• 대한기계학회논문집B
• /
• 제26권9호
• /
• pp.1284-1291
• /
• 2002

Combustion instabilities are an important concern associated with lean premixed combustion. Laboratory-scale dump combustor was used to understand the underlying mechanisms causing combustion instabilities. Experiments were conducted at atmospheric pressure and sound level meter was used to track the pressure fluctuations inside the combustor. Instability maps and phase-resolved OH chemiluminescence images were obtained at several conditions to investigate the mechanism of combustion instability and relations between pressure wave and heat release rate. It showed that combustion instability was susceptible to occur at higher value of equivalence ratio (>0.6) as the mean velocity was decreased. Instabilities exhibited a longitudinal mode with a dominant frequency of ∼341.8 Hz, which corresponded to a quarter wave mode of combustor. Heat release and pressure waves were in-phase when instabilities occurred. Rayleigh index distribution gave a hint about the location where the strong coherence of pressure and heat release existed. These results also give an insight to the control scheme of combustion instabilities. Emission test revealed that NOx emissions were affected by not only equivalence ratio but also combustion instability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.273-275
• /
• 2005

Active thermography is being used since several years for remote non-destructive testing. It provides thermal images for remote detection and imaging of damages. Also, it is based on propagation and reflection of thermal waves which are launched from the surface into the inspected component by absorption of modulated radiation. For energy deposition, it use external heat sources (e.g., halogen lamp or convective heating) or internal heat generation (e.g., microwaves, eddy current, or elastic wave). Among the external heat sources, the ultrasound is generally used for energy deposition because of defect selective heating up. The heat source generating a thermal wave is provided by the defect itself due to the attenuation of amplitude modulated ultrasound. A defect causes locally enhanced losses and consequently selective heating up. Therefore amplitude modulation of the injected ultrasonic wave turns a defect into a thermal wave transmitter whose signal is detected at the surface by thermal infrared camera. This way ultrasound thermography(UT) allows for selective defect detection which enhances the probability of defect detection in the presence of complicated intact structures. In this paper the applicability of UT for fast defect detection is described. Examples are presented showing the detection of defects in PCB material. Measurements were performed on various kinds of typical defects in PCB materials (both Cu metal and non-metal epoxy). The obtained thermal image reveals area of defect in row of thick epoxy material and PCB.

• 한국전자통신학회논문지
• /
• 제13권4호
• /
• pp.813-818
• /
• 2018

본 논문에서는 가뭄에 의한 용수, 가뭄에 의한 수질과 폭염에 의한 온열질환에 대한 취약성 평가 항목에 대한 선정 배경을 기술하였고, 선정된 취약성 평가 항목에 대해 취약성 평가 가중치 산정을 수행하였다. 또한 취약성 평가절차에서는 단계적으로 적용되는 계산 방법과 실제 사례를 함께 서술하였다. 취약성 평가 데이터베이스 구축에 대해 분석하고, 이러한 취약성 평가 절차를 적용한 폭염과 가뭄을 위한 기후변화 취약성 평가 시스템을 설계하였다.

• 한국환경과학회지
• /
• 제28권7호
• /
• pp.617-627
• /
• 2019

This study investigated the relationship between heat-related illnesses obtained from healthcare big data and daily maximum temperature observed in seven metropolitan cities in summer during 2013~2015. We found a statistically significant positive correlation (r = 0.4~0.6) between daily maximum temperature and number of the heat-related patients from Pearson's correlation analyses. A time lag effect was not observed. Relative Risk (RR) analysis using the Generalized Additive Model (GAM) showed that the RR of heat-related illness increased with increasing threshold temperature (maximum RR = 1.21). A comparison of the RRs of the seven cities, showed that the values were significantly different by geographical location of the city and had different variations for different threshold temperatures. The RRs for elderly people were clearly higher than those for the all-age group. Especially, a maximum value of 1.83 was calculated at the threshold temperature of $35^{\circ}C$ in Seoul. In addition, relatively higher RRs were found for inland cities (Seoul, Gwangju, Daegu, and Daejeon), which had a high frequency of heat waves. These results demonstrate the significant risk of heat-related illness associated with increasing daily maximum temperature and the difference in adaptation ability to heat wave for each city, which could help improve the heat wave advisory and warning system.

• 산업융합연구
• /
• 제18권6호
• /
• pp.99-105
• /
• 2020

일반적으로 모발에 웨이브를 형성시키기 위해서 시술하는 퍼머넌트 웨이브 중에서도 가장 자연스럽고 탄력있는 웨이브를 얻기 위해서 열을 이용한 시술을 선호한다. 이에 본 연구는 퍼머넌트 웨이브 시술시 사용되는 로드의 열 형성도에 따라서 모발에 미치는 표면적인 모발의 손상도를 주사전자현미경을 활용하여 측정하였다. 로드의 열 형성이 웨이브에 미치는 영향력을 알아보기 위해 열 로드에서 전달되는 온도를 측정하고 웨이브를 시술하여 웨이브 된 둥근 모양의 형태대로 모발을 절단한 후 처치를 하였다. 주사전자현미경 관찰에서 뜨거운 열이 직접적으로 닿은 부분은 모발이 끊어진 것을 확인할 수 있었는데 끊어진 면이 매끄러운 현상을 보였다. 본 연구의 결과로는 퍼머넌트 웨이브시에 사용되는 열 로드는 열 전달이 로드 전체에 고르게 전달되는 특성을 가지고 있는 재질을 활용하고 로드의 구조 또한 중요함을 인식하고 미용 업계에서 활발한 연구가 이뤄져야 할 것으로 사료된다.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.25-26
• /
• 1996

In the standard theory of the large scale structure formation, matter accretes onto high density perturbations via gravitational instability. Collision less dark matter forms caustics around such structures, while collisional baryonic matter forms accretion shocks which then halt and heat the infalling gas. Here we discuss the characteristics. roles, and observational consequences of these accretion shocks.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1678-1680
• /
• 1997

The pulsed power with the high voltage and current can be used to the fields of high speed pulses of energy in different forms such as electric current and voltage, electron beam, ion beam, x-rays, gamma rays, heat, magnetics fields, sound and shock waves. This paper is directed mainly at electrical engineers working on production and practical application of high speed pulsed power with high voltage and current.

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.658-663
• /
• 1998

Ferrite plating enables were grown by ferrite by plating method in solution at low temperature(<10$0^{\circ}C$). This faciltates the fabrication of new ferrite thin film devices using non- heat-resistant materials(plastic, GaAs ect) as substrates. Combining the ferrite plating with sonochemistry, application of power ultrasonic waves to stimulate chemical reactions, the crystallinity and qualities of films were improved. Modifying the reactions cell and plating conditions further improved the film quality.

• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.17-22
• /
• 2008

폭염을 포함한 기후변화에 의한 사망자가 2000년의 경우 15만 명에 달하였으며 외부환경 변화에 대응하는 인간은 자연적인 체온 조절기능이 감소되고 냉난방기에 의한 인공적인 환경조절 의존도가 높아지고 있다. 자연재해로서의 폭염에 대한 대응책으로서 우리나라에서도 2007년부터 폭염지수를 예보하고 이에 따른 폭염경보를 발령하고 있으며 각종 산업현장에서도 이에 대한 대응방안을 마련하고 있다. 그러나 결국 이러한 폭염재해대책은 소극적인 방법으로 시민 개개인에게 최종적인 폭염대응을 책임지게 하고 있는 것이다. 이를 보완하기 위해서 보다 체계적이고 능동적인 폭염 대응 시스템의 구축이 필요한 것으로 사료된다. 본 연구에서는 이러한 폭염의 대응방법으로서 쿨링센터의 체계적인 설치와 운영에 대한 대안을 제시하고자 한다. 특히 쿨링센터가 단순한 대피처로서의 역할이 아니라 폭염재난에 있어서 긴급재난통제소와 같은 역할을 수행하는 것을 제안한다.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.586-590
• /
• 2009

Poisson's ratio, one of elastic constants of elastic solids, has not attracted attention due to its narrow range and difficult measurement. Transverse wave velocity as well as longitudinal wave velocity should be measured for nondestructive measurement of Poisson's ratio. Rigid couplants for transverse wave is one of obstacle for scanning over specimen. In the present work, a novel measurement of Poisson's ratio distribution was applied. Immersion method was employed for the scanning over the specimen. Echo signals of normal beam longitudinal wave were collected, and transverse wave modes generated by mode conversion were identified. From transit time of longitudinal and transverse waves, Poisson's ratio was determined without the information of specimen thickness. Poisson's ratio distribution of the carbon steel weldment was mapped. Heat affected zone of the weldment was clearly distinguished from base and filler metals.