• Title/Summary/Keyword: Heating experiment

Search Result 868, Processing Time 0.028 seconds

Feasibility Evaluation of Co-Incineration with MSW for Efficient Recycling of the Rejects after Separation Processes in MRF (재활용 기반시설에서 발생하는 선별 잔재물의 자원화를 위한 도시생활폐기물과의 혼합소각 가능성 평가)

  • Shin, Taek-Soo;Sung, Baek-Nam;Yeon, Ik-Jun;Cho, Byung-Yeol;Kim, Kwang-Yul
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.33 no.10
    • /
    • pp.767-773
    • /
    • 2011
  • The purpose of this study was to investigate the possibility of an alternative fuel resource by incinerating a mix of combustible MSW (municipal solid waste) and offals after separating recyclable material at the MRF (material recovery facilities) location. We analyzed the physical and chemical properties including the 3-contents, the calorific value, and chemical compositions of the separation rejects in MRF, and compared the results with combustible MSW. Moreover, we experimented the trend of combustible properties and the concentration change of air pollutants at mixed incineration in the MSW incinerator. According to the results of the experiment, the separation rejects showed higher heating value (5,865 kcal/kg), and lower moisture and ash content than combustible MSW. Since we have incinerated MSW in the MSW incinerator mixing the offals at 30% and 50% respectively, we know that the change of the concentration of dust, $SO_2$, $NO_2$, and CO did not appear significant, and not exceed the pollutants emission regulation. But, considering the enhancement of the HCl emission concentration (max. 33.7 ppm) at the co-incineration of the 50% offals, we believe that the proper mixing ratio of the separation rejects would become within 30%.

Studieson Titanium Enamel Frit (티타늄琺瑯후릿트에 關한 硏究)

  • Lee, Chong-Keun;Han, Ki-Sung
    • Journal of the Korean Chemical Society
    • /
    • v.4 no.1
    • /
    • pp.18-26
    • /
    • 1957
  • There are two problems to be solved by our efforts in the enamel frit. One is how we can cover the enamel frit thin with complete milk white as possible, and the other is how it can be, made resistant for chemicals than before one. The frit which can solved the two problems just mentioned above is titanium enamel frit. This frit has been developed in America after War Ⅱ, and now the research for concerning antimony frit into titanium frit is under development entirely. In order to develope the enamel industry in Korea, it is urgent problem to convert antimony frit into titanium frit. By the way the titanium frit is emulsified titanium oxide crystal which made through reheating the supersaturated solution of titanium oxide in the basis of glass. Unfortunately, there are many obscure points in active fact or which influence on its composition and characteristics yet. However, this task was tried for the first in Korea. As first step, the test was carried on the reference books, and we can be possible convert antimony frit into titanium frit as a result of this experiment. As a conclusion, for the purpose of developing the enamel industry in Korea, we studied that the research for converting antimony enamel frit which has been used popularly into titanium enamel frit which is more economic and resistant for chemicals. As a result of experiments, the following points concerning with titanium frit have become clearly. 1. It is better when the composition of titanium enamel frit has as following table.Man Duck San Silica 24 An Yang Feldspar 20 Borax 28 Sodium Nitrate 4 Cryolite 7 Calcium Carbonate 3.6∼1 Titanium Oxide 10 Calcium phosphate 0 ∼3.2 Calcium Fluoride 0∼1.8 Antimony Oxide 0∼0.5 2. The amount of $TiO_2$, to be added is $10%\;to\;12{%,\;CaF_2\;is\;under\;1.8%,\;P_2O_5\;is\;under\;1.6%,\;Sb_2O_3\;is\;under\;0.5%$. 3. In the titanium frit, the limit of iron oxide amount to be included is under 0. 5%. 4. Comparing the titanium enamel frit with antimony enamel frit not only the titanium frit can be savely 20.6% in the price of raw materials, but one time of glazing and heating process is omitted in each case, and it is known the titanium frit is more resistant for chemicals than antimony frit.

  • PDF

Effect of Asterina pectinifera Extracts on the Activation of Immune Cells (별불가사리 추출물의 면역세포 활성화 효과)

  • Chae, Su-Yeon;Kim, Mi-Jung;Kim, Do-Soon;Park, Jung-Eun;Jo, Sung-Kee;Yee, Sung-Tae
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.36 no.3
    • /
    • pp.269-275
    • /
    • 2007
  • In this experiment, the effects of Asterina pectinifera extracts on the activation of immune cells were studied. An immune cell activating factor was partially purified from starfish, Asterina pectinifera, by means of physiological saline extraction, acetone precipitation and heating inactivation. Starfish extracts increased the proliferation of spleen cells and induced the production of IL-6 and $IFN-{\gamma}$ by spleen cells. Also, it increased the proliferation of purified B cells and production of IgM and IgG in the presence of Asterina pectinifera extracts. Starfish extract self-induced NO synthesis in mouse macrophage cell line (RAW264.7). When cell lines was treated with extracts, the mRNA expression of inducible NO synthetase (iNOS), $TNF-{\alpha}$, IL-6, and GM-CSF were markedly increased in RT-PCR analysis. Therefore starfish extract can self-activate spleen cells, B cells and macrophages. These results might be useful in further studies into a possible immune activating agent from the starfish, Asterina pectinifera, for the development of functional foods and drugs.

Thick Film Gas Sensor Based on PCB by Using Nano Particles (나노 입자를 이용한 PCB 기반 후막 가스 센서)

  • Park, Sung-Ho;Lee, Chung-Il;Song, Soon-Ho;Kim, Yong-Jun
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.14 no.2 s.43
    • /
    • pp.59-63
    • /
    • 2007
  • This paper presented a low-cost thick film gas sensor module, which was based on simple PCB (Printed Circuit Board) process. The proposed sensor module included a $NO_2/H_2$ gas sensor, a relative humidity sensor, and a heating element. The $NO_2/H_2$ gas and relative humidity sensors were realized by screen-printing $SnO_2,\;BaTiO_3$ nano-powders on IDTS (Interdigital Transducer) of a PCB substrate, respectively. At first 1% $H_2$ gas flowed into the sensor chamber. After 4 min, air filled the chamber while $H_2$ gas flow stopped. This experiment was performed repeatedly. The Identical procedure was used for the $NO_2$ detection. The result for sensing $H_2$ gas showed the increase of voltage from 0.8V to 3.5V due to the conductance increase and its reaction response time by hydrogen flow was 65 sec. $NO_2$ sensing results showed 2.7 V voltage drop due to the conductance decrease and its response time was 3 sec through a voltage monitoring.

  • PDF

Characteristic of Pork Quality during Storage Fed with Ginseng By-Products (인삼부산물 급여 수준에 따른 돈육의 저장특성)

  • 유영모;안종남;채현석;박범영;김진형;이종문;김용곤;박형기
    • Food Science of Animal Resources
    • /
    • v.24 no.1
    • /
    • pp.37-43
    • /
    • 2004
  • The "Ginseng Pork" produced by feeding ginseng by-products can be a compatible product in the sense of increasing pork consumption and developing functional food in the international pork market. This experiment was conducted to produce "Ginseng Pork" with emphasis on growth performance and meat quality. Experiments were conducted in which 30 Landrace heads were fed with bark of ginseng root(BGR) or heating extracts ginseng leaves and stem(HEG). WB-shear force was not different among the treatment groups until 15 days of ageing, but pork fed with the 6% BGR showed a higher shear force at 20 day of storage at 4$^{\circ}C$. Cooking loss showed lower value for the 9% BGR group compared with the control group. At 15 day, the 3% and 9% BGR groups showed lower cooking losses than control. Pork groups fed HEG showed a significantly(p<0.05) lower TBARS values after 5 days of storage. As for VBN analysis, the feeding groups of 9% BGR and 5.5% HEG had significantly lower values at 5 and 20 days when compared to the other treatment groups. It might be concluded that the accumulation of ginseng saponin in the pork resulted in retarding the ageing and inhibiting the oxidation.

Experimental Studies on the Optimum Pasteurization Condition of the Cow's Milk Produced in Korea II. The Changes in Chemical Composition and Microbiological Aspects of Low Temperature Pasteurized Milk (한국산(韓國産) 우유(牛乳)의 적정(適正) 살균조건(殺菌條件)에 관(關)한 실험적(實驗的) 연구(硏究) II. 저온살균처리(低溫殺菌處理)에 의한 우유(牛乳)의 화학적(化學的) 조성(組成) 및 미생물학적(微生物學的) 성상(性狀)의 변화(變化))

  • Kim, Jong Woo
    • Korean Journal of Agricultural Science
    • /
    • v.14 no.2
    • /
    • pp.301-308
    • /
    • 1987
  • The results of experiment to find out the optimum pasteurization condition by heating from $50^{\circ}C$ to $70^{\circ}C$ at intervals of $5^{\circ}C$ and to review chemical composition, microbiological aspects and keeping quality were summarized as follows: 1. The milk sample pasteurized at $50-70^{\circ}C$ showed the decreased pH value from 6.55 to 6.42 while the contents of protein, fat, lactose and ash did not have significant changes. 2. Non-casein nitrogen and filterable nitrogen decreased while casein nitrogen and non protein nitrogen increased as the heat treatment increased. 3. The content of calcium and vitamin C decreased and artificial digestibility for the pasteruized milk increased from 14.07% to 20.00% by the heat treatment. 4. Milk pasteurized at $65^{\circ}C$ had viable bacteria counts $1.3{\times}10^4/m{\ell}$, coliforms negative, psychrotrophic bacteria $9.5{\times}10^2/m{\ell}$ and 99.0% pasteurization effect. 5. Milk pasteurized at $65^{\circ}C$ did not show significant changes in chemical composition and microbiological aspects at $4^{\circ}C$ in refrigerator.

  • PDF

Thermal property of geopolymer on fly ash-blast furnace slag system with the addition of alumina aggregate (알루미나 골재 첨가에 따른 플라이애쉬-고로슬래그계 지오폴리머의 열적특성)

  • Kim, Jin-Ho;Nam, In-Tak;Park, Hyun;Kim, Kyung-Nam
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.27 no.1
    • /
    • pp.47-56
    • /
    • 2017
  • In this study, the higher temperature thermal property of the fly ash-blast furnace slag system Geopolymer including alumina aggregate was investigated whether that Geopolymer will be or not useful as thermal-resistant construction materials. Under every mixing conditions, the crack on the surface of hardened body was not observed up to $800^{\circ}C$ and it corresponded with fact that level of changes was not significant before and after heating process. Residual compressive strength is most high when mixing Blast-Furnace Slag ratio is 60 wt% until temperature reaches $800^{\circ}C$. The major hydrates of hardened body of Geopolymer; amorphous halo pattern between $20{\sim}35^{\circ}$ (2theta) and mullite ($3Al_2O_3{\cdot}2SiO_2$) and quartz ($SiO_2$) was found during the experiment. Amorphous halo pattern was a aluminosilicate gel generated by geopolymeric polycondensation and it was found that the halo pattern of aluminosilicate gel was preserved up to $800^{\circ}C$. The patterns of aluminosilicate gel disappeared from $1,000^{\circ}C$ and crystal phases like gehlenite, calcium silicate, calcium aluminum oxide, microcline was observed with the increase of exposure temperature.

Evaluation of Properties of 80, 130, 180 MPa High Strength Concrete at High Temperature with Heating and Loading (고온가열 및 하중재하에 따른 80, 130, 180 MPa 초고강도콘크리트의 역학적특성평가)

  • Choe, Gyeong-Cheol;Yoon, Min-Ho;Lee, Tae-Gyu;Lee, Seong-Hun;Kim, Gyu-Yong
    • Journal of the Korea Concrete Institute
    • /
    • v.25 no.6
    • /
    • pp.613-620
    • /
    • 2013
  • Concrete has been recognized as a material which is resistant to high temperatures, but chemicophysical property of concrete is changed by the high temperature. So, mechanical properties of concrete may be reduced. Because of this, standards and researches on the degradation of the mechanical properties of concrete at high temperatures have been presented. However, research data about the state that considering the loading condition and high-strength concrete is not much. Therefore, this study evaluated the high-temperature properties of high-strength concrete by loading condition and elevated temperature. The stress-strain, strain at peak stress, compressive strength, elastic modulus, thermal strain and the transient creep are evaluated under the non-loading and $0.25f_{cu}$ loading conditions on high strength concrete of W/B 12.5%, 14.5% and 20%. Result of the experiment, decrease in compressive strength due to high temperature becomes larger as the compressive strength increases, and residual rate of elastic modulus and compressive strength is high by the shrinkage caused by loading and thermal expansion due to high temperature are offset from each other, at a temperature above $500^{\circ}C$.

Effect of Bambusae caulis in Liquamen on Streptozocin-Induced Diabetic C57BL/6 Mice

  • Deung Young-Kun;Park Seung-Kyu;Jin Dan;Yang Eun-Ju;Lim Soo-Jung;Kwon Ki-Rok;Kim Dong-Heui;Lee Kyu-Jae
    • Biomedical Science Letters
    • /
    • v.11 no.3
    • /
    • pp.343-347
    • /
    • 2005
  • Bambusae caulis in Liquamen is one of the important herbal medicine produced by heating bamboo indirectly and is used for treatment of stroke, hypertension, and diabetes etc. Recently the mechanism of clinical effects on Bambusae caulis in Liquamen has been studied. This experiment was conducted to confirm the clinical effects of Bambusae caulis in Liquamen on type 1 diabetes and its related mechanism. We divided C57BL/6 mice into 3 groups and induced them to be type 1 diabetes by injection of streptozocin into peritoneum. The dosage of each group was 150 mg/kg once only, 140 mg/kg once only and 40 mg/kg for 5 days respectively. The two groups injected streptozocin for once took orally Bambusae caulis in Liquamen after the induction of diabetes, and the other one group was given Bambusae caulis in Liquamen during the diabetes inducing period. As the result, the two diabetes-induced groups showed blood glucose decreasing effect by Bambusae caulis in Liquamen on an average, but they didn't show the signiftcant differences statistically. But Bambusae caulis in Liquamen showed the anti-diabetic effect suppressing blood sugar rising trend during the diabetes inducing peried (P<0.05). The anti-oxidative effect of Bambusae caulis in Liquamen was measured with the hypoxanthine/xanthine oxidase (HX/XOD) system. The quantity of ROS was measured using DCFDA reagent indirectly. As the result, $10\%$ solution of Bambusae caulis in Liquamen showed anti-oxidative effect by scavenging $93.4\%$ superoxide as compared with control group. It is suspected that the anti-oxidative effect of Bambusae caulis in Liquamen suppressed the increase of blood glucose in the diabetes-inducing group. These results could be useful data to understand the effect of Bambusae caulis in Liquamen on type 1 diabetes and type 1 diabetes developing because ROS were closely connected with the induction and complications of diabetes.

  • PDF

Comparative Study on Energy Consumption in Steam-Humidification- and Water-Spray-Humidification-Type Outdoor Air-Conditioning Systems for Semiconductor Manufacturing Clean Rooms (반도체 클린룸용 증기가습 및 수분무가습 외기공조시스템의 에너지소비량 비교연구)

  • Kim, Hyung-Tae;Song, Gen-Soo;Kim, Ki-Cheol;Yoo, Kyung-Hoon;Son, Seung-Woo;Shin, Dae-Kun;Park, Dug-Jun;Kwon, Oh-Myung
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.35 no.12
    • /
    • pp.1249-1255
    • /
    • 2011
  • In modern large-scale semiconductor manufacturing clean rooms, the energy consumed by the outdoor air-conditioning system during heating, humidification, cooling, and dehumidification of the incoming outdoor air represents about 45% of the total air-conditioning load required to maintain a clean-room environment. In particular, the energy required for humidification of the outdoor air in winter is very high. Therefore, evaluation and comparison of the energy consumption in key humidification systems, viz., steam-humidification and water-spray-humidification systems, used in outdoor air-conditioning systems would be useful to reduce the outdoor air-conditioning load in clean rooms. In the present study, an experiment with an outdoor air flow of 1000 $m^3$/h was conducted to compare the air-conditioning process and energy consumption in outdoor air-conditioning systems with electrodeboiler steam humidifiers and air-washer water spray humidification systems. The experimental results showed that the water-spray-humidification-type outdoor air-conditioning system consumed less electrical power than did the steam-humidification-type system and was more energy efficient during winter.