• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.358-363
• /
• 1995

A study on passive cooling systems for concrete containment of advanced pressurized water reactors has been performed. The proposed passive containment cooling system (PCCS) consist of (1) condenser units located inside containment, (2) a steam condensing pool outside containment at higher elevation, and (3) downcommer/riser piping systems which provide coolant flow paths. During an accident causing high containment pressure and temperature, the steam/air mixture in containment is condensed on the outer surface of condenser tubes transferring the heat to coolant flowing inside tubes. The coolant transfers the heat to the steam condensing pool via natural circulation due to density difference. This PCCS has the following characteristic: (1) applicable to concrete containment system, (2) no limitation in plant capacity expansion, (3) efficient steam condensing mechanism (dropwise or film condensation at the surface of condenser tube), and (4) utilization of a fully passive mechanism. A preliminary conceptual design work has been done based on steady-state assumptions to determine important design parameter including the elevation of components and required heat transfer area of the condenser tube. Assuming a decay power level of 2%, the required heat transfer area for 1,000MWe plant is assessed to be about 2,000 ㎡ (equivalent to 1,600 of 10 m-long, 4-cm-OD tubes) with the relative elevation difference of 38 m between the condenser and steam condensing pool and the riser diameter of 0.62 m.

• 한국정보통신학회논문지
• /
• 제19권9호
• /
• pp.2087-2092
• /
• 2015

산업이 발전함에 따라 제조업 및 서비스 제품 등 다양한 분야에 열전달 장치 및 열전달 시스템이 활용되고 있다. 열전달 시스템의 자동화 및 모니터링 시스템을 통하여 환경을 관리하기 위해서는 온도 측정이 필요한 대상물의 직접적인 온도 및 측정 대상물의 주위 온도에 대한 계측이 필수요소라 할 수 있다. 특히, 이러한 온도 측정에 관한 두 가지 요소에 대하여 본 논문에서는 비접촉온도센서를 활용하여 온도 계측이 필요한 대상물에 센스를 직접 접촉하지 않고 대상물의 표면 온도를 계측할 수 있는 시스템과 대상물 주위 온도를 계측할 수 있는 모듈을 소형 MCU(microcontroller unit) 기반으로 설계하여 계측된 온도 데이터를 USN(Ubiquitous Sensor Network)기반의 지그비(ZigBee) 통신을 활용하여 온도 모니터링 시스템을 제시하고자 한다. 본 논문에서는 대상물의 온도와 주위 온도에 관한 정보를 계측하기 위하여 비접촉온도센서를 활용하여 대상물의 표면 온도 및 주위 온도를 계측할 수 있는 펌웨어 기반의 시스템을 설계하였다. 또한, 계측된 온도 정보 데이터를 지그비 통신을 기반으로 원격으로 온도 데이터를 모니터링 할 수 있는 시스템을 제시하고자 한다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 춘계학술발표회논문집(2)
• /
• pp.643-650
• /
• 1995

A numerical method for treating transient diffusion Involving change of phase is presented. In other methods of dealing with this class of problems, the mass flux balance at the moving phase boundary requires explicit treatment of two distinct phases. The technique, originating from the apparent heat capacity method in transient heat conduction with the phase change, avoids the difficulty by transferring the concentration discontinuity at the boundary to smoothed physical property variations near the moving front. This technique accomodates the nonlinearities which preclude use of analytical solutions. It was tested against known analytical solutions for simple cases and turned out to be quite accurate.

• 한국발생생물학회지:발생과생식
• /
• 제13권3호
• /
• pp.199-205
• /
• 2009

HSP70 has widely been induced in in vivo hyperthermia conditions in various organisms to study gene regulation and recently neuroprotectve roles of the induced gene expression under varying conditions. We investigated different responses among various tissues in zebrafish under heat shock to evaluate whether spatial and temporal expression pattern of zebrafish (z) hsp70 in transcriptional and translational level under heat shock stress in different brain regions. Heat shock groups were given for 1 h at $37^{\circ}C$ after recovery by transferring the treated animals back to $28^{\circ}C$ for 1, 2 and 24 h for recovery, respectively. Control (CTRL) group was kept at $28^{\circ}C$. At the end of treatments, five animals were collected and used for isolation of total RNAs and peptides from the corresponding tissues. Expression of zhsp70 mRNA showed different patterns in recovery periods in the tissues including the brain, eye, intestines, muscles, heart and testis by RT-PCR. Unlike the RT-PCR analysis, Northern blot analysis demonstrated nearly 30-fold increase in zhsp70 at 1 h heat shock, suggesting that RT-PCR may not be appropriate in unmasking regulation of the time-dependent zhsp70 expression. In the experiment involving different brain regions, the cerebellum showed gradual activation at 1 h to R1h and decreases in R2h and R24h, while the medulla oblongata and optic tectum showed gradual increase at R1h and decrease at R24h, indicating that different brain tissues respond specifically to heat shock in inducing zhsp70 and recovering from the heat shock status. Western blot analysis also demonstrated that the intracellular levels of zHSP70 in three different brain regions including the cerebellum, medulla oblongata and optic tectum are differently induced and recovered to normal state. These results clearly demonstrate that different regions of the body and the brain tissues are responding differently to heat shock in the aspects of its level of expression and speed of recovery.

• 전자공학회논문지SC
• /
• 제46권6호
• /
• pp.50-57
• /
• 2009

본 논문에서는 뜸의 열적 효과를 구현할 수 있는 심부 열 자극 시스템을 제작하고 뜸 자극에 의한 온도변화와 유사한 자극 프로토콜을 설계하고 평가하였다. 뜸은 질병에 대한 면역력을 높이고 질병을 치유하는데 사용하지만, 체표면에 화상을 입히는 부작용 및 열 자극의 세기를 조절하기 힘든 한계점이 있다. 이런 한계점을 극복하기 위해 자극의 세기 조절이 용이한 고주파 심부 열 자극 시스템을 개발하고, 심부에 뜸과 동일한 열 자극을 전달할 수 있는 프로토콜을 제안하여 뜸의 심부온도와 비교 하였다. 심부의 온도측정은 고주파의 영향을 받지 않는 적외선 열 센서를 사용해 측정하였고, 적외선 열 카메라 및 thermometer를 이용해 온도를 측정하고 비교하였다. 뜸과 심부 열 자극 시스템을 이용하여 심부에 자극을 인가한 후 측정한 온도변화를 비교한 결과, 표피에 가까울수록 유사한 온도 변화 패턴을 보여준 반면 심부로 내려갈수록 심부 열 자극 시스템의 열적효과가 뜸에 비해 더 효과적인 것을 알 수 있었다. 이를 통해 제작한 심부 열 자극 시스템과 열 자극 프로토콜의 유용성을 확인 할 수 있었다.

• 소성∙가공
• /
• 제16권8호
• /
• pp.621-628
• /
• 2007

Nowadays, Exhaust Gas Recirculation(EGR) Cooler is one of the most favorite systems for reducing the generation amount of $NO_x$ and other particle materials from vehicles burning diesel as fuel. Efficiency of the system is mainly dependent on its heat transfer efficiency and this ability is affected by net heat transferring area of the system. For that reason, several types of heat transfer tube such as dimple, wrinkle and spiral types that have large net area are used. However, it is difficult to manufacture the rectangular tube with dimpled type structure because it experiences too much strain around the rectangular tube surface during the forming process. For that reason, in this study, numerical simulation for forming process of non-symmetric dimple shape on a thin sheet metal was carried out. Furthermore, theoretical forming limit curves(forming limit diagram, forming limit stress diagram) were proposed as criteria of formability evaluation. From the results of finite element simulation in view of stress and strain distribution, it is found that the designed process has robustness and feasibility to safely manufacture the dimpled rectangular tube.

• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.84-89
• /
• 2009

The turbid/translucent, near colorless(milky) metamorphic sapphire samples from Sri Lanka have been characterized after the heat treatment in $N_2$ at $1650^{\circ}C$. As-received sapphire specimens became bluish-colored and exhibited more clarity after the heat treatment. It was found that the color change at inclusions zoning region is attributed by the dissolution. As received samples contain the micro/nano inclusions such as rutile($TiO_2$), ilmenite($FeTiO_3$), spinel($MgAl_{2}O_{4}$)/ulvospinel($Fe_{2}TiO_{4}$) and apatite($Ca_5(PO_4)_3$), which were dissolved by the heat treatment and form the blue color through $Fe^{2+}/Ti^{4+}$ charge transferring. The microstructures become different because as the dissolution of apatite($Ca_5(PO_4)_3(OH,F,Cl)$) in alumino silicates($Al_{2}SiO_{5}$) occurred, resulting in morphological change with the appearance of(Ca, Mg, Al) silicate on the surface. Both as-received and heat treated samples showed the rhombohedral crystal structure of $Al_{2}O_{3}$.

• 한국통신학회논문지
• /
• 제35권1B호
• /
• pp.62-67
• /
• 2010

본 연구는 다양한 산업 환경에 적용되는 RFID 태그 개발에 있어 RFID 태그 패키징 개발과 RFID 태그 플립칩(flip chip) 접합 방법이 산업 환경 맞춤형 RFID 태그 개발에 미치는 영향에 대해 분석하였다. RFID 태그 플립칩(flip chip) 접합은 와이어 접합(wire bonding), 초음파 접합(ultrasonic bonding), 열융착 접합(heat plate bonding), 레이저 접합(laser bonding)으로 구분되어 있으며, 이런 접합 방법은 다양한 RFID 태그 개발의 적용 환경에 따라 적합한 접합 방법이 있음을 본 연구를 통해서 알 수 있었다. 극고온, 극저온, 다습, 고내구성 등 다양한 산업 환경 중 극고온 환경에서의 RFID 태그 개발은 빛 에너지를 흡수하여 열 에너지로 전환하는 레이저 접합 방법과 직접적인 열 전달 방식인 열융착 접합 방법은 접속 재료인 ACF의 손상으로 인해 부적합하고, 와이어를 이용하여 직접 범프와 패턴을 연결하는 와이어 접합 방법이 적합함을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제33권2호
• /
• pp.153-161
• /
• 2009

Three-dimensional finite-element methods(FEM) have been used to analyze the thermal stress of an exhaust gas recirculation(EGR) cooler due to thermal and pressure load. Since efficiency and capability of the heat exchanger are mainly dependent on net heat transferring area of the EGR cooler system, the tube inside the system has a numerous dimples on the surface. Thus for finite element analysis, firstly the dimple-typed tube is modeled as a plain element without the dimple, and then the equivalent thermal conductivities and elastic modulus are calculated. This work describes the numerical homogenization procedure of the dimple-typed tube and verifies the equivalent material properties by comparison of a single unit and the actual full model. Finally, the homogenization scheme presented in this study can be efficiently applied to finite element analyses for the thermal stress and deformation behavior of the EGR cooler system with the dimple-typed tube.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.87.1-87.1
• /
• 2011

The residential Fuel Cell system has high efficiency of 85% with transferring natural gas to electrical power and heat, directly and it is a friendly environmental new technology in that $CO_2$ emission can reduce 40% compared with conventional power generator and boiler. The residential fuel cell system consists of two main parts which have electrical and hot storage units. The electrical unit contains a fuel processor, a stack, an inverter, a control unit and balance of plant(BOP), and the cogeneration unit has heat exchanger, hot water tank, and auxiliaries. 5kW class fuel process was developed and tested from 2009, it was evaluated for long-term durability and reliability test including with improvement in optimal operation logic. Stack development was crried out through improvement of design and evaluation protocol. Development of system controller was successfully accomplished through strenuous efforts and original control logic was optimized in 5kW class PEMFC system. In addition, we have been focused on development of system process and assembly technology, which bring about excellent improvement of reliability of system. The 5kW class PEMFC system was operated under dynamic conditions for 1,000 hours and it showed a good performance of total efficiency and durability.