• 제목/요약/키워드: Heat Treatment T6

검색결과 291건 처리시간 0.029초

Hot wall Epitaxy(HWE)법에 의한 $AgInS_2$단결정 박막 성장과 열처리 효과 (The effect of thermal annealing and growth of $AgInS_2$/GaAs single crystal thin film by hot wal epitaxy)

  • Hong, Kwang-Joon
    • 한국결정성장학회지
    • /
    • 제11권6호
    • /
    • pp.274-284
    • /
    • 2001
  • A stoichimetric mixture of evaporating materials for $AgInS_2$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films. $AgInS_2$mixed crystal was deposited on thorughly etched semi-insulating GaAs(100) substrate by the Hot wall Epitaxy (HWE) system. The source and substrate temperatures were $680^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single thin films was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility of $AgInS_2$ single crystal the films measured from Hall effect by van der Pauw method are $9.35\times 10^{16}/\terxtm{cm}^3$ and $294\terxtm{cm}^2$/V.s at 293 K, respectively. From the optical absorption measurement the temperature dependence of the energy band gap on AgInS$_2$ single crystal thin film was found to be $E_g$(T)= 2.1365eV-($9.89\times 10^{-3}eV/T^2$/(2930+T). After the as-grown $AgInS_2$ single crystal thin films was annealed in $Ag^-S^-$ and In-atmospheres, the origin of point defects of AgInS$_2$ single crystal the films has been investigated by using the photoluminescence(PL) at 10K. The native defects of $V_{Ag},V_s, Ag_{int}$ and $S_{int}$ int/ obtained from PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the S-atmosphere converted $AgInS_2$ single crystal thin films to an optical p-type. Also, we confirmed that In in $AgInS_2$ /GaAs did not form the native defects because In is $AgInS_2$ single crystal thin films did exist in the form of stable bonds.

  • PDF

곁사슬에 모노-아조벤젠기를 갖는 비선형 광학 폴리퀴논디이민의 합성과 성질에 관한 연구 (The Synthesis and Properties of Nonlinear Optical Polyquinonediimine Containing Mono-Azobenzene Group in the Side Chain)

  • 이상배;양정성;박동규
    • 폴리머
    • /
    • 제24권6호
    • /
    • pp.737-743
    • /
    • 2000
  • 본 연구에서는 곁사슬에 mono-azobenzene 그룹을 갖는 polyquinonediimine (PQDI)을 TiCl$_4$ 존재 하에서 축합 중합법으로 합성하였다. 합성된 단량체와 고분자는 FT-IR과 $^1$H-NMR로 확인하였으며, 특히 적외선 스펙트럼에 의하여 고분자의 특성 피크인 1625$cm^{-1}$ / 부근에서 >C=N 이중결합이 형성되었음을 보여 주었다. Mono-azobenzene이 양쪽 측쇄에 붙어있는 PQDI는 유전상수가 작은 극성용매에는 극히 부분적으로 용해성을 가졌으며 비극성 용매에는 거의 녹지 않았으나 황산과 $CH_3$SO$_3$H와 같은 강산에는 좋은 용해성을 보여주었다. GPC에 의한 분자량 분포는 1.74로 제법 넓은 분포를 가졌고, X-ray분석으로부터 날은 각도의 영역에서 부분적 결정성을 보였으며, 1$25^{\circ}C$로 열처리 후에는 무정형 고분자임을 확인하였다. 고분자의 열 분석에 의하면, TGA측정에서는 308$^{\circ}C$에서 분해온도가 나타나므로 열적으로 안정한 고분자임을 알 수 있으며, DSC에 의한 T$_{g}$ 값은 1$25^{\circ}C$이었고, mono-azobenzene이 유도체로 결합된 PQDI를 이 온도에서 분극 처리시킨 NLO-active한 PQDI의 SHG값은 8.6 pm/V 값을 가졌고, 경시 안정성의 측정 결과 초기 상태에서는 서서히 감소하는 경향을 보이나 100시간 후에는 안정성을 나타내었다.

  • PDF

열화학적 방법에 의한 산소센서용 세리아 나노분말 합성 (Synthesis of Nanostructured Ceria Powders for an Oxygen-sensor by Thermochemical Process)

  • 이동원;최준환;임태수;김용진
    • 한국분말재료학회지
    • /
    • 제13권3호
    • /
    • pp.192-198
    • /
    • 2006
  • The nanostructured cerium oxide powders were synthesized by spray thermal decomposition process for the use as the raw materials of resistive oxygen sensor. The synthesis routes consisted of 1) spray drying of water based organic solution made from cerium nitrate hydrate ($Ce(NO_3){_3}6H_2O$) and 2) heat treatment of spray dried precursor powders at $400^{\circ}C$ in air atmosphere to remove the volatile components and identically to oxidize the cerium component. The produced powders have shown the loose structure agglomerated with extremely fine cerium oxide particles with about 15 nm and very high specific surface area ($110m^2/g$). The oxygen sensitivity, n ($Log{\propto}Log (P_{O2}/P^o)^{-n}$ and the response time, $t_{90}$ measured at $600^{\circ}C$ in the sample sintered at $1000^{\circ}C$, were about 0.25 and 3 seconds, respectively, which had much higher performances than those known in micron or $100{\sim}200nm$ sized sensors.

API-581에 의한 정량적 위험기반검사에서 취성파괴에 의한 사고발생 가능성 해석 (Analysis of Likelihood of Failure for the Brittle Fracture through Quantitative Risk Based Inspection using API-581)

  • 김태옥;이헌창;장서일
    • 한국가스학회지
    • /
    • 제10권1호
    • /
    • pp.1-6
    • /
    • 2006
  • 압력설비를 안전하고 효율적으로 사용하기 위하여 본 연구에서는 API-581 절차에 의한 위험기반검사에서 취성파괴에 의한 사고발생 가능성을 정량적으로 해석하였다. 그 결과, 낮은 온도/낮은 인성파괴와 뜨임취성에서는 A 충격곡선이고. 낮은 온도와 열처리 전인 상태에서 기술종속계수(TMSF)가 큰 값을 나타내었고, $855^{\circ}F$ 취성에서는 위험도가 무시할 수 있었으나, 시그마상 취성에서는 낮은 온도의 고 시그마인 경우에 TMSF가 큰 값을 나타내어 사고발생 가능성이 매우 높았다.

  • PDF

자동차휠용 A356 알루미늄 합금의 주조조직이 피로특성에 미치는 영향 (Effect of Cast Microstructure on Fatigue Behaviors of A356 Aluminum Alloy for Automotive Wheel)

  • 송전영;박중철;안용식
    • 한국주조공학회지
    • /
    • 제30권1호
    • /
    • pp.46-51
    • /
    • 2010
  • Recently, automotive industry is attempting to replace steels for automotive parts with light-weight alloys such as aluminum alloy, because of the growing environmental regulations governing exhaust gas and the engine effectiveness of a vehicle. The low cycle fatigue (LCF) and high cycle fatigue (HCF) properties as well as the microstructure and tensile property were investigated on the low pressure cast A356 aluminum alloy wheel, which was followed by T6 heat treatment. The cast microstructure of the alloy influenced significantly on the low cycle and high cycle fatigue behaviors. The rim part of cast aluminum alloy wheel showed higher low cycle and high cycle fatigue strength compared with the spoke part, which should be caused by higher cooling rate of rim part. The spoke part of the wheel showed coarser dendrite arm spacing (DAS) and wide eutectic zone in the microstructure, which resulted in the partial brittle fracture and lower fatigue life time.

중력주조 AM60 마그네슘 합금의 강화 거동에 미치는 Si 및 Ca 첨가영향 (Effect of Si and Ca Addition on the Strengthening Behavior of Gravity-cast AM60 Magnesium Alloys)

  • 김재우;김도향;신광선
    • 한국주조공학회지
    • /
    • 제18권4호
    • /
    • pp.364-372
    • /
    • 1998
  • Effects of Si and Ca additions on the mechanical properties of AM60 based Mg alloys have been investigated. Hardness of the AM60 based Mg alloys reached a maximum value after aging for approximately 33 hours but the amount of hardness increase was negligible. The poor age hardening response of the alloys was due to low Al content, which implies that Al content must be >6 wt.% to observe age hardening effect. The tensile and yield strength increased with increasing Al, Si, and Ca content but elongation decreased with increasing Al and Si content. The best mechanical properties obtained in AM 40-2.5Si-0.2Ca alloy after T4 heat treatment were as follows; tensile strength 193.4 MPa, yield strength 79.2 MPa, and elongation 11.2%. High temperature property obtained from creep test was also improved by introducing $Mg_2Si$ which has high hardness, high melting temperature and low thermal expansion coefficient.

  • PDF

동의보감(東醫寶鑑) 중(中) 백지(白芷)가 주약(主藥)으로 배오(配伍)된 방제(方劑)의 활용(活用)에 대한 고찰(考察) (A study on Applications of prescriptions including Radix Angelicae Dahuricae as a main component in Donguibogam)

  • 이성준;장선일;윤용갑
    • 대한한의학방제학회지
    • /
    • 제15권2호
    • /
    • pp.47-64
    • /
    • 2007
  • This report describes 94 prescriptions related to the use of Radix Angelicae Dahuricae main bl ended from Donguibogam. The following conclusions were reached through investigations on the prescriptions that use Radix Angelicae Dahuricae as a key component. 11.7% of wind. 10.6% of carbuncle and deep-rooted carbuncle. recorded the largest number of clinical frequency of the prescriptions in therapeutic use when Radix Angelicae Dahuricae was ta ken as a monarch drug in prescriptions, Prescriptions that utilize Radix Angelicae Dahuricae as t he main component are used in the treatment of apoplexy and carbuncle and deep-rooted carbuncle. headache. wound and they are also used for treating 26 different types of diseases. The prescriptions are compounded with Radix Angelicae Dahuricae as a monarch drug can ap ply to apoplexy, exogenous febrile disease, invasion by wind. wind-cold pathogen, wind-heat path ogen. epidemic disease, pestilence. bruise, bites, deficiency of liver and kidney, deficiency, phlegm-fire, phlegm-heat. The dosage of Radix Angelicae Dahuricae is 0.37g to 7.5g, however 3.75g has be en taken the most for clinical application. The function of Radix Angelicae Dahuricae is to expelling Wind and relieving pain, to expelling wound and forming muscle. to astrict and neutralizing poison. to expelling wind and to getting through body hole. to emit and relieving pain from the combination of drugs and prescriptions.

  • PDF

동피복 YBCO 후막에서 $YBa_2Cu_3O_{7-x}$(Y123) 및 CuO상의 형성 기구 (The Formation of $YBa_2Cu_3O_{7-x}$(Y123) and CuO Phases in Cu-sheath YBCO Thick Films)

  • 김경진;한상철;한영희;정년호;윤희중;오제명;최희락;성태현
    • Progress in Superconductivity
    • /
    • 제6권2호
    • /
    • pp.129-132
    • /
    • 2005
  • The formation behavior of $YBa_2Cu_3O_{7-x}$(Y123) and CuO phases in the heat-treated Cu-sheathed YBCO thick films was studied. The thick films were prepared by screen-printing method using $BaCO_3$ and Y211 powders on Cu tapes. The screen-printed thick films were placed at the center of the tube furnace, heated to $930^{\circ}C$ in air atmosphere and then maintained at the temperature for 60 sec - 300 sec. The microstructure and phases formed in the thick films were investigated by using optical microscope, X-ray diffraction (XRD) and SEM image analysis. During the heat treatment, partial melting occurred rapidly in the printed layers by peritectic reaction between CuO and precursor powders, and then YBCO superconducting phases nucleated from the Cu tapes and grew in a form of thick films.

  • PDF

Effect of Cu-Additions on the Hand-Over Layer of an Aluminum Alloy - Hardening for the Top Ring Groove of Automotive Piston by the Plasma Transferred Arc Welding Process -

  • Moon, J.H.;Seo, C.J.;Hwang, S.H.
    • International Journal of Korean Welding Society
    • /
    • 제1권1호
    • /
    • pp.58-62
    • /
    • 2001
  • The surface of AC8A Ah alloy was modified by adding the Cu powder using a Plasma Transferred Arc (PTA) welding process. Under the optimum fabricating conditions, the modified surface of AC8A Ah alloy was observed to possess the sound microstructure with a minimum porosity. Hardness and wear resistance properties of the as-fabricated alloy were compared with those of the 76 heat-treated one. In case of the as-fabricated alloy, the hardness of the modified layer was twice that of the matrix region. Although significant increase in the hardness of the matrix region was observed after T6 heat treatment, the hardness of the modified layer was not observed to change. The wear resistance of the modified layer was significantly increased compared to that of the matrix region. The microstructure of a weld zone and the matrix region were investigated using the optical microscope, scanning electron microscope (SEM), electron probe microanalysis (EPMA), and transmission electron microscope (TEM). The primary and eutectic silicon in the weld zone were finer and more curved than in the matrix region, while some precipitates has had been found therein. According to the TEM observation, the predominant precipitate present in the weld zone was the $\theta$'phase, which is precipitated during cooling by rapid solidification in PTA welding process. Improvement of hardness and wear properties in the weld zone in the as-fabricated condition can be explained based on the presence of $\theta$’precipitates and fine primary and eutectic silicon distribution.

  • PDF

황제내경(黃帝內經)에 보이는 한(汗)관련 서술(敍述)의 특징(特徵)에 대한 고찰(考察) (A Study on the Characteristics of Descriptions of the Perspiration in "Hwangjenaegyeong(黃帝內經)")

  • 유정아;장우창;백유상;정창현
    • 대한한의학원전학회지
    • /
    • 제23권2호
    • /
    • pp.205-223
    • /
    • 2010
  • In Korean Traditional Medicine(abbreviated to K.T.M.), hyperhidrosis and anhidrosis are the targets of the medical treatment. Furthermore sweating appearance is also one of the important symptoms which explain a particular situation of the patient in K.T.M. And at "Sanghanron(傷寒論)" which is a traditional chief clinical bible written by Jang Gi(張機) later Han dynasty(漢代) in China made full use of the various kinds of diaphoresis[汗法] as a main medical treatment with purgation therapy[下法] and emetic therapy[吐法]. So the sweat in itself not only is the disease, but also is one of the symptoms explain a disease pattern. This thesis inquires into "Hwangjenaegyeong(黃帝內經)" referring to sweat which is the origin of recognition to the sweat in K.T.M. Some theses similar to this research had been made progresses and already reported, but most of them have classified the contents into biology, pathology, diagnosis, treatment after the model of western medical theory. In the aspect of comparative studying with other literature and clinic practical using, we found characteristics of referring to sweat in "Hwangjenaegyeong(黃帝內經)". And we classify the characteristics into some categories as follows. 1. There are some terms which make a title including sweat and symbolize the characteristics, for example sweat of soul[魄汗], sweat of death[絶汗], sweat of streaming[灌汗], sweat of weakness[白汗], sweat of sleep[寢汗], sweat of bright and heat[炅汗], sweat of kidney[腎汗], sweat of escaping[漉汗], cold sweat[寒汗], sweat on the head[頭汗], hyperhidrosis[多汗], heavy sweat[大汗]. But there aren't spontaneous sweat[自汗] or sweat like a thief[盜汗] which are the normal terms referring to sweat in history of K.T.M. And there are several descriptions about sweat appearance such as sweating in half of body[汗出偏沮], sweating in the rear end and thigh and knee[汗出尻陰股膝], hyperhidrosis in the neck and aversion to wind[頸多汗惡風], hyperhidrosis in the head and face and aversion to wind[頭面多汗惡風], cannot stopping the sweating under head[頭以下汗出不可止], make a person sweat to one's feet[令汗出至足], sweating like escaping[漯漯然汗出], sweating like soaking[汗出如浴], sweating become moist[汗出溱溱], hardly escaping sweat[汗大泄], escaping sweating[漉漉之汗], sweat moisten the pores [汗濡玄府], ceaseless sweating like pouring[汗注不休] sweating like pouring and vexation[汗注煩心], damp with sweat[汗汗然], sweating spontaneously[汗且自出], removal of fever with sweat drying[熱去汗稀]. That can be divided into sweat region and sweat form. 2. There are detailed explanations of the principle of perspirations caused by hot weather, hot food, hard working and meeting damp pathogen. 3. There are some explanations of the principle of removing fever due to the excessive heat from internal and external body through sweating by replenishing the body fluid. And many descriptions about overcoming the febrile disease by dropping temperature through sweating and many diaphoresis for curing. 4. There are some descriptions about five Jang organs perspirations and attachment of five mucous body fluid to five Jang organs. 5. There are pathogenic progresses after sweating affected by the Six Atmospheric Influences and water. And detailed explanations of disease mechanism a sweat leading to another disease. 6. There are descriptions about various sweat absent situations.