• Title/Summary/Keyword: Heat from Light

Search Result 495, Processing Time 0.031 seconds

Impact of Urban Thermal Environment Improvement by Street Trees and Pavement Surface Albedo (가로수와 바닥 포장 표면 알베도의 도시 열 환경 개선 효과)

  • Na-youn Kim;Eun-sub Kim;Seok-hwan Yun;Zheng-gang Piao;Sang-hyuck Kim;Sang-jun Nam;Hwa-Jun Jea;Dong-kun Lee
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.26 no.1
    • /
    • pp.47-59
    • /
    • 2023
  • Due to climate change and urbanization, abnormally high temperatures and heat waves are expected to increase in urban and deteriorate thermal comfort. Planting of street trees and changing the albedo of urban surfaces are the strategies for mitigating the thermal environment of urban, and both of these strategies affect the exposure and blocking of radiative fluxes to pedestrians. After measuring the shortwave and longwave radiation according to the ground surface with different albedo and the presence of street trees using the CNR4 net radiometer, this study analyzed the relationship between this two strategies in terms of thermal environment mitigation by calculating the MRT(Mean Radiant Temperature) of each environment. As a result of comparing the difference between the downward shortwave radiation measured under the right tree and at the control, the shortwave radiation blocking effect of the tree increased as the downward shortwave radiation increased. During daytime hours (from 11 am to 3 pm), the MRT difference caused by the albedo difference(The albedo of the surfaces are 0.479 and 0.131, respectively.) on surfaces with no tree is approximately 3.58℃. When tree is present, the MRT difference caused by the albedo difference is approximately 0.49℃. In addition, in the case of the light-colored ground surface with high albedo, the surface temperature was low and the range of temperature change was lower than the surrounding surface with low albedo. This result shows that the urban thermal environment can be midigate through the planting of street trees, and that the ground surface with high albedo can be considered for short pedestrians. These results can be utilized in planning street and open space in urban by choosing surfaces with high albedo along with the shading effect of vegetation, considering the use by various users.

Improvement of Response Time of Stimulus-responsive Hydrogel Actuator Using Photothermal Effect of PDPP3T Conjugated Polymer (PDPP3T 공액고분자의 광열효과를 이용한 자극감응성 하이드로젤 액추에이터의 반응속도 향상)

  • In Hyeok Choi;Dongmin Lee;Wonho Lee;Seog-Jin Jeon
    • Journal of Adhesion and Interface
    • /
    • v.25 no.2
    • /
    • pp.69-74
    • /
    • 2024
  • Soft actuators can be applied to various fields such as the medical industry and manufacturing industry due to the flexibility and smooth movement resulted from their constituent materials. Stimuli-responsive hydrogels are a class of materials that can show large volume changes due to various surrounding stimuli and thus is suitable as a soft actuator material. However, because the change in volume of the stimuli-responsive hydrogel depends on the rate of temperature change and the rate at which the solvent diffuses into the polymer network, in most typical operating conditions, the response time of the actuator is slow due to inefficient heat transfer and diffusion process. In this study, a conjugated polymer was introduced into polydiethylacrylamide, a thermoresponsive hydrogel, to implement a soft actuator driven by light, and the improvement in response time by the photothermal effect of the conjugated polymer was investigated. It was confirmed that the response time was improved by 41% by the introduction of the conjugated polymer, due to the improvement in heat transfer efficiency. Finally, a soft gripper using the hydrogel with improved response time was fabricated and the response time of the gripper was investigated.

Study on Characteristics of Antibody from Milk Immunized with Some Helicobacter pylori Antigen (Helicobacter pylori 항원을 이용한 면역우유의 항체특성에 관한 연구)

  • Park, Chang-Ho;Ye, Eun-Ju;Kim, Soo-Jung;Bae, Man-Jong
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.34 no.5
    • /
    • pp.619-625
    • /
    • 2005
  • This study has been carried out to examine the characteristics of anti-H. pylori antibodies of milk produced from cows immunized with antigen of Helicobacter pylori such as peculiarity of antigen antibody, agglutination of H. pylori strain, stability of antibody against acid, alkali and heat treatments. The molecular weight of anti-H. pylori antibody measured by SDS-PAGE were turned out as about 50 kDa in the heavy chain and about 24 kDa in the light chain. Twenty protein bands were visualized in H. pylori interacting with anti-H. pylori antibody which was made in dairy cow by immunization with H. pylori. The western blotting was peformed in order to examine the antigen peculiarity of anti-H. pylori, The results were all 7 antigen substances including serum, furified serum, whey and furified whey could be confirmed and the major antigen substances were 97, 66,34 kDa of molecular weight. As a result of agglutination response anti-H. pylori antibody in whey showed 1/10 agglutination value against H. pylori. In stability test about acid and alkali of antibody, there was $100\%$ activated at the range of $pH5\~pH10$. In stability test about heat, the antibody showed stable condition at $60^{\circ}C$ for 60 minutes and comparatively stable condition at $70^{\circ}C$, but reduced activation to $40\%$ after 60 minutes. It maintained $77\%$ activation at $80^{\circ}C$ for 4 minutes and comparatively stable at $100^{\circ}C$ for 1 minute.

Studies on antimicrobial agent produced by lactobacillus acidophilus (Lactobacillus acidophilus가 생산한 항균물질(抗菌物質)에 관한 연구(硏究))

  • Kim, Dong-shin
    • Korean Journal of Veterinary Research
    • /
    • v.24 no.2
    • /
    • pp.149-162
    • /
    • 1984
  • The research was conducted(1) to confirm the agent(s) responsible for the antimicrobial activity contained in the fermented tomato juice with L. acidophilus(2) to extract and purify the antimicrobial agent(s)(3) to find the biological, physical and chemical properties of the agent(s). The following results were obtained and summarized as followings; 1. The agent responsible for the inhibitory activity was confirmed by both well assay method using fermented tomato juice with L. acidophilus and turbidimetric technique using the cell-free filtrate or neutralized filtrate of tomato acidohilus culture and found exerted antimicrobial agent other than lactic acid. 2. The procedures of purification : The isolation and purification of antimicrobial agent from the lyophilized acidophilus tomato culture were carried out by (1) methanol extraction (2) acetone extraction, (3) Sephadex G-50 gel filtration (4) paper chromatography and (5) thin layer chromatography. 3. The biological, physical and chemical properties of antimicrobial agent: The biological, physical, chemical properties of the purified antimicrobial agent were: (1) The antimicrobial activity was strong against test organisms; Bacillus subtilis(ATCC 6633), Escheichia coli(ATCC 25922), Staphylococcus aureus(ATCC 167), Pseudomonas fluorescens(KFCC 32394), Proteus vulgaris and Shigella dysenteriae. (2) The pH value of the agent was 2.0 and the inhibitory activity was lost when it was neutralized at 7.0 of pH and the agent was heat stable at $121^{\circ}C$ for 60 minutes. (3) The ultraviolet light absorption spectra of methanol-acetone extract and TLC fraction exhibited a maximum absorption at 260nm and 224nm respectively. (4) The most purified agent from TLC plate increased about 130-fold in activity. (5) The agent isolated from TLC plate was free from $H_2O_2$ or lactic acid. 4. Bioautographic assy: By means of bioautography of the agent on silica gel of TLC plate a strong inhibitory activity against B. subtilis was demonstrated. 5. Mass spectrometry: The agent obtained from TLC plate was analyzed by mass spectrometry which show the parent peak at m/e 264 suggesting the molecular weight of the compound and molecular group such as [$C_2H{^+}_4$], [CO], [CH=NH], [$C_3{H^}4_7$], [$\begin{array}{rcl}O\\{\parallel}\\CH_3-C\\\end{array}$], [$C_6-H{^+}_{11}$], [$C_5H{^+}_{11}$], [$\begin{array}{rcl}O\\{\parallel}\\C_5H_7-C^+\\\end{array}$] were suggested.

  • PDF

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • Proceedings of the KOSOMBE Conference
    • /
    • v.1992 no.05
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

Rearing Black Bengal Goat under Semi-Intensive Management 1. Physiological and Reproductive Performances

  • Chowdhury, S.A.;Bhuiyan, M.S.A.;Faruk, S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.15 no.4
    • /
    • pp.477-484
    • /
    • 2002
  • Ninety pre-puberal (6-7 months) female and 15 pre-puberal male Black Bengal goats were collected on the basis of their phenotypic characteristics from different parts of Bangladesh. Goats were reared under semi-intensive management, in permanent house. The animals were vaccinated against Peste Des Petits Ruminants (PPR), drenched with anthelmentics and deeped in 0.5% Melathion solution. They were allowed to graze 6-7 h along with supplemental concentrate and green forages. Concentrates were supplied either 200-300 g/d (low level feeding) or quantity that supply NRC (1981) recommended nutrient (high level of feeding). Different physiological, productive and reproductive characteristics of the breed were recorded. At noon (temperature=$95^{\circ}F$ and light intensity=60480 LUX) rectal temperature and respiration rate of adult male and female increased from 100.8 to $104.8^{\circ}F$ and 35 to 115 breath/min, indicated a heat stress situation. Young female attain puberty at an average age and weight of 7.2$\pm$0.18 months and 8.89$\pm$0.33 kg respectively. Mean age and weight at 1st kidding were 13.5$\pm$0.49 months and 15.3$\pm$0.44 kg respectively. It required 1.24-1.68 services per conception with an average gestation length of 146 days. At low level of feeding the postpartum estrus interval was 37$\pm$2.6 days, which reduced (p<0.05) with high feeding level to 21$\pm$6.9 days. Kidding interval also reduced (p<0.05) from 192 d at low feeding level to 177 d at high feeding level. On an average there were two kiddings/doe/year. Average litter sizes in the 1st, 2nd, 3rd and 4th parity were 1.29, 1.71, 1.87 and 2.17 respectively. Birth weights of male and female kids were 1.24 and 1.20 kg respectively, which increased (p<0.05) with better feeding. Although kid mortality was affected (p<0.05) by dam's weight at kidding, birth weight of kid, milk yield of dam, parity of kidding, season of birth, but pre-netal dam's nutrition found to be the most important factor. Kid mortality reduced from 35% at low level of feeding to 6.5% at high level of feeding of dam during gestation. Apparently, this was due to high (p<0.05) average daily milk yield (334 vs. 556 g/d) and heavier and stronger kid at birth at high feeding level.

A Study on Thermal Properties of Epoxy Composites with Hybrid Fillers (하이브리드 필러를 함유한 에폭시 복합체의 열적 특성 연구)

  • Lee, Seungmin;Rho, Hokyun;Lee, Sang Hyun
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.26 no.4
    • /
    • pp.33-37
    • /
    • 2019
  • In this study, the graded thermal properties of composites are obtained by difference in specific gravity of fillers including Cu, h-BN and GO powders in epoxy. Relatively heavy powders such as Cu and h-BN compared to GO mostly at the bottom layer, while light GO powders were dispersed in the top layer in the composites. The thermal conductivity of composites was gradually increased from 0.55 (0.52) W/mK to 2.82 (1.37) W/mK for GO/h-BN (GO/Cu) epoxy composites from surface to bottom. On the contrary, the coefficient of thermal expansion was decreased from 51 ppm/℃ to 23 ppm/℃ and from 57 ppm/℃ to 32 ppm/℃ for GO/Cu and GO/h-BN, respectively. The variation of thermal properties in composites is attributed due to intrinsic material properties of filler including thermal conductivity, morphology and the distribution by the specific weight of fillers. This simple strategy for realizing graded thermal composites by introducing different filler materials would be effective heat transfer at interface of heterostructure with large thermal properties such as inorganic semiconductor/plastic, metal/plastic, and semiconductor/metal.

Photochromic Properties of Cellulose Derivatives Having Spirobenzopyran Group (스피로벤조피란을 포함하는 셀룰로오스 유도체의 광변색 특성)

  • Xiangdan, Li;Kim, Eun-Kyoung;Lee, Myong-Hoon
    • Polymer(Korea)
    • /
    • v.29 no.1
    • /
    • pp.25-31
    • /
    • 2005
  • Cellulose acetate derivatives containing 6-(p-hexyloxyphenyl)carbonyl spirobenzopyran (CA-COSP) were prepared from base-catalyzed etherification of cellulose acetate, and their physical and photochromic properties were characterized. The degree of substitution of COSP was calculated from the amount of residual hydroxyl groups in cellulose acetate measured by the $^1H$-NMR and UV spectrometric data. It was ranging from 0.87 to 45.5% depending on the reaction condition. UV/vis spectrometry of the resulting CA-COSP revealed that the polymer shows a reversible color change by changing its color from colorless to blue upon UV irradiation forming a merocyanine structure, and returning back again to colorless spiropyran structure by visible light or by heat. The rate of color change was faster in solution than in the film. In the more polar solvent, the more stable was the resulting merocyanine, and the slower was the rate of reverse reaction to spiropyran. Compared to COSP blended with cellulose acetate, in which a phase separation was observed for samples containing more than 0.9 wt% of COSP, up to 48 wt% of COSP could be blended in CA-COSP without phase separation.

Estimation of the Optimal Periods for Planting and Felling Larix kaempferi Based on the Period of Its Cambial Activity (형성층 활동 기간을 활용한 일본잎갈나무 식재 및 벌채 적기 추정)

  • YOO, Hye-Ji;JU, Jeong-Deuk;PARK, Jun-Hui;SHIN, Chang-Seob;EOM, Chang-Deuk;SEO, Jeong-Wook
    • Journal of the Korean Wood Science and Technology
    • /
    • v.49 no.5
    • /
    • pp.399-415
    • /
    • 2021
  • This study was conducted to suggest the optimal periods for planting and felling Larix kaempferi tree by monitoring its cambial activity period. In addition, the heat summation to induce the cambial activity of Larix kaempferi was investigated. The study sites were at Mt. Worak and Mt. Midong. After selecting 5 trees at Mt. Worak and Mt. Midong, the cambium samples were collected using a mini trephor with 2 mm diameter from April 7 to October 6, 2017 at Mt. Worak, and from April 7 to September 29, 2017 at Mt. Midong. After the collected cambium samples were embedded in PEG2000, transverse thin sections with a thickness of 10 to 15 ㎛ were prepared using a microtome. One Larix kaempferi sample from each site, Mt. Worak and Mt. Midong, in which the accurate monitoring of cambial activity was impossible due to the formation of traumatic resin canal, was excluded from the study. The observation of the initiation date of cambial activity under a light microscopy revealed that 2 specimens from Mt. Worak and 3 from Mt. Midong showed the initiation on April 28. The remaining 2 specimens of Mt. Worak and 1 specimen of Mt. Midong were initiated on May 4, which was a week later than the others. The heat summation that induced the initiation of cambial activity was 196.4-271.8 at Mt. Worak and 204.7-277.3 at Mt. Midong, which was similar. The termination of cambial activity occurred between August 4 and 25 at Mt. Worak, and between August 4 and September 1 at Mt. Midong. Based on the above results, it was found that the optimal planting period for Larix kaempferi in Mt. Worak and Mt. Midong was before April, about a month before the cambium activity, and the felling period was from October when the cambial activity was completely terminated.

Chemical and Optical Absorption Spectroscopic Study of Colored Tourmalines (유색 전기석의 화학적 및 광학흡수 분광학적 연구)

  • Kim, Hee-Jong;Kim, Soo-Jin
    • Journal of the Mineralogical Society of Korea
    • /
    • v.6 no.1
    • /
    • pp.1-16
    • /
    • 1993
  • The chemical and optical absorption spectroscopic characters of pink and colorless tourmalines from San Diego mine in California, U.S.A., blue/green tourmalines from anonymous mine, Brazil, and brownis black tourmalines from Uncheon and Haksan mines in Korea have been studied using X-ray diffractometer, electron microprobe, optical absorption spectroscopy, and heat treatment. Least-squares refinements give unit cell diminsions : a = 15.96-16.01 ${\AA}$, c = 7.15-7.16 ${\AA}$ for the brownish black tourmalines, a = 15.82 - 15.87 ${\AA}$, c = 7.09 - 7.10 ${\AA}$ for pink tourmalines, and a = 15.88 - 15.94 ${\AA}$, c = 7.12 - 7.15 ${\AA}$ for blue green tourmalines. The colors of tourmalines are responsible for the transition elements. The pink color is attributed to the $Mn^{3+}$ ions, the blue-green to $Fe^{2+}$ and $Mn^{2+}$, bluish green to $Cu^{2+}$, and the brownish black to $Fe^{2+}$, $Fe^{2+}$ - $Fe^{3+}$, and $Fe^{2+}$ - $Ti^{4+}$. The $Mn^{3+}$ ions of pink color tourmalines are stabilized in the Y sites compressed along the O(1)H-O(3)H axis by Jahn-Teller distortion. Heating removes the pink or red component from tourmalines, producing the colorless stones from the pink and red ones. The bluish green samples change into the greenish blue ones and a certain yellowish green samples change into the light green ones by heat treatment. In the elbaite-schorl series, the concentration of Fe and Mn are variable depending on the color zones. The green zone is characterrized by the high content of Fe and Mn are variable depending on the color zones. The green zone is characterized by the high content of Fe, whereas the pink zone by the high content of Mn. Mn increases in deep yellow zone compared with yellow or colorless zones.

  • PDF