• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.153-160
• /
• 2021

Land Surface Temperature (LST) is the radiological surface temperature which observed by satellite. It is very important factor to estimate condition of the Earth such as Global warming and Heat island. For these reasons, many countries operate their own satellite to observe the Earth condition. South Korea has many landcovers such as forest, crop land, urban. Therefore, if we want to retrieve accurate LST, we would use high-resolution satellite data. In this study, we made LSTs with 4 LST retrieval algorithms which are used widely with Landsat-8 data which has 30 m spatial resolution. We retrieved LST using equations of Price, Becker et al. Prata, Coll et al. and they showed very similar spatial distribution. We validated 4 LSTs with Moderate resolution Imaging Spectroradiometer (MODIS) LST data to find the most suitable algorithm. As a result, every LST shows 2.160 ~ 3.387 K of RMSE. And LST by Prata algorithm show the lowest RMSE than others. With this validation result, we choose LST by Prata algorithm as the most suitable LST to South Korea.

• 대한토목학회논문집
• /
• 제41권6호
• /
• pp.627-635
• /
• 2021

본 논문은 교량 하부에서 발생된 화재에 대한 강합성 교량 상부구조의 화재손상 및 구조성능평가를 위한 수치해석적 연구이다. 수치해석의 정확성 및 효율성을 높이기 위해 구성재료의 비선형 열적·열역학적 특성이 고려된 유체-구조 연성 화재해석 기법이 제안되고, 각각 ANSYS FLUENT 및 Mechanical solver에 연결되어 해석이 수행된다. 이는, 실제 강합성 교량 화재사고와 비교·검증되며, 검증된 해석기법을 통해 화원에서 교량 하부 플랜지까지 이격거리에 따른 화재별 부재의 온도분포 및 구조성능이 평가된다. 해석결과, 강합성 교량 상부구조의 콘크리트 슬래브 및 강재 거더 하부 플랜지의 경우 실제 화재사고에 대하여 임계온도를 초과하였다. 또한, 화원 이격거리가 13 m 이상일 경우 유조차 화재사고에 대한 강합성 교량 구조물의 화재손상이 안전한 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2311-2320
• /
• 2022

The main outcomes of the experiments H2P6 performed in the thermal-hydraulics large-scale PANDA facility at PSI in the frame of the OECD/NEA HYMERES-2 project are presented in this article. The experiments of the H2P6 series consists of two PANDA tests characterized by the activation of three (H2P6_1) or one (H2P6_2) cooler(s) in an initially stratified and pressurized containment atmosphere. The initial stratification is defined by a helium-rich region located in the upper part of the vessel and a steam/air atmosphere in the lower part. The activation of the cooler(s) results i) in the condensation of the steam in the vicinity of the cooler(s), ii) the corresponding activation of large scale natural circulation currents in the vessel atmosphere, with the result of iii) the re-distribution and mixing of the Helium stratification initially located in the upper half of the vessel and iv) the continuous pressure decay. The initial helium layer represents hydrogen generated in a postulated severe accident. The main question to be answered by the experiments is whether or not the interaction of the different, localized cooler units would be important for the application of numerical methods. The paper describes the initial and boundary conditions and the experimental results of the H2P6 series with the suggestion of simple scaling laws for both experiments in terms of i) the temperature difference(s) across the cooler(s), ii) the transient steam and helium content and iii) the pressure decay in the vessel. The outcomes of this scaling indicate that the interaction between separate, closely localized units does not play a prominent role for the present experiments. It is therefore reasonable to model several units as one large component with equivalent heat transfer area and total water flow rate.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2743-2759
• /
• 2020

A detailed computational fluid dynamics (CFD) simulation analysis model was developed using ANSYS CFX 16.1 and analyzed to simulate the basic design and internal flow characteristics of a 180 MW small modular reactor (SMR) with a natural circulation flow system. To analyze the natural circulation phenomena without a pump for the initial flow generation inside the reactor, the flow characteristics were evaluated for each output assuming various initial powers relative to the critical condition. The eddy phenomenon and the flow imbalance phenomenon at each output were confirmed, and a flow leveling structure under the core was proposed for an optimization of the internal natural circulation flow. In the steady-state analysis, the temperature distribution and heat transfer speed at each position considering an increase in the output power of the core were calculated, and the conceptual design of the SMR had a sufficient thermal margin (31.4 K). A transient model with the output ranging from 0% to 100% was analyzed, and the obtained values were close to the T_hot and T_cold temperature difference value estimated in the conceptual design of the SMR. The K-factor was calculated from the flow analysis data of the CFX model and applied to an analysis model in RELAP5/MOD3.3, the optimal analysis system code for nuclear power plants. The CFX analysis results and RELAP analysis results were evaluated in terms of the internal flow characteristics per core output. The two codes, which model the same nuclear power plant, have different flow analysis schemes but can be used complementarily. In particular, it will be useful to carry out detailed studies of the timing of the steam generator intervention when an SMR is activated. The thermal and hydraulic characteristics of the models that applied porous media to the core & steam generators and the models that embodied the entire detail shape were compared and analyzed. Although there were differences in the ability to analyze detailed flow characteristics at some low powers, it was confirmed that there was no significant difference in the thermal hydraulic characteristics' analysis of the SMR system's conceptual design.

• 대한본초학회지
• /
• 제34권1호
• /
• pp.1-11
• /
• 2019

Objective : An allergy to peanuts is a major cause of fatal food-induced anaphylaxis, with food allergies becoming an increasingly important health research issue. Food allergy as clinical entity has been recongnized for many years, although there is yet no general concord as to the incidence of this symptom.1) Methods : This study was undertaken to verify the effect of seeds of Canavalia gladiata (Jacq.) DC. extract (CGE) on the inhibition of allergic reactions using a cholera toxin and peanut extract-immunized food allergy mouse model. We determine whether the changes in rectal temperature were related to energy consumption owing to heat production in the body. Mast cell distribution and degranulation in the dermis and epidermis were observed with an optical microscope. Subsequently, Ara h1 levels in serum and interleukin (IL)-4, IL-10, and $IFN-{\gamma}$ levels in cultured supernatants of splenocytes were measured. Results : CGE treatment significantly attenuated the secretion of the Ara h1 antibody in serum and splenocytes. Ara h 1 was undetected in the cholera toxin and peanut extract-immunized food allergy mouse model. Improvement in ear tissue inflammation symptoms was the CGE experimental group. In the control group and peanut extract control group, the expression of mast cells was higher, whereas that in the CGE experimental group was significantly lower. Conclusion : CGE causes suppression in a food allergy mouse model via the inhibition of Ara h1 secretion, and might be useful for developing functional health foods.

• 소성∙가공
• /
• 제31권2호
• /
• pp.51-56
• /
• 2022

In this study, finite element analyses were performed by applying a stress ring and split die design to relieve the tensile stress acting on the die due to high surface pressure during warm-closed forging. The applied material was a yield-ratio-control-steel (YRCS). It was used without quenching or tempering after forging. In the case of stress rings design, the number of stress rings and the tolerance for shrink fit were different. Vertical and horizontal splits were applied for insert die split design. Case 5 die with three stress rings, 0.2 % shrink fit tolerance, and vertical split was selected as an effective die design for tensile stress reduction. Based on die stress reduction analyses, Case 5 die for warm-closed forging was produced and smooth forgeability was secured, making it possible to manufacture forging product of yoke with the required geometry. In addition, controlled cooling using warm forging heat was applied to secure mechanical properties of yokes. When oil cooling was used for direct controlled cooling after warm-closed forging, a relatively uniform Rockwell hardness distribution and high mechanical properties could be obtained.

• 한국군사과학기술학회지
• /
• 제26권1호
• /
• pp.102-112
• /
• 2023

This research mainly focuses on the transport and dispersion of chemical agent plume according to the Lagrangian Puff Model and Lagrangian Particle Model of NBC_RAMS(Nuclear, Biological, Chemical Reporting And Modeling S/W System). NBC_RAMS was developed with the purposes of estimating the fate of Chemical, Biological, and Radioactive(CBR) agent plumes and evaluating damages in the Republic of Korea. First, it calculates the local weather pattern, i.e. wind speed, wind direction, and temperature, by considering the effects of land uses and topography. The plume behaviors are calculated by adopting the Lagrangian Puff Model(LPFM) or Lagrangian Particle Model(LPTM). In this research, we assumed a virtual chemical agent exposure event in a stable atmospheric condition during the summer season. The plume behaviors were estimated by both LPFM and LPTM on the used area(urbanized and dry area) and the agricultural land. The higher heat flux in the used area led to stronger winds and further downward movement moving of the chemical agent than the farmland. The lateral dispersion of the chemical plume was emphasized in the Lagrangian Puff Model because it adopted Gaussian distribution.

• 융합정보논문지
• /
• 제12권3호
• /
• pp.294-301
• /
• 2022

본 연구에서는 열전발전기에 장착된 열전소자 간의 불균일한 온도편차에 의해 발생하는 부정합 손실을 저감할 수 있는 Multi-layer Cascade (MLC) 전기연결 방법을 제안한다. MLC의 성능을 검증하기 위해 열유동 현상 뿐만 아니라 열전소자에서 발생하는 다중물리현상을 반영한 수치해석 모델을 개발하였다. MLC는 고온도차를 경험하는 소자와 저온도차를 경험하는 소자를 서로 다른 Layer에 배치하여 구현할 수 있으며, 고온도차 소자와 저온도차 소자의 분류에는 수치해석 모델을 통해 얻어진 소자별 고온부 표면 온도를 활용하였다. MLC를 구성하는 각 Layer의 전기분선 비율을 변화시키며 이상적인 열전발전 성능과의 비교를 통해 MLC의 부정합손실 저감특성을 확인하였다. 최적 분선비율로 구성한 MLC의 경우 이상적인 결과 대비 96.5%의 발전성능을 보였으며, 열원의 유량이 적거나 발전시스템의 크기가 증가하여 소자 간의 온도편차가 클수록 부정합손실 저감효과가 더욱 증가하는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2621-2627
• /
• 2023

In Experimental Advanced Superconducting Tokamak (EAST) experiments, to achieve long pulse and high-power ICRH system operation, a new kind of ICRH antenna has been designed. One of the most critical factors in limiting the operation of long pulse and high power is the intense heat load in the front face of the ICRH antenna, especially the Faraday Screen (FS). Therefore, the cooling channels of FS need to be designed. According to thermal-hydraulic analysis, the FS tubes are divided into several groups to achieve more excellent water cooling capability. The number of series and parallel tubes in one group is chosen as six. This antenna went into service in the spring of 2021, and it is delightful that the temperature distribution of the FS tube is below 400 ℃ in 14.5 s and 1.8 MW ICRH system operation. However, the active water-cooling design was not carried out on the upper and lower plates of FS, which led to severe ablations on that region under long pulse and high power operation, and the temperature is up to 800. Therefore, the upper and lower side plates of the FS were designed with water cooling based on thermal-hydraulic analysis. During the 2022 winter experiments, the temperature of ICRH antenna FS was lower than 400 in the pulse of 200s and the power of 1 MW operation.

• 소성∙가공
• /
• 제32권6호
• /
• pp.344-351
• /
• 2023

The use of Zn-Al-Mg alloy coatings for enhancing the corrosion resistance of steel sheets is gaining prominence over traditional Zn coatings. There is a growing demand for the development of thermal spray wires made from Zn-Al-Mg alloys, as a replacement for the existing wires produced using Al and Zn. This is particularly crucial to secure corrosion resistance and durability in the damaged areas of coated steel sheets caused by deformation and welding. This study focuses on the casting and extrusion processes of Zn-2Al-1Mg alloy for the fabrication of such spray wires and analyzes the changes in microstructure during the extrusion process. The Zn-2Al-1Mg alloy, cast in molds, was subjected to a heat treatment at 250 ℃ for 3 hours prior to extrusion. The extrusion process was carried out by heating both the material and the mold up to 300 ℃. Microstructural analysis was conducted using FE-SEM and EDS to differentiate each phase. The mechanical properties of the cast specimen were evaluated through compression tests at temperatures ranging from 200 to 300 ℃, with strain rates of 0.1 to 5 sec^-1. Vickers hardness testing was utilized to assess the inhomogeneity of mechanical properties in the radial direction of the extruded material. Finite Element Analysis (FEA) was employed to understand the inhomogeneity in stress and strain distribution during extrusion, which aids in understanding the impact of heterogeneous deformation on the microstructure during the process.