• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.33-36
• /
• 2010

$MgF_2$ is a current material used for optical applications in the ultraviolet and deep ultraviolet range. Process variables for manufacturing $MgF_2$ thin film were established in order to clarify the optimum conditions for the growth of the thin film, dependant upon the process conditions, and then by changing a number of the vapor deposition conditions, substrate temperatures, and heat treatment conditions, the structural and optical characteristics were measured. Then, optimum process variables were thus derived. Nevertheless, modern applications still require improvement in the optical and structural quality of the deposited layers. In the present work, in order to understand the composition and microstructure of $MgF_2$, single layers grown on a slide glass substrate using an Electron beam Evaporator (KV-660), were analyzed and compared. The surface substrate temperature, having an effect on the quality of the thin film, was changed from $200^{\circ}C$ to $350^{\circ}C$ at intervals of $50^{\circ}C$. The heat treatment temperature, which also has an effect on the thin film, was changed from $200^{\circ}C$ to $400^{\circ}C$ at intervals of $50^{\circ}C$. The physical properties of the thin film were investigated at various fabrication conditions, such as the substrate temperature, the heat treatment temperature, and the heat treatment time, by X-ray diffraction, and field emission-scanning electron microscopy.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.30-37
• /
• 1989

Effect of heat treatment on mechanical properties of an overlay weldment was investigated. Over welding was carried out on the structural C-Mn mild steel substrate to take required test specimens. Shielded metal arc welding process with 13Cr-0.2Ni stick electrode was applied. The heat treatment temperatures and holding times were $450{\circ}C., 550{\circ}C., 650{\circ}C., 750{\circ}C., 850{\circ}C.$ and 0.5hr, 2hr, 10hr, respectively. Mechanical tests and microscopic inspection were also carried out to investigate welds soundness. Test results indicated that carbon migration was dominant near bonded zone. At temperature of around 650.deg. C, carburized layer and decarburized layer were formed remarkably along overlay welds region and C-Mn mild steel region, respectively. The wideth of these layers became wider with increasing heat treatment temperature and/or holding time at the elevated temperature, and this relationship agreed with Larson-Miller parameter. Side bending test results demonstrated that the crack free region of overlay welds could be deduced from the relationship between temperature and holding time.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.2
• /
• pp.101-112
• /
• 1995

A study was made to examine the effects of heat-treatment on the microstructures of Cu-bearing HSLA steels. The details of microstructures were studied by using optical microscopy(OM), transmission electron microscopy(TEM) and hardness test. The as-rolled microstructure of HSLA-A consists of ferrite (${\alpha}$) whereas that of HSLA-B consists of needle-shaped phase. The difference in microstructure can be ascribed to the different amount of Ni, Mn, Mo, Cu which affect the hardenability. The austenite grain size is very small up to $1000^{\circ}C$ owing to the Nb-precipitates. As the austenitizing temperature increases above $1000^{\circ}C$, the austenite grain grows rapidly. There are two hardness peaks in the hardness versus temperature curve, at $500^{\circ}C$ and at $675^{\circ}C$ (HSLA-A), $725^{\circ}C$ (HSLA-B). The peak at $500^{\circ}C$ result from the formation of Cu-precipitates and second hardness peak is created due to the formation of M-A constituents. The hardriess decrease in HSLA-B steel with ageing temperature is small because of the higher amounts of Cu than HSLA-A steel. The fine, round ${\varepsilon}$-Cu precipitates grow with ageing temperature and finally transform into rod shape.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.4
• /
• pp.230-236
• /
• 2023

The current study deals with the effect of cooling rate and temperature for annealing on medium-carbon Cr-Mo alloy steel, especially for cold heading quality wire rod, to derive the optimum micro-structures for plastic deformation. This is to optimize the spheroidization heat treatment conditions for softening the material. Heat treatment was performed under seven different conditions at a temperature between A_c1 and A_c3, mostly within 720℃ to 760℃, and the main variables at this time were temperature, retention time and cooling rate. Microstructure and phase changes were observed for each test condition, and it was confirmed that they were greatly affected by the cooling rate. It was also confirmed that the cooling rate was changed in the range of 0.1℃/min to 5℃/min and affected by phase deformation and spheroidization fraction. The larger the spheroidization fraction, the lower the hardness, which is associated with the increasing connection of ferrite phases.

• Progress in Superconductivity and Cryogenics
• /
• v.26 no.2
• /
• pp.24-30
• /
• 2024

Metal 3D printing is utilized in various industrial fields due to its advantages, such as fewer restrictions on production shape and reduced production time and cost. Existing research on 3D printing metal materials focused on changes in material properties depending on manufacturing conditions and was mainly conducted in a room temperature environment. In order to apply metal 3D printing products to cryogenic applications, research on the properties of materials in cryogenic environments is necessary but still insufficient. In this study, we evaluate the properties of stainless steel (STS) 316L and CuCr1Zr manufactured by Laser Powder Bed Fusion (LPBF) in a cryogenic environment. CuCr1Zr is a precipitation hardening alloy, and changes in material properties were compared by applying various heat treatment conditions. The mechanical properties of materials manufactured using the LBPF method are evaluated through tensile tests at room temperature and cryogenic temperature (77 K), and the thermal properties are evaluated by deriving the thermal conductivity of CuCr1Zr according to various heat treatment conditions. In a cryogenic environment, the mechanical strength of STS 316L and CuCr1Zr increased by about 150% compared to room temperature, and the thermal conductivity of CuCr1Zr after heat treatment increased by about 6 to 10 times compared to before heat treatment at 40 K.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.4
• /
• pp.467-475
• /
• 2007

This study was conducted to examine temperature effects on hydrogen production in anaerobic fermentation. 18 batch reactors were operated at mesophilic ($35^{\circ}C$) and thermophilic conditions ($55^{\circ}C$) to achieve maximum hydrogen production in anaerobic fermentation. Optimum hydrogen production conditions were also investigated at each temperature. Different trends were observed regarding pH effects on hydrogen production. This effect was not significant for mesophilic fermentation ($35^{\circ}C$). In this case, pH may not drop to interfere hydrogen production during the test. However, hydrogen production decreased without pH control for thermophilic condition ($55^{\circ}C$). Effects of heat treatment were observed for both fermentation process. Hydrogen production with heat treatment was higher than hydrogen production without heat treatment for both fermentation processes. The amount of produced hydrogen for each substrate concentration with temperature changes showed that more hydrogen was produced at $35^{\circ}C$ than at $55^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.2
• /
• pp.13-20
• /
• 1986

The effect of heat treatment on the dynamic viscoelasticity of the woods of Picea sitchensis and Paulownia coreana which have been for musical instruments was investigated. The treatment was made in a temperature range of 60-180$^{\circ}C$ for periods of 3 hours to 24 hours. The results obtained are summarized as follows: Moisture absorption decreased with increasing temperature. Dynamic Young's modulus decreased with increasing temperature and hours. Dynamic viscoelasticity decreased with increasing moisture content, but internal friction increased with increasing amount of moisture content.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.1
• /
• pp.11-16
• /
• 1994

Anatase $TiO_2$ particles prepared by experiment were used to study the change of crystal structure by calcination temperature. The results were as follows. Crystallite size of anatase $TiO_2$ particles increased with calcination temperature. The rate of increasing the crystallite size of anatase $TiO_2$ particles was decreased below $700^{\circ}C$ and was markedly increased above $700^{\circ}C$. Unit cell volume of $TiO_2$ was expanded at low temperature and was contracted at high temperature. This result means that the growth of crystallite size was occured in the direction.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.41-48
• /
• 2008

The required energy for the heat treatment of pine log was evaluated in this study. A proper heat treatment of pine log infected by pinewood nematode (Bursaphelenchus xylophilus) can prevent spreading of the infection by pinewood nematode and make the infected pinewood valuable again. The FAO (Food and Agriculture Organization of the United Nations) heat treatment standard for various types of infected wood for which a heat treatment of the core part of the wood is necessary is 30 minutes at $56^{\circ}C$, taking into account the international standards for phytosanitary measures (ISPM No. 15). In this study, the energy consumption during the heat treatment was separated into two kinds of energy, initial energy for heating kiln drier and to reach set point temperature and relative humidity and the required energy supplementing heat loss. The initial required energy per unit time is greater than that during the treatment. The energy consumption per unit time varied little during the heat treatment. As a result, the set point relative humidity with set dry bulb temperature and density of wood dependent on moisture content are very important factors to change energy consumption in the experiment. The heat treatment at higher temperature and higher humidity levels requires more energy consumption but less treatment time. It is expected that a more effective energy program could be planed for the heat treatment of pine log through this study.

• International journal of advanced smart convergence
• /
• v.7 no.2
• /
• pp.38-46
• /
• 2018

This study proceeded an experiment that can increase such physiological properties of heated radish extract. During the extraction of radish, including the byproduct, an increase in antioxidant properties of radish according the heating temperature was performed. Upon the extracts of radish bark and radish green extract(mucheong), the physiological functionalities and antioxidant activity were investigated. As a result, the color of radish ethanol extract in dependence of heating temperature, showed light brown color at low heating temperature and black color from $150^{\circ}C$. The total polyphenol content significantly increased as a result of heat treatment; 6.7 times and 22 times higher than the control at $110^{\circ}C$ and $150^{\circ}C$, respectively. DPPH radical scavenging ability and antioxidant property increased with increasing heating temperature; in comparison to heat-treated radish at $110^{\circ}C$ and $150^{\circ}C$, $IC_{50}$ decreased by 1/22 times. $IC_{50}$ of the control was 23times higher than $150^{\circ}C$ heat treated radish (Control $IC_{50}$:130.305). According to the graph that represents ABTS activity, antioxidant activity increased in dependence of heat treatment likewise to the total polyphenol content and DDPH radical scavenging activity. Upon heat treatment at $150^{\circ}C$, antioxidant activity in consequence of ABTS assay increased 23 times higher than the control.