• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.3-9
• /
• 2013

Development of housing, industrial and public lands has been a cause to increase a temperature of a city higher than that of a rural area. Knowing that, the research analyzed temperature changes in a riverside district and a coastal area depending on the land usage and climate change in the areas. Add to this, the study examined a correlation between topographic characteristics and temperature changes. According to the results, the temperature was increased by $1.80^{\circ}C$ in 2007 comparing to 2003 while the wind velocity was reduced by 0.24m/s. In addition, a more number of areas were designated as build-up areas which, in return, decreased the forested land. The analysis on the correlation reported that the riverside district has more of grassland and bare land while the coastal area has more of wooded land and grassland. The study is expected to be used as fundamental data for research on heat island effect which would be different by each regional characteristic as it proposes measures to solve the heat island effect.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.39-42
• /
• 2006

Recently, more highly effective construction materials are needed for the reasonable and economical structure system is required as the construction structures become more multi storied, large-sized and diversified. That is to say, the highly qualified concrete, the molt universal construction material is positively promoted as a part of plan to establish the effective space according to the dead load of structures and diminish of segment profile and to build up the economic structures. In particular, it is tendency of that the study for high strength concrete increases and construction example of reinforced concrete (RC) using the high strength concrete partially increases. However, the high strength concrete has the problems such high brittleness and low ductility. Specially, for the high strength concrete, it has different strength from normal concrete as the internal temperature goes up steadily due to high heat of hydration by the quantities of highly level of cement, so the concrete which is mixed with various scible materials is used. This study conducted a basic experiment to conclude an adequate selection of materials and to calculate an optimal mixing proportion of those materials to produce High-strength concrete. And also we conducted an experiment to find out basic properties of this concrete such as slump-flow, strength.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.75-79
• /
• 2006

Recently, more highly effective construction materials are needed for the reasonable and economical structure system is required as the construction structures become more multi storied, large-sized and diversified. That is to say, the highly qualified concrete is positively promoted as a part of plan to establish the effective space according to the dead load of structures and diminish of segment profile and to build up the economic structures. However, the high strength concrete has the problems such high brittleness and low ductility. Specially, for the high strength concrete, it has different strength from normal concrete as the internal temperature goes up steadily due to high heat of hydration by the quantities of highly level of cement, so the concrete which is mixed with various miscible materials is used. As the development and study for high strength concrete (more than $100N/mm^2$) is under way actively and the strength of high strength concrete increases, the strength different from the existing high strength concrete of ten than $100N/mm^2$, but the study for this is not adequate and indefinite. In addition, the study and report to apply the strength expression and analysis results of internal structure. Therefore, this study is an experiment about using the miscible materials affects what happens to the longitudinal physical property.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.17 no.4
• /
• pp.382-394
• /
• 1988

Dynamic characteristics of thermally-forced stratification process in a square enclosure with a linear temperature profile at the side walls have been investigated through flow visualization experiment and numerical analysis. The experiment was performed on air with the Rayleigh numbers of order $10^5$. A particle tracer method is used for the flow visualization and to obtain a sudden linear temperature profile at the side walls copper blocks which already have a linear temperature profile are come into contact with the thin copper plates of the test section. Immediately a meridional circulation is developed and heat transfer takes place from the wall to the interior region by circulation of fluid and finally a thermal stratification is achieved. In the numerical study, QUICK scheme for convective terms, SIMPLE algorithm for pressure correction, and the implicit method for the time marching are adopted for the integration of conservation equations. Comparison of flow visualization and numerical results shows that the developing flow patterns are very similar in dynamic nature even though there is a time lag due to the inevitable time delay in setting up a linear temperature profile. For high Rayleigh numbers, the oscillatory motion is likely to take place and stratified region is extended. However, initial temperature adjustment process is much slower than that for low Rayleigh numbers.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.112-120
• /
• 2014

Purpose: This study compared the shear bond strength of heat pressed and feldspathic porcelain to metal. Through thermocycling, the clinical aspect of heat pressed porcelain fused metal was estimated. Materials and Methods: 90 non-precious metal specimens were made ($4{\times}4{\times}8 mm$) and divided to three groups. All spicimens were treated and built-up with the porcelain ($4{\times}4{\times}3 mm$) by 2 different methods according to group: Group I: $Inspiration^{(R)}$, Group II: Ivoclar, IPS $Inline^{(R)}PoM$, Group III: GC Initial IQ-One $Body^{(R)}PoM$. The half of each group's specimens were thermocycled. All specimens' shear bond strength were measured by Instron universal testing machine. Exact measuring point was far 1 mm from porcelain/metal interface to the porcelain side. For the statistical analysis, 2-way ANOVA was used. Results: In no-thermocycling specimens, the shear bond strength showed no statistical significance between each group (P > 0.05). In comparison between nothermocycling and thermocycling specimens in each group, the shear bond strength was decreased according to thermocycling, but there was no statistical significance (P > 0.05). In thermocycling specimens, there was no statistical significance between each group (P > 0.05). Conclusion: In feldspathic porcelain and other two types heat pressed porcelain, there was no statistical difference in the shear bond strength of porcelain to metal. The heat pressed porcelain seems to be clinically useful for the aspect of the shear bond strength.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4348-4358
• /
• 2022

The thermal-hydraulics phenomena in a containment during an accident will necessarily include radiative heat transfer (i) within the gas mixture due to the high radiative absorption and emission of steam and (ii) between the gas mixture and the surrounding structures. The analysis of some previous PANDA experiments (PSI, Switzerland) demonstrated the importance of the proper modelling of radiation for the benefit of numerical simulations. These results together with dedicated scoping calculations conducted for the present experiments indicated that the radiative heat transfer is considerable, even for a very low amount of steam (≈2%). The H2P2 series conducted in the large-scale PANDA facility at the Paul-Scherrer-Institut (PSI) in the framework of the OECD/NEA HYMERES-2 project is intended to enhance the understanding of thermal radiation phenomena and to provide a benchmark for corresponding numerical simulations. Thus, the test matrix was tailored around the two opposite extremes: either gas compositions with small steam content such that radiative heat transfer phenomena can be neglected. Or gas mixtures containing larger amounts of steam, so that radiative heat transfer is expected to play a dominant role. The H2P2 series consists of 5 experiments designed to isolate the radiation phenomena from convective and diffusive effects as much as possible. One vessel with a diameter of 4 m and a height of 8 m was preconditioned with different mixtures of air / steam at room and elevated temperatures. This was followed by the build-up of a stable helium stratification at constant pressure in the upper part of the vessel. After that, helium was injected from the top into the vessel which leads to an increase of the vessel pressure and a corresponding elevation-dependent and transient rise of the gas temperature. It is shown that even the addition of small amounts of steam in the initial gas atmosphere considerably impacts the radiative heat transport throughout all phases of the experiments and markedly influences i) the monitored gas peak temperature, ii) the temperature history during the compression and iii) the following relaxation phase after the compression was stopped. These PANDA experiments are the first of its kind conducted in a large scale thermal-hydraulic facility.

• Composites Research
• /
• v.30 no.5
• /
• pp.288-296
• /
• 2017

The focus of this study is to experimentally investigate the heat dissipation characteristics of poly (methyl methacrylate) (PMMA) composite films with phase change materials (PCM) to resolve heat build-up problems encountered in various electronic devices. In this study, two different types of phase change materials were used to fabricate the composite films by compression molding method and PCM paste sealing method then compared. It was observed in this study that the heat dissipation capability of PCM/PMMA composite films was remarkably enhanced by applying graphite sheet or graphene film into the composite due to their high thermal conductivity. These PCM/ PMMA composite films were attached on the hot spot inside smart phone and tested its surface temperature change according to time. The heat dissipation capability of PCM/PMMA composite film incorporated smart phone was increased 154% and hybrid PCM/PMMA composite film incorporated smart phone was increased 286% over the reference, respectively.

• Textile Coloration and Finishing
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2017

Blended knit with two or more fiber has various dyeing characteristics depending on dyeing method because of different material properties of them. In this paper, newly developed blended knit was used. It was composed by Acrylate fiber and Dyeable polypropylene(DPP) fiber. As result of build-up dyeing test, acid dyes and disperse dyes respectively had good dyeabilities on 1% o.w.f. with Acrylate fiber and DPP fiber. Compatibility of trichromatic of disperse dyes was generally good for most dyes investigated and their critical absorption range were between $120^{\circ}C$ and $130^{\circ}C$. As depending on dyeing methods, there were many differences in dyeability. It was confirmed that 1-bath-1-step dyeing was most suitable when considering dye exhaustion yield and levelling property. Wash, rubbing and light fastness of knits were generally good in most dyes.

• Herbal Formula Science
• /
• v.25 no.2
• /
• pp.253-270
• /
• 2017

Ojectives : To indicate source of prescriptions in "Wenbingtiaobian" and draw pathologic consideration for differences between prescription and source. Methods : Analysed cause and mechanism of disease, pattern identification, treatment, prescriptions and medicinal herbs based on "Translation of Wenbingtiaobian", "Modern Shanhanlun", "Jinkuiyaolueyishi", "Medical collection of Yetianshi" and "Herbal Formula Science". Results : 64.5% of prescriptions in "Wenbingtiaobian" are derived from "Linzhengzhinanyian", "shanghanlun" or "Jinkuiyaolue". Prescriptions from "shanghanlun" or "Jinkuiyaolue" have been modified to fit for heat pattern differentiations, to expand or reduce their medicinal scope, to build up efficacy by adding cold herbs, herbs of nourishing yin, engendering fluid or outthrusting through the exterior, to diffuse water-dampness or warm yang by adding warm herbs. Prescriptions from "Linzhengzhinanyian" have been modified to eliminate cold-dampness, disperse and outthrust with lightness, tonify yin. Conclusions : Wenbingtiaobian" inherited "Linzhengzhinanyian", "shanghanlun" nd "Jinkuiyaolue" andchanged and developed them to cure the febrile disease in the aspect of prescription, mechanism of disease, pattern differentiation and treatment.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.2
• /
• pp.178-183
• /
• 2011

Metal hydride alloys are a promising type of material in hydrogen storage applications, allowing for low-pressure, high-density storage. However, while many studies are being performed on enhancing the hydrogen storage properties of such alloys, there has been little research on large-scale storage vessels which make use of the alloys. In particular, large-scale, high-density storage devices must make allowances for the inevitable generation or absorption of heat during use, which may negatively impact functioning properties of the alloys. In this study, we develop a numerical model of the discharge properties of a high-density MH hydrogen storage device. Discharge behavior for a pilot system is observed in terms of temperature and hydrogen flow rates. These results are then used to build a numerical model and verify its calculated predictions. The proposed model may be applied to scaled-up applications of the device, as well as for analyses to enhance future device designs.