• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.416-422
• /
• 2007

The application analysis of bubble pump on the domestic solar water heater system is presented. The system investigated in this study is a passive device, self pumping and self regulating. It was test to use the bubble pump on solar water heater system. The test experiment has been taken on the existed vacuum tube about the efficiency, working fluid temperature and pressure and circulated power. In order to check the working temperature and working pressure effectively, the bubble pump was test separated from the solar water heater. The equipment consists of the bubble pump, heater and heat exchanger. The main structure of bubble pump was design depend on the character of two phase flow. The complete system was instrumented to measure pressures, temperatures and their relationship with the solar radiation intensity. The theory analysis of design bubble pump has been given and the experiment result analysis has been included in the paper.

• 조명전기설비학회논문지
• /
• 제22권11호
• /
• pp.23-29
• /
• 2008

This paper presents a new conceptual electromagnetic induction eddy current based stainless steel plate spiral type heater for heat exchanger or dual packs heater in hot water system boiler steamer and super heated steamer, which is more suitable and acceptable for new generation consumer power applications. In addition, an active clamping quasi-resonant PWM high frequency inverter using trench gate IGBTs power module can operate under a principle of zero voltage soft commutation with PWM is developed and demonstrated for a high efficient induction heated hot water system and boiler in the consumer power applications. This consumer induction heater power appliance using active clamping soft switching PWM high frequency inverter is evaluated and discussed on the basis of experimental results.

• 전기학회논문지P
• /
• 제61권2호
• /
• pp.59-66
• /
• 2012

Recently, the market of Electric Vehicle(EV) is increasing more and more than before. Thus a new heater for the EV is required. The PTC devices may be used the heater for the EV. In this paper, a simple DC-DC Converter is proposed as the PTC Heater for the EV. The proposed circuit was optimally desired to decrease the stress of the power devices and reduce the current ripples. To apply the result of the test in the laboratory to the actual EV system with the high DC voltage, ripple current, average current and output peak current are predicted by using the least-squares method. Finally, the proposed circuit is validated by various experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2310-2312
• /
• 2004

In Korea Electric Power Corporation (or KEPCO), several Demand-Side Management (or DSM) program have been carried out to effectively meet electric power demand at least costs by modifying customers electricity use patterns. As one of them, KEPCO applies low-priced night thermal-storage power service for heat appliances to facilitate efficient use of power facilities by shifting relatively high daytime demands to night hours to build loads during the off-peak periods. In the market of heat-storage type water-heater, electric water-heater has been mostly used, but it has low energy efficiency and needs high capacity electric equipments. So in order to replace these electric water heaters, 15 HP air-source heat pump water heater is developed in Korea Electric Research Institute (or KEPRI). This paper shows that measurement system for performance testing of heat pump water heater is established and heating capacity and performance is analyzed and measured for out-door environmental change.

• 조명전기설비학회논문지
• /
• 제26권3호
• /
• pp.24-30
• /
• 2012

A proposed the electrical fan heater using induction heating is innovative system which applied IH(Induction Heating) magnetic induction heating generated from induction-heated metallic package and high-frequency power circuit technique for thermal converse technique. In this occurs not burning, so that the working environment and deterioration of products can be improved. The existing heater that low efficiency by heated resistance or using fossil fuel of coal, diesel, kerosene has problems about burden for high cost price. In this paper are compared efficiency the existing heaters and designed electrical fan heaters using 3[kW]-Class full-bridge resonant inverter. In addition, action analysis and application of system are discussed.

• 대한기계학회논문집B
• /
• 제33권8호
• /
• pp.565-572
• /
• 2009

In this research, a heater using eddy current for generator is designed and some analysis is performed to validate the system. FEM (finite element method) is used for analysing eddy current phenomena at the various speed of rotor with permanent magnet. A real heater system is fabricated. Some experiment is also performed to validate the analysis result. Through the experiment, the FE analysis is validated and we found that the efficiency of developed heater is over 94%.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.107-111
• /
• 2011

This carbon nano heating system was consisted of power supply equipment, a carbon fiber and a stainless flexible hose. carbon nano heating system was manufactured by carbon fiber of a power capacity 30kw/h and light-oil hot air heater in control plot was the heating capacity 30,000kcal/h, As the result, Temperature difference due to carbon nano heating system and hot air heater in greenhouse showed that air temperature at experimental greenhouse, comparison greenhouse were $14.8^{\circ}C$, $13.4^{\circ}C$ respectively. It was found that carbon nano heating system and light-oil hot air heater heating cost were 1,095,740won, 2,683,628won. therefore as heating cost saving 60%. Yield of tomatoes cultured in greenhouse using carbon nano heating pipe was 4% inclease. Economic analysis comparison between the carbon nano heating pipe and the hot air heater in greenhouse were 41% respectively.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.2628-2634
• /
• 2014

동절기에 차량 전면유리의 결빙이나 이물질을 제거하기 위하여 워셔액 가열시스템 적용이 점차 늘어나고 있다. 이 워셔액 가열 시스템은 짧은 시간동안 목표온도까지 워셔액이 가열되도록 설계되어야 한다. 본 연구에서는 급속하게 워셔액을 가열하기 위하여 차량 워셔액 가열 시스템의 내부 부품의 재질에 따라 열전달 특성을 해석하였다. 해석을 위해 열유동 전산해석에서 사용하고 있는 CFD(Computational Fluid Dynamics) 상용코드인 ANSYS-FLUENT 소프트웨어를 이용하였다. 본 모델은 3차원 비정상상태의 축대칭 모델로 Fluent에서 제공하는 압력기반(Pressure-Based) 기법 중의 하나인 Coupled 기법을 적용하였다. 이 결과를 통하여 충전재 및 유로의 최적화된 재질을 찾게 되었다. 충전재 재질은 낮은 밀도를 가진 공기가 실리콘카바이드보다 빠르게 가열되었다. 유로재질은 니켈보다 열전달계수가 약 4배 정도 큰 구리가 내부에 열을 균일하게 전달되어 메탄올의 가열 시간을 단축하여 효율이 더 높게 나왔다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.15-16
• /
• 2006

LNGC 에 Gas Air Heater를 적용함에 따라 Market 경쟁력 확보 및 System의 효율 개선을 통한 DSME 만의 독창력 확보.

• 항공우주시스템공학회지
• /
• 제14권6호
• /
• pp.10-17
• /
• 2020

The Korean medical evacuation helicopter was developed based on the Korean Utility Helicopter (hereafter referred to as 'Surion'). It uses an auxiliary power unit and engine for heating during winter operation. The helicopter maintains the internal temperature of the aircraft using its bleed air to satisfy its operational capability. However, due to the air inflow through the gap between the aircraft skin and door, additional heating for operating the portable medical equipment and preventing hypothermia in evacuated patients is required. Accordingly, an electric auxiliary heater was developed for additional heating during winter operation, and environmental, durability, and performance tests were conducted per MIL-STD-810G and MIL-STD-461F. The auxiliary heater was verified per the tailored airworthiness certification criteria.