) and Kumhogyo (KH), we analyzed the content of heavy metals and inorganic matter and vegetative growth. R. crispus showed rapid formation of community by high growth rate, high T/R ratio and showed maximum T/R ratio at the contaminated area Talseochon. Nitrogen and phosphorus contents in R. crispus showed high value in shoot than that of root. T/R ratio of nitrogen and phosphorus showed 3.1∼3.6 and 1.5∼4.5 for the early growth stage, and 6.7∼17.3 and 3.9∼8.3 for the late one, respectively. The absorbed heavy metals by riot were translocated to shoot, the heavy metal content in shoot higher than those in root of Cu, Zn, Fe, and Pb for 3.6, 1.7, 1.5 and 4.8 times, respectively. Distribution ratio of the heavy metals in each organ showed 61∼85% and 15∼39% for shoot and root, respectively. R. crispus accumulated heavy metals in the order of Fe>Zn>Cu>Pb in shoot, and showed maximum values of Cu, Zn, Fe and Pb for 89.7, 376.6, 2946.1 and 13.2 ㎍/g dw, respectively at Talseochon in April. A physiological and morphological characteristics of R. crispus showed thickened leaf, increased water content above 80% and rapid growth of shoot. R. crispus showed ecological adaptation to the contaminated area by transportation of heavy metals and inorganic matter to shoot, and by accumulation of Ca ion in root.

• Current Research on Agriculture and Life Sciences
• /
• v.11
• /
• pp.111-120
• /
• 1993

We investigated in the existential forms of heavy metals and their distribution in plant and soil surrounding ruined mine in Daduk area. The content of heavy metals in soils was more plentiful in A soil than that in another soil, excepting only Mn. The content of Mn in soils was greater in B soil than those in another soils. The content of each heavy metals, according to existential form, had different patterns on the comparision of each elements ; organic-form on Cd and As, Carbonate-form Cu, Pb and Mn and Residual-form on Fe and Zn. The popularity ration of M. senensis and J. decipiens were about 65% and 72%, respectively, and which means that these plants had resistances to heavy metals. The contents of heavy metals absorbed in root was higher than those of stem except Mn, In M. sinensis, the contents of Zn in root was similar to that of stem. To study the heavy metal contents in water, the highest content of heavy metal, mainly Fe, Mn and Zn, were calculated in extracting water.