• Journal of the Korean Institute of Navigation
• /
• v.23 no.2
• /
• pp.67-79
• /
• 1999

The purpose of this study is to provide basic date on the causes and factors related with the workload on board for Korea Seaman's Low Back Pain. The date had been acquisited through the questionaires of those and analysed in Korea Institute of Maritime and Fisheries Technology from February 10 to April 10 in 1999. The results of this study are as follows: 1. The incidence of Occupational low back pain for the recent 12 months has been recorded as 56.2% of the subject. 2. The highter Occupational satisfaction has the lower incidence of low back pain(p＜0.01). and the person who takes a rest(p＜0.05) and physical exercise regularly(p＜0.01) has lower experience of the incidence. 3. The incidence of low back pain by charateristics of vessel was turn out as 59.3% of the fishing vessel, 55.3% merchantmarine and 52.9% of the vessel of special purpose. The incidence of each department of a ship has recorded as 54.3% of Deck Dept. 59.2% of engine Dept but there was little relationship between those. And the longer period of work and on-board service has the hither incidence of the higher incdence(p＜0.01). 4. The fittness of the working table (p＜0.01) and chair(p＜0.01) has affeced the incidence of low back pain significantly 5. The higher incidence of low back pain has been experienced in case of working: in back posture, and lifting up or carrying a heavy load(p＜0.01) 6. The major cause of low back pain was turned out as excessive workload(26.5%) and stress (18.5%) ; the stress(24.1%) and excessive overwork(22.4%) for Deck dept. and excessive workload(32.3%) and bad position(21.7%) for Engine Dept(P＜0.01)

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.4
• /
• pp.210-220
• /
• 2002

We analysised the effect of harmonics on electric machines of substation power system barred on quantitatively measured harmonics and proposed the methods for prevention of harmonics through checking on transformer, rectifier and cable's capacities against harmonics with reference to KEPCO's electricity service standard. In order to analysis harmoninics of silicon rectifier that is power source in DC substation, computer simulations for a substation with TR of high voltage distribution switchboard are performed. Simulation results show that the total harmonic distortion factor becomes smaller for TR primary and receiving points in order rather than silicon rectifier which is harmonic generation source so that the harmonics generated frets each rectifier are outflowed to power supply and high voltage distribution switchboard The result of higher distortion factors of voltage and current for rectifier with 100% load than those with 50 % and 30% indicates that the waveform of voltage and current for the real substation power system at the office-going and the closing hours with heavy loads might be more distorted. As proposed methods for harmonic reduction, the conventional 6 pulse-type for substation is required to be replaced by 12 pulse-type for reduction of 5th and 7th harmonics. The active filter rather than the passive filter is more effective due to severe variance of rectifier loads, but the high cost is price to be paid. In view of installation area and costs, the use of 12 pulse-type transformer is desirable and then the parallel transformer and the rectifier within the substation must be replaced at the same time. Other substations with parallel feeder can use 6 pulse-type transformer.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.257-262
• /
• 2019

Recently, the number of people enjoying various leisure sports has increased. As a result, the vehicles with various items loaded onto the roof can be easily seen on the street. The device that enables loading on the vehicle roof is called by a rack, and each vehicle has its own different shape. There are various types of roof racks but they must have the strength and durability to load heavy loads. In this study, the structural analysis was performed according to the support method of the roof rack and the shape of the fixture. Of three models, it was shown that model C had the best durability. Therefore, this study result shows which shape of the roof rack is most stable among the models. By utilizing the design data about a convergence study through the structural analysis due to the shape of automotive roof rack obtained on the basis of this result, the esthetic feeling can be shown by being converged onto the part of automobile at actual life.

• Journal of Ecology and Environment
• /
• v.32 no.1
• /
• pp.55-60
• /
• 2009

We analyzed the factors driving succession and the structure, and dynamics of vegetation on sand and gravel bars in order to clarify the differences in vegetation succession in rivers with different river bed substrates. Woody plant communities (dominated by Salix), perennial herb communities (dominated by Miscanthus), and annual plant communities (dominated by Persicaria) appeared in that order from upstream to downstream on the sandbar. The results of DCA ordination based on vegetation data reflected a successional trend. This result suggests that sandbars grow in a downstream direction. Various vegetation types different in successional stage, such as grassland, young stands of Korean red pine (Pinus densiflora), two-layered stands of young and mature pines, and mature pine stands also occurred on gravel bars, but the vegetation in earlier successional stage was established upstream, which is the opposite to the direction found on sandbars. Those results demonstrate that the dynamics of the bed load itself could be a factor affecting vegetation succession in rivers. In fact, sands suspended by running water were transported downstream over the vegetated area of sand bar and thereby created new areas of sandbar on the downstream end of the sandbar. Meanwhile, gravel, which is heavy and thereby is shifted by strong water currents, accumulated on the upstream end of the vegetated area, and thus created new areas of gravel bar in that direction. These results showed that allogenic processes drive vegetation succession on sand and gravel bars in streams and rivers.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.8 s.239
• /
• pp.948-955
• /
• 2005

A three-dimensional computation was conducted to understand effects of the inlet boundary layer thickness on the internal flow in a low-speed axial compressor operating at the design condition($\phi=85\%$) and near stall condition($\phi=65\%$). At the design condition, the flows in the axial compressor show, independent of the inlet boundary layer thickness, similar characteristics such as the pressure distribution, size of the hub comer-stall, tip leakage flow trajectory, limiting streamlines on the blade suction surface, etc. However, as the load is increased, the hub corner-stall grows to make a large separation region at the junction of the hub and suction surface for the inlet condition with thick boundary layers at the hub and casing. Moreover, the tip leakage flow is more vortical than that observed in case of the thin inlet boundary layer and has the critical point where the trajectory of the tip leakage flow is abruptly turned into the downstream. For the inlet condition with thin boundary layers, the hub corner-stall is diminished so it is indistinguishable from the wake. The tip leakage flow leans to the leading edge more than at the design condition but has no critical point. In addition to these, the severe reverse flow, induced by both boundary layer on the blade surface and the tip leakage flow, can be found to act as the blockage of flows near the casing, resulting in heavy loss.

• Korean journal of food and cookery science
• /
• v.25 no.5
• /
• pp.575-585
• /
• 2009

This study was conducted to identify the job stress factors of school foodservice employees and to examine the relationship between job stress and turnover intention through path analysis. Data was collected using a survey of 432 school foodservice employees in elementary and secondary schools in Masan, Kyungsangnam-do. All of the participants were female, and 165(52.9%) were over the age of 45' Additionally, 310(99.4%) of the respondents were married, while 287(92.0%) had less than a high school level of education. Furthermore, 271(86.9%) of the respondents were cooks. Overall, 107(34.3%) of the respondents had worked in the food industry for less than $5{\sim}10$ years. In addition, 208 (66.7%) respondents answered that they had 'never' changed jobs. Among job characteristics that causes job stress, job posture was the primary stress factor, followed by heavy work load and job condition. Job stress was found to be significantly correlated with turnover intention. Additionally, job position was the only moderating variable that was found to be correlated with job characteristics and job stress. Finally, the moderating variables influencing the effects of job stress on turnover intention were identified as performance confidence, job career, and job position. The results of this study will be useful for future studies conducted to evaluate the development of job environments and performance to minimize turnover and job inefficiency as a result of job stress.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.1
• /
• pp.31-38
• /
• 2012

Next generation cellular applications and smart phone usage generate very heavy wireless data traffic. It becomes ineluctable for mobile network operators to have multiple core network entities such as Serving Gateway and Packet Data Network Gateway in 4G-LTE to share this high traffic generated. A typical configuration consists of multiple serving gateways behind a load-balancer which would determine which serving gateway would service a end-users'request. Such hardware is expensive, has a rigid policy set, and is a single point of failure. Another perspective of today's increasingly high data traffic is that besides it is being widely accepted that the high bandwidth L TE provides is creating bottlenecks for service providers by the increasing user bandwidth demands without creating any corresponding revenue improvements, a hidden problem that is also passively advancing on the newly emerging 4G-LTE that may need more immediate attention is the network signaling traffic, also known as the control-plane traffic that is generated by the applications developed for smartphones and tablets. With this as starting point, in this paper, we propose a solution, by a new approach considering OpenFlow switch connected to a controller, which gains flexibility in policy, costs less, and has the potential to be more robust to failure with future generations of switches. This also solves the problem of scaling the control-plane traffic that is imperative to preserve revenue and ensure customer satisfaction. Thus, with the proposed architecture with OpenFlow, mobile network operators could manipulate the traffic generated by the control-plane signaling separated from the data-plane, besides also reducing the cost in installing multiple core-network entities.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.1049-1068
• /
• 2011

In this paper a simple and effective call admission control (CAC) scheme is proposed for the emerging interleave-division multiple-access (IDMA) systems, supporting a variety of traffic types and offering different quality of service (QoS) requirements and priority levels. The proposed scheme is signal-to-interference-plus-noise ratio (SINR) evolution based CAC (SE-CAC). The key idea behind the scheme is to take advantage of the SINR evolution technique in the process of making admission decisions, which is developed from the effective chip-by-chip (CBC) multi-user detection (MUD) process in IDMA systems. By virtue of this semi-analytical technique, the MUD efficiency can be estimated accurately. Additionally, the computational complexity can be considerably reduced. These features make the scheme highly suitable for IDMA systems, which can combat intra-cell interference efficiently with simple CBC MUD. Analysis and simulation results show that compared to the traditional CAC scheme considering MUD efficiency as a constant, the proposed SE-CAC scheme can guarantee high power efficiency and throughput for multimedia traffic even in heavy load conditions, illustrating the high efficiency of CBC MUD. Furthermore, based on the SINR evolution, the SE-CAC can make accurate estimation of available resource considering the effect of MUD, leading to low outage probability as well as low blocking and dropping probability.

• Journal of Hydrogen and New Energy
• /
• v.27 no.4
• /
• pp.431-440
• /
• 2016

Electric or hydrogen energy source is expected to solve a various issues including energy security and exhaust pollution. However, it is required a lot of time and a variety of development to apply for commercialization. Therefore, it is needed to translation fuels between the future and the present. DME (Dimethyl Ether) can play a reduce exhaust emission from medium- to heavy-duty engines that are mostly used in commercial sector. It have applied to the DME fuel as a various alternative fuel including power generation in many countries. Especially, it is necessary to secure the energy of energy-poor areas that are widely distributed around the world. And Korea also has the energy-poor areas due to geographical characteristics. These areas has been covered by their own energy through some small diesel generators, diesel boiler etc. If DME fuels are supplied in new demand such as rural sector with energy poor area, DME fuel will be available in the wider sector. In this study, it investigated performance and emission characteristics of agricultural generator and air heater using DME fuel. So the existing equipment of generator and air heater was modified to apply DME fuel. And combustion characteristics and properties of exhaust gas according to the contents of the DME fuel were evaluated. DME fuel showed a potential application in agricultural generator and air heater.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.5983-5991
• /
• 2014

Introduction: Upper aero-digestive tract cancer is a multidimensional problem, international trends showing complex rises and falls in incidence and mortality across the globe, with variation across different cultural and socio-economic groups. This paper seeks some explanations and identifies some research and policy needs. Methodological Approach: The literature illustrates the multifactorial nature of carcinogenesis. At the cellular level, it is viewed as a multistep process involving multiple mutations and selection for cells with progressively increasing capacity for proliferation, survival, invasion, and metastasis. Established and emerging risk factors, in addition to changes in incidence and prevalence of cancers of the upper aero-digestive tract, were identified. Risk Factors: Exposure to tobacco and alcohol, as well as diets inadequate in fresh fruits and vegetables, remain the major risk factors, with persistent infection by particular so-called "high risk" genotypes of human papillomavirus increasingly recognised as also playing an important role in a subset of cases, particularly for the oropharynx. Chronic trauma to oral mucosa from poor restorations and prostheses, in addition to poor oral hygiene with a consequent heavy microbial load in the mouth, are also emerging as significant risk factors. Conclusions: Understanding and quantifying the impact of individual risk factors for these cancers is vital for health decision-making, planning and prevention. National policies and programmes should be designed and implemented to control exposure to environmental risks, by legislation if necessary, and to raise awareness so that people are provided with the information and support they need to adopt healthy lifestyles.