• 제목/요약/키워드: Heat of cure

검색결과 152건 처리시간 0.029초

천연(天然)고무의 Damping Property에 관(關)한 연구(硏究) (A study on the Damping Properties of NR Vulcanizates.)

  • 최재운;백남철
    • Elastomers and Composites
    • /
    • 제20권3호
    • /
    • pp.189-204
    • /
    • 1985
  • The purpose of this study is to examine the dynamic properties, especially the damping and fatigue properites, of NR vulcanizates and to find out the vulcanizate which can be used as damping materials in industry. The results of this study can be summarized as follows: 1. In the ODR test, the S-2 vulcanizate was the fastest one in terms of having reached to optimum cure times($t_{90}$) and, with the same formula, when 50phr of HAF carbon black loaded, the shortest optimum cure times has shown. 2. The S - 2 vulcanizate was the best than the others in the physical properties. In aging properties, however, the E - 1 vulcanizate appeared to be better than the other vulcanizates. 3. The results of the RDS test for the NR vulcanization system under the condition of 0.1% strain amplitude and 1 Hz frequency showed no connection between Tg and the the nature of the crosslinking system, but 50phr loading of HAF carbon black increased Tg. The damping values of vulcanizates in the elastic region showed a strong relations the damping values and the crosslinking system. The S - 2 vulcanizate with higher crosslink density had lower damping values than other vulcanizates, and furthermore, the SH - 2 vulcanizates with 50phr loading of HAF carbon black increased the damping values. 4. The Goodrich Flexometer test showed that the heat buildup for the gum NR vulcanizates was less than for those which contained 50phr of HAF carbon black. In particular, the fatigue life of the vulcanizate with lower damping values appeared to be longer than that of the vulcanizates with higher damping values. In the fatigue test, the increasment of the loading or the temperature, applied to the vulcanizates, appeared to be shorten their fatigue life.

  • PDF

탄화복합재료 함침을 위한 퍼퓨릴알콜/흑연분말 혼합물의 열안정성 (Thermal Stability of Furfuryl Alcohol/Graphite Powder Mixtures for Impregnation of Carbonaceous Composite)

  • 안영석;조동환
    • 한국재료학회지
    • /
    • 제8권4호
    • /
    • pp.299-303
    • /
    • 1998
  • 탄소섬유강화 탄소복합재료를 구성하는 탄소매트릭스 프리커서로서 또는 함침제로서 사용되는 퍼퓨릴알콜의 열안전성과 탄소수율에 $2000^{\circ}C$에서 열처리한 흑연분말과 함침 후 경화시 승온속도가 미치는 영향을 열분석방법을 이용하여 조사하였다. 퍼퓨릴알콜에 30wt%의 흑연분말을 첨가하였을 때와 동시에 승온속도가 분당 $35^{\circ}C$일 때 퍼퓨릴알콜/흑연분말 혼합물은 가장 높은 열안정성을 보여주었으며, 흑연분말을 사용하지 않은 경우보다 $1000^{\circ}C$이상에서의 탄소수율이 10%이상 향상되었다. 이러한 결과는 탄소복합재료의 밀도화에 수반되는 탄화$\longrightarrow$함침$\longrightarrow$경화$\longrightarrow$재탄화 반복공정의 횟수를 줄이는데 다소 기여할 것으로 판단되었다.

  • PDF

광경화성 레진의 성분 변화에 대한 소수성 표면 제작을 위한 공정 조건 (Process Conditions for the Fabrication of Hydrophobic Surfaces with Different Photo-curable Resins)

  • 홍성호;우흥식
    • Tribology and Lubricants
    • /
    • 제36권5호
    • /
    • pp.267-273
    • /
    • 2020
  • This study experimentally investigates hydrophobic surfaces fabricated via additive manufacturing. Additive manufacturing, commonly known as 3D printing, is the process of joining materials to fabricate parts from 3D model data, usually in a layer-upon-layer manner. Digital light processing is used to fabricate hydrophobic surfaces in this study. This method uses photo-curable resins and ultraviolet (UV) sources. Moreover, this technique generally has faster shaping speeds and is advantageous for the fabrication of small components because it enables the fabrication of one layer at a time. Two photo-curable resins with different compositions are used to fabricate micro-patterns of hydrophobic surfaces. The resins are composed of a photo-initiator, monomer, and oligomer. Experiments are conducted to determine suitable process conditions for the fabrication of hydrophobic surfaces depending on the type of resin. The most important factors affecting the process conditions are the UV exposure time and slice thickness. The fabrication capability according to the process conditions is evaluated using the side and top views of the micro-patterns observed using a microscope. The micro-patterns are collapsed and intertwined when the exposure time is short because sufficient light (heat) is not applied to cure the photo-curable resin with a given slice thickness. On the other hand, the micro-patterns are attached to each other when the exposure time is prolonged because the over-curing time can cure the periphery of a given shape. When the slice is thicker, the additional curing area is enlarged in each slice owing to the straightness of UV light, and the slice surface becomes rough.

치통(齒痛)의 처방(處方)에 대한 문헌고찰(文獻考察) (A Study on the Herb Medicine of Toothache)

  • 박용호;유미경;김대수;강문여;이명진;이준헌;최정화
    • 대한한의학방제학회지
    • /
    • 제14권1호
    • /
    • pp.52-73
    • /
    • 2006
  • Objective & Methods: Toothache is occurred frequently in daily life. Nevertheless, medical treatment of the toothache is almost dependent on western cure. So we chose the oriental medicine textbook that were dealing with the internal herb medicine and external treatment. we got this result. Result were as follows : 1. The internal medication of toothache was the most used 15times Chungwesan(淸胃散) and 8times Palmihwan(八味丸). 2. Chungwesan (淸胃散) was used to remove the stomach heat. the intestin stomach heat and the stomach blood heat. etc. 3. The pill and powder form in external treatment was much used. 4. The most many used herb were Asari herba cum Radice(細辛), Cimicifugae Rhizoma( 升麻) and Angelicae dahurcae Radix(白芷), etc. 5. The most herb used for external treatment were the spicy warm and the spicy hot medication.

  • PDF

비닐트리에톡시실란 함량에 따른 습식실리카로 충전된 실리콘 고무의 기계적 및 물리적 물성 (Effect of Vinyltriethoxysilane Content on Mechanical and Physical Properties of Precipitated Silica Reinforced Silicone Rubber)

  • 진성훈;홍진호;김일;윤주호;심상은
    • 폴리머
    • /
    • 제35권4호
    • /
    • pp.342-349
    • /
    • 2011
  • 실리카의 표면 개질제인 vinyltriethoxysilane(VTEOS)의 함량에 따른 실리카로 보강된 실리콘 고무의 기계적 물성 변화 및 내열성, 내유성, 압축 영구줄음률, 반발탄성 및 가교밀도 변화를 연구하였다. 결과로 VTEOS의 함량이 2.0 phr까지 증가함에 따라 경도는 상승하였으나 인장강도 파단신율, 인열강도가 감소하였다. 내열시험에서는 VTEOS의 함량이 증가될수록 경도변화, 인장강도 변화율, 파단신율 변화율이 크게 감소하였다. VTEOS 2.0 phr에서 가장 우수한 내열특성을 나타내었다. 또한 VTEOS의 함량이 증가될수록 실리콘 고무의 내유성이 증진되었으며, VTEOS 미첨가 시보다 경도 하락폭이 크게 낮았으며, 파란신율 변화율은 약 2배 이상 감소하였다. 반발탄성도 VTEOS의 함량이 증가될수록 우수하였으며, 압축 영구줄음률 역시 VTEOS가 증가될수록 감소하였다. 가교실험 결과 VTEOS가 증가될수록 최대 토크값와 가교밀도가 크게 향상되었다.

대변불통에 활용된 식치방 연구 (A Study on Food Cures for Constipations)

  • 홍진임
    • 대한한의학원전학회지
    • /
    • 제31권1호
    • /
    • pp.29-43
    • /
    • 2018
  • Objectives : This paper studies how the people of the past deal with constipation before the introduction of modern medical knowledge. Then, the paper selected some of the methods that use food ingredients with little to no side effects, and studied them to find a basic set of data that can be applied to today's medical practices. Methods : This paper reviewed six literatures: China's Eumsunjungyo, Nonohangeon, and Shiggamboncho, and Chosun's Singnyochanyo, Donguibogam, and Jejungsinpyeon. The food cures related to constipation were studied to discover what ingredients and preparation forms were used, how they were taken, what types of prescriptions existed, and how they were applied. Results : The food cure for constipation included ingredients such as mazi, suzi, sesame, honey, yiyiren, yuliren, xingren, taoren, and rice. These ingredients are known for replenishing the body's fluid and humor and allowing the better flow of qi. Mazi porridge, suma porridge, raw sesame oil, suzhu porridge, and suxing porridge were effective in dealing with the conspitation caused by heat, and jingshen wan, yiyiren porridge, yuliren porridge, yulirenyiyiren porridge, xingren porridge, and taoren porridge were effective in taking care of conspitation caused by qi deficiency. Conclusions : With a constipation caused by heat, it is good to take mazi and spinach regularly which is helpful in cooling down the heat. For senior citizens, constipations occur due to the qi deficiency that leads to the lack of fluid and humor. In this case, suzhu porridge should be taken regularly together with milk and sesame oil in order to replenish the qi. This will tonify the amount of qi and moisten the large intestines, which will be also helpful in tonifying the body itself.

Current and Future Trends of Accelerators and Antidegradants for the Tire Industry

  • Hong, Sung-W.
    • Elastomers and Composites
    • /
    • 제34권2호
    • /
    • pp.156-176
    • /
    • 1999
  • Rubber chemicals such as accelerators, antidegradants, vulcanizing agents, processing agents and retarders are very important to the production and protection of tires and rubber goods. The use of accelerators and antidegradants are evaluated in various tire components. This paper will focus on how to vulcanize tires economically and maintain the physical properties of each tire component without severe degradation due to oxygen, heat and ozone. Also, new non-nitrosoamine accelerators and non-staining antiozonants will be discussed. Lastly, the future requirements of antidegradants and accelerators in the tire industry will be reviewed. Tires have been vulcanized with Sulfenamides as primary accelerators and either Guamdine's or Thiurams as secondary accelerators to achieve proper properties at service conditions. However, interior components such as the carcass can be vulcanized with Thiazoles as a primary accelerator to cure faster than the external components. Using the combination of Sulfenamide with secondary accelerators in a tire tread compound and the combination of a Thiazole and Guanidine in a carcass compound will be presented with performance data. Uniroyal Chemical and another Rubber Chemical Manufacturer have developed, "Tetrabenzyl Thiuram Disulfide," (TBzTD) as a non-Nitrosoamine accelerator, which could replace Nitrosoamine generating Thiurams. This new accelerator has been evaluated in a tread compound as a secondary accelerator. Also, Flexsys has developed N-t-butyl-2-benzothiazole Sulfenamide (TBSI) as a non-Nitrosoamine accelerator which could replace 2-(Morpholinothio) -benzothiazole (MBS), a scorch delayed Sulfendamide accelerator. TBSI has been evaluated in a Natural Rubber (NR) belt skim compound vs. MBS. An optimum low rolling resistant cure system has been developed in a NR tread with Dithiomorpholine (DTDM). Also, future requirements for developing accelerators will be discussed such as the replacement of DTDM and other stable crosslink systems. Antidegradants are divided into two different types for use in tire compounds. Internal tire compounds such as apex, carcass, liner, wire breaker, cushion, base tread and bead compounds are protected by antioxidants against degradation from oxygen and heat due to mechanical shear. The external components such as sidewall, chafer and cap tread com-pounds are protected from ozone by antiozonants and waxes. Various kinds of staining and non-staining antioxidants have been evaluated in a tire carcass compound. Also, various para-phenylene diamine antiozonants have been evaluated in a tire sidewall compound to achieve the improved lifetime of the tire. New non-staining antiozonants such as 2, 4, 6-tris-(N-1, 4-dimethylpentyl-p-phenylene diamine) 1, 3, 5 Trizine (D-37) and un-saturated Acetal (AFS) will be discussed in the tire sidewall to achieve better appearance. The future requirements of antidegradants will be presented to improve tire performance such as durability, better appearance and longer lasting tires.

  • PDF

환원슬래그를 사용한 모르타르의 저온에서의 초기동해 방지에 관한 기초적 실험 (A Fundamental Experiment on Preventing Frost Damage at Early Age of Mortar in Low Temperature using Reduction Slag)

  • 민태범;문영범;김형철;최현국;김재영;이한승
    • 한국건축시공학회지
    • /
    • 제16권1호
    • /
    • pp.1-7
    • /
    • 2016
  • 본 연구에서는 $-5^{\circ}C$이하에서도 가열 양생이 없이 수화 반응시 수화열이 높게 발생되는 환원슬래그를 시멘트 분체와 치환사용 하여 영하의 온도에서도 콘크리트의 자체 발열로 인해 압축강도를 재령 3일 이내 5MPa를 발현시켜 초기동해를 방지시키는 것이 최종 연구의 목적이며 이에 대하여 환원슬래그의 물리적 특성 평가와 열적 특성 평가를 실시한 결과 환원슬래그는 높은 수화열을 발생시키기 때문에 저온에서도 압축강도 발현이 우수함을 알 수 있었다. 이는 환원 슬래그의 성분 중 $C_{12}A_7$$C_3A$에 의해 수화열이 높게 발생됨 저온에서도 압축강도가 발현되는 것으로 나타났다. 하지만 환원슬래그 단독 치환하였을 경우 $SO_3$함량 부족으로 급결이 발생하는 것을 알 수 있었다. 급결을 방지하기 위해서는 석고의 사용이 필수적으로 사용되어야 한다. 따라서 본 연구 결과 환원슬래그와 석고를 3성분계로 사용하였을 경우 저온에서도 재령 3일에서 5MPa 압축강도를 나타나는 것으로 보아 저온에서도 콘크리트의 초기동해를 방지할 수 있을 것으로 판단된다.

구창의 문헌연구 (A literal study on the Gu-Chang)

  • 정한솔;박종훈;육상원;이광규
    • 동의생리병리학회지
    • /
    • 제16권1호
    • /
    • pp.32-44
    • /
    • 2002
  • Gu-Chang is a disorder characterized by recurring ulcers confined to the oral mucosa. Despite much clinical and research attention, the causes remain poorly understood. In this paper, we will compare Gu-Chang with Recurrent Aphthous Stomatitis(RAS) in order to know what is the similiarity between Gu-Chang and RAS. So we will arrange various oriental and western medical literatures which are important. As a result of arrangement of the causes, symptoms and therapys of Gu-Chang, we can conclude through the studies as follows. 1. The etiologies of Gu-chang are following. In the Sthenia syndrome, there are evil heat of external factor, heat of heart and spleen, insomnia, heat of upper warmer, stress and diet, heat of lung and heart, excessive heat of upper warmer, inappropriate food intake, heat conveyance of organ, heat of stomach merdian, moistured heat of spleen and stomach and stasis of liver energy. In the Asthenia syndrome, there are deficiency of stomach energy, deficiency of upper warmer leading to heat, deficiency of middle warmer leading to cold, deficiency of lower warmer leading to heat, deficiency of middle energy, deficiency of blood, decreased fire and deficiency of soil, yin fire of lower warmer, deficiency of heart yin, deficiency of spleen yin and deficiency of qi and blood. 2. In western medicine the causes of RAS is presumed as local, microbial, systemic, nutritional, genetic, immunologic factors. 3. Once Gu-chang is compared with RAS, in the deficiency of yin leading to hyperactivity of fire, deficiency of yin leading to floating of fire and stasis of liver energy, recurring of Gu-chang is similar to RAS. Although recurring of Gu-chang due to tripple warmer of excessive fire has no recurrance, since there are the degree of Pain, site of lesion, dysphagia etc, it is similar to major RAS. It is may be believed that Sthenia Gu-chang is similar to major RAS, shape of recurring, site of lesion, degrree of Pain and white color of Asthenia Gu-chang are similar to minor RAS, but there is no similarity concerning herpes RAS in the literatures that describe the symptoms. 4. Generally, the treatment of Gu-chang is divided into Asthenia and Sthenia Syndrome. The method of cure to Sthenia syndrome is heat cleaning and purge fire, Asthenia syndrome is nourish yin to lower and adverse rising energy and strength the middle warmer and benefit vital energy. 5. Following is the medication for Sthenia syndrome. Heat of heart and spleen is Do Jok San, Yang Gyek San, Juk Yup Suk Go Tang, evil heat of external factor is Yang Gyek San Ga Gam, Stasis of liver energy is Chong Wi Fae Dok Yum, moistured heat of spleen and stomach is Chong Gi Sam Syep Tang. The medication for Asthenia Syndrome is following. Deficiency of upper warmer leading to heat is Bo Jung Ik Gi Tang, deficiency of middle warmer leading to cold is Bu Ja Lee Jung Tang, deficiency of lower warmer leading to heat is Yuk Mi Ji Hwang Tang, deficiency of yin leading to hyperactivity of fire is Ji Baek Ji Hwang Hwan, deficiency of yin leading to floating of fire is Lee Jung Tang Ga Bu Ja Medicine for external use were Yang Suk San, Boo Wyen San, Rok Po San, Yoo Hwa San ate. 6. In western medicine, there is no specific treatment for RAS, and management strategies depend on dinical presentation and symptoms and includes antibiotics, oral rinses, glucocorticoids, immunomodulatory drugs, vitamines, analgesics, laser and antiviral agents.

일개 한방병원에 파킨슨병으로 내원한 환자의 사상의학적 특성에 관한 고찰 (The Analysis on Characteristics according to Sasang Constitution of Patients with Parkinson's Disease in a Korean Medicine Hospital)

  • 김소형;이슬;이용재;배나영;이정윤
    • 사상체질의학회지
    • /
    • 제30권3호
    • /
    • pp.62-73
    • /
    • 2018
  • Objectives The aim of this study was to make an analysis of clinical characteristics and status of Sasang constitutional medicine of patients with Parkinson's Disease who visited a Korean medicine hospital. Methods We studied 129 patients with Parkinson's Disease who visited a Korean medicine hospital from September 1, 2012 to June 30, 2018. We retrospectively collected medical history and characteristics of subjects using data of EMR (electronic medical record). Results The proportion of female was higher than male. The average age was 60s. The patients visited a hospital more than one year after the occurrence of symptoms. And they were mostly under western medicine treatment. Among the 129 patients, 56 persons(43.4%) were Taeeumin, 45 persons(34.9%) Soyangin and 28 persons Soeumin(21.7%). In the distribution of prescription according Sasang Constitutional Medicine symptomatology, there was no significant difference in the proportion of exterior cold disease(48.9%) and interior heat disease(51.1%) in Soyangin. Meanwhile the proportion of heat disease's prescription was higher than cold disease in Taeeumin(73.2%) and Soeumin(84.1%). The majority of disease were Dry-febrile symptom(73.2%) of heat disease in Taeeumin, Yang depletion-syndrome(64.3%) of heat disease in Soeumin, and Gyolhyung-symptom(33.3%) of exterior cold disease and Wasting thirst-syndrome(22.2%) of interior heat disease in Soyangin, Conclusions By Developing of guideline for treatment of Parkinson's Disease through analyzing on clinical characteristics and distribution of Sasang Constitutional Medicine symptomatology could contribute to the improvement of the cure rate and accuracy of constitution pattern.