• 제목/요약/키워드: Heat exchanger tube

검색결과 777건 처리시간 0.025초

고온, 고압 알칼리 수용액에서의 Alloy 600 산화막 특성에 미치는 납 농도 영향 (Effect of Lead Concentration on Surface Oxide Formed on Alloy 600 in High Temperature and High Pressure Alkaline Solutions)

  • 김동진;김현욱;문병학;김홍표;황성식
    • Corrosion Science and Technology
    • /
    • 제11권3호
    • /
    • pp.96-102
    • /
    • 2012
  • 0.1 M NaOH 용액에 PbO첨가양이 증가함에 따라 Alloy 600에 형성되는 산화막의 부동태 피막 특성이 열화되었다. 또한 뚜렷한 2중층 구조의 산화막이 점차 사라지고, 산화막내 존재하는 납의 양이 증가하였다. 산화막 내부 납의 양이 증가함에 따라 산화막 내부 니켈의 결핍이 점차 커졌다. 납에 의해 산화막의 부동태 특성이 약화됨에 따라, 응력부식균열 저항성 또한 급감하였을 것으로 판단된다.

Study of oxidation behavior and tensile properties of candidate superalloys in the air ingress simulation scenario

  • Bin Du;Haoxiang Li;Wei Zheng;Xuedong He;Tao Ma;Huaqiang Yin
    • Nuclear Engineering and Technology
    • /
    • 제55권1호
    • /
    • pp.71-79
    • /
    • 2023
  • Air ingress incidents are major safety accidents in very-high-temperature reactors (VHTRs). Air containing a high volume fraction of oxygen may cause severe oxidation of core components at the VHTR, especially for the significantly thin alloy tube wall in the intermediate heat exchanger (IHE). The research objects of this study are Inconel 617 and Incoloy 800H, two candidate alloys for IHE in VHTR. The air ingress accident scenario is simulated with high-temperature air flow at 950 ℃. A continuous oxide scale was formed on the surfaces of both the alloys after the experiment. Because the oxide scale of Inconel 617 has a loose structure, whereas that of Incoloy 800H is denser, Inconel 617 exhibited significantly more severe internal oxidation than Incoloy 800H. Further, Inconel 617 showed a significant decrease in ultimate tensile strength and plasticity after aging for 200 h, whereas Incoloy 800H maintained its tensile properties satisfactorily. Through control experiment under vacuum, we preliminarily concluded that serious internal oxidation is the primary reason for the decline in the tensile properties of Inconel 617.

Fundamental evaluation of hydrogen behavior in sodium for sodium-water reaction detection of sodium-cooled fast reactor

  • Tomohiko Yamamoto;Atsushi Kato;Masato Hayakawa;Kazuhito Shimoyama;Kuniaki Ara;Nozomu Hatakeyama;Kanau Yamauchi;Yuhei Eda;Masahiro Yui
    • Nuclear Engineering and Technology
    • /
    • 제56권3호
    • /
    • pp.893-899
    • /
    • 2024
  • In a secondary cooling system of a sodium-cooled fast reactor (SFR), rapid detection of hydrogen due to sodium-water reaction (SWR) caused by water leakage from a heat exchanger tube of a steam generator (SG) is important in terms of safety and property protection of the SFR. For hydrogen detection, the hydrogen detectors using atomic transmission phenomenon of hydrogen within Ni-membrane were used in Japanese proto-type SFR "Monju". However, during the plant operation, detection signals of water leakage were observed even in the situation without SWR concerning temperature up and down in the cooling system. For this reason, the study of a new hydrogen detector has been carried out to improve stability, accuracy and reliability. In this research, the authors focus on the difference in composition of hydrogen and the difference between the background hydrogen under normal plant operation and the one generated by SWR and theoretically estimate the hydrogen behavior in liquid sodium by using ultra-accelerated quantum chemical molecular dynamics (UA-QCMD). Based on the estimation, dissolved H or NaH, rather than molecular hydrogen (H2), is the predominant form of the background hydrogen in liquid sodium in terms of energetical stability. On the other hand, it was found that hydrogen molecules produced by the sodium-water reaction can exist stably as a form of a fine bubble concerning some confinement mechanism such as a NaH layer on their surface. At the same time, we observed experimentally that the fine H2 bubbles exist stably in the liquid sodium, longer than previously expected. This paper describes the comparison between the theoretical estimation and experimental results based on hydrogen form in sodium in the development of the new hydrogen detector in Japan.

저열유속에서 상변화를 수반하는 메탄의 유동거동특성 (The Flow Behavior Characteristics of Methane with Phase Change at Low Heat Flux)

  • 최부홍
    • 해양환경안전학회지
    • /
    • 제20권1호
    • /
    • pp.96-103
    • /
    • 2014
  • 극저온 액체 상태의 LNG는 주거용과 산업용으로 공급되기 전에 가스 상태로 변환된다. 이러한 재가스화 과정 중에 LNG는 $83.7{\times}10^4$ kJ/kg 정도의 많은 냉열에너지를 제공한다. 이 냉열에너지를 일부 선진국들에서는 질소, 수소, 헬륨과 같은 극저온 유체들의 액화, 제빙 및 냉방시스템에 이용하고 있다. 따라서 우리나라에서도 인천, 평택 및 통영 LNG 인수기지 주변에 LNG의 냉열에너지를 이용한 냉열에너지 회수시스템을 설립할 필요가 있다. 여기서는 저열유속상태에서 상변화를 동반하는 LNG의 유동거동 특성을 파악하기 위해 LNG의 85 %를 차지하는 메탄을 작동유체로 사용하였다. 또한 본 논문은 극저온 열교환기 내부를 흐르는 메탄과 질소, 프로판, R11 및 R134a의 유동경계에 영향을 주는 관 직경, 관의 경사각도 및 포화압력의 효과를 보여준다. 또한 여기서 얻어진 이론적 연구결과와 기존의 실험 데이터와도 비교 되었다. 그리고 메탄의 유동경계에 주는 파이프의 경사각도의 영향은 매우 큼을 알 수 있었다.

다중채널 와전류탐상검사 장치 개발(II) (Development of a Multichannel Eddy Current Testing Instrument(II))

  • 이희종;남민우;조찬희;유현주;김인철
    • 비파괴검사학회지
    • /
    • 제31권5호
    • /
    • pp.552-559
    • /
    • 2011
  • 전자기유도(electromagnetic induction) 현상을 이용한 비파괴진단기법으로서 최근까지 와전류탐상기법, 교류장측정기법, 자속누설검사기법, 그리고 원격장검사기법 등이 개발되어 활용되고 있다. 이 기법 중 와전류탐상기법은 오늘날 발전설비, 화학, 조선 및 군수설비 등의 열교환기 전열관 비파괴검사에 널리 적용되고 있다. 와전류탐상검사 시스템의 구성은 기능별로 와전류신호 합성 모듈, 아날로그 모듈, 디지털 신호처리를 위한 아날로그-디지털 변환 모듈, 전원공급장치 및 신호취득 평가 프로그램 등으로 구성되며, 선행 연구(I)에서는 다중채널방식의 와전류탐상검사 시스템의 구성 요소 중 1차로 와전류신호 합성 모듈, 아날로그 모듈을 설계 개발하였으며, 2차로 와전류 신호 취득 평가 프로그램을 개발하였다. 2차 연구에서 개발한 와전류 신호취득 평가 프로그램의 운영체제는 "Windows 7"로서 국내 사용자를 위해 최적화 하였으며, 주요 특징은 검사자가 "setup wizard"를 이용하여 검사에 필요한 검사 조건 및 변수를 용이하게 설정하고 이를 이용하여 신호취득 및 평가를 수행할 수 있다. 본 논문에서는 개발된 와전류신호 수집 및 평가 프로그램의 구성과 각 기능을 설명하고자 한다.

연속식 마이크로파 고온단시간 살균시스템에서 우유의 살균효과 (Pasteurization Efficiency of a Continuous Microwave HTST)

  • 김석신;이주희;김상용
    • 한국식품과학회지
    • /
    • 제31권5호
    • /
    • pp.1392-1396
    • /
    • 1999
  • 우유의 저온살균시 품질손상의 원인이 되는 fouling발생을 극소화시키면서 균을 사멸시키기 위하여 마이크로파를 이용한 우유의 살균에 대한 연구를 시도하였다. 이에따라 연속식 마이크로파 HTST 시스템을 설계 제작한 후, 우유를 HTST$(72^{circ}C$, 15초)법으로 살균하되 열수만을 이용한 경우(MP0)와 마이크로파로 온도를 올린 후 열수에서 holding한 경우(MP1)와 마이크로파만을 활용한 경우(MP2)의 세가지로 구분하여 미생물의 사멸효과를 총생균수, 대장균수, 저온성세균수 및 phosphatase 활성으로 구분하여 비교해 보았다. 총균수와 저온성 세균수의 경우 세가지 HTST살균법 모두 살균후 초기균수의 3 log 정도 감소하는 살균효과를 보여주었다. 살균방법별 살균효과는 MP0>MP2>MP1의 순서를 보였고 유의차(p<0.05)도 있는 것으로 나타났으나 원유의 초기미생물수와 함께 통계처리할 경우는 살균방법 사이의 유의차는 보이지 않았다. 대장균과 phosphatase activity의 경우 세가지 HTST 살균법 모두 살균후 우유의 배양실험에서 대장균 집락이 확인되지 않거나 살균후 음성(negative)인 것으로 나타나 살균방법 사이의 살균효과에 차이가 없음을 확인시켜주었다. 따라서 마이크로파 단독처리(MP2) 또는 마이크로파로 승온시킨 후 원하는 온도에서 holding하는 병용법(MP1)을 활용할 경우 통상적 HTST법에서 문제가 되는 fouling을 방지하면서 거의 대등한 살균효과를 얻을 수 있을 것으로 예상하였다 얻어진 연구결과를 토대로 우유 및 타 액상식품의 살균에도 확대 적용할 수 있으리라 기대된다.

  • PDF

다중채널 와전류탐상검사 장치 개발(I) (Development of a Multichannel Eddy Current Testing Instrument(I))

  • 이희종;남민우;조찬희;윤병식;조현준
    • 비파괴검사학회지
    • /
    • 제30권2호
    • /
    • pp.155-161
    • /
    • 2010
  • 전자기유도(electromagnetic induction) 현상을 이용한 비파괴진단기법으로 최근까지 와전류탐상기법, 교류장측정기법, 자속누설검사기법, 그리고 원격장검사기법 등이 개발되어 활용되고 있었다. 이 기법중 와전류탐상기법은 오늘날 발전설비, 화학, 조선 및 군수설비 등의 열교환기 전열관 비파괴검사에 널리 적용되고 있다. 와전류탐상검사 시스템의 구성은 기능별로 와전류신호 합성 모듈, 아날로그 모듈, 디지털 신호처리를 위한 아날로그-디지털 변환 모듈, 전원공급장치 및 신호취득 평가 프로그램 등으로 구성되며, 본 연구에서는 다중채널방식의 와전류탐상검사 장치(하드웨어) 개발에 필요한 구성 요소중 1차적으로 와전류신호 합성 모듈, 아날로그 모듈을 설계 개발하였다. 본 연구에서 개발한 와전류탐상검사 장치의 특정은 주파수영역 및 시간영역 다중화 방식에 의한 최대 4개 주파수의 동시 적용이 가능한 다중채널장치이다. 와전류신호 합성 모듈, 아날로그 모듈을 구성하는 각 회로에서 와전류신호 발생, 변조, 전처리, 변조 및 신호 디스플레이를 위한 신호가 적절하게 처리되어 최종적으로 와전류신호 평가에 필수적인 리사쥬신호가 임피던스 평면 내에 디스플레이 되는 것을 확인하였다.