• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.278-287
• /
• 2015

PURPOSE. The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS. Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic polyamide resin (Bio Tone), thermoplastic acrylic resin (Acrytone) were used as materials for this study. One hundred five specimens were fabricated. For the color stability test, specimens were immersed in the coffee and green tee for 1 and 8 weeks. Color change was measured by spectrometer. Water sorption was tested after 1 and 8 weeks immersion in the water. For the test of cytotoxicity, cell viability assay was measured and cell attachment was analyzed by FE-SEM. RESULTS. All types of denture base resin showed color changes after 1 and 8 weeks immersion. However, there was no significant difference between denture base resins. All specimens showed significant color changes in the coffee than green tee. In water sorption test, thermoplastic acrylic resin showed lower values than conventional heat-polymerized acrylic resin and thermoplastic polyamide resin. Three types of denture base showed low cytotoxicity in cell viability assay. Thermoplastic acrylic resin showed the similar cell attachment but more stable attachment than conventional heat-polymerized acrylic resin. CONCLUSION. Thermoplastic acrylic resin for the non-metal clasp denture showed acceptable color stability, water sorption and cytotoxicity. To verify the long stability in the mouth, additional in vitro studies are needed.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.41-50
• /
• 2015

Open-loop groundwater heat pump (GWHP) system generally has benefits such as a higher coefficient of performance (COP), lower initial cost, and flexible system size. The hydrogeological conditions in Korea have the potential to facilitate the use of the GWHP system because a large number of monitoring wells show stable groundwater temperatures, shallow water levels, and high well yields. However, few studies have been performed in Korea regarding the GWHP system and the most studies among them dealt with Standing Column Well (SCW). Because the properties of the aquifer have an influence on designing open-loop systems, it is necessary to perform studies on various hydrogeological settings. In this study, the hydrogeological and thermal properties were estimated through various tests in the riverside alluvial layer where a GWHP system was installed. Under different groundwater flow velocities and pumping and injection rates, a sensitivity analysis was performed to evaluate the effect of such properties on the design of open-loop systems. The results showed that hydraulic conductivity and thermal dispersivity of the aquifer are the most sensitive parameters in terms of performance and environmental aspects, and sensitivities of the properties depend on conditions.

• Food Science of Animal Resources
• /
• v.22 no.2
• /
• pp.172-178
• /
• 2002

Vitamins are bio-active materials and essential elements in our body but some of them are very low in milt Various vitamin-fortified milks are developed by the help of milk processing technology. However, heat treatments can affect vitamins contents in milk. Total loss of vitamins during the UBT(ultra high temperature) treatment was investigated. UHT treatment caused 60∼70% loss for vitamin C, and 30∼40% loss for vit. D3 and vit. E which are well-known as heat stable materials. On the contrary, degradation of water-soluble vitamins is relatively very low in the capsule-coated state. The capsule could reduce the loss of vitamins by protecting vitamins from the degradation factors such as heat, oxygen, lights etc. The fortification method using capsule can be thought as a new way to reduce the loss of vitamins during milk processing. Further study about heat treatment time and temperature, and capsule coating and materials will be required to minimize the loss of vitamins in milt.

• Journal of Korea Foundry Society
• /
• v.22 no.2
• /
• pp.69-74
• /
• 2002

The effects of heat treatments and alloying elements on the microstructure and mechanical charaterisitics of specially austempered ADIs containing alloying elements such as Cu, Mo and Ni were investigated. To compare with the effect of conventional and normal(CN) austempering treatment, two kinds of special austempering treatments which are those with pre-quenching and pre-heating were conducted. The hardness and uniaxial fatigue tests were carried out to evaluate the mechanical charateristics. The hardness of ADI treated by CN heat cycles was higher than those of other ADIs. Cu added ADI (Cu-ADI) tempered at 400 after austenitizing exhibited the highest fatigue life cycles. While austempering after prequenching makes the austenite with high carbon stable, which resulted in transformation to highly strengthened bainites from the carbon enriched austenite phases during tempering. The high carbon enriched banites is considered to improve the fatigue strength.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.232-241
• /
• 2016

Installing a ventilator for an apartment house composed of over 100 dwelling units was mandated in 2006 to improve indoor air quality. In the case of mechanical ventilators, the air change rate is kept stable, however 68% of dwellers do not operate their ventilator because of an increased electrical bill and noise. In the case of natural ventilators, the former problems are settled, but there are concerns about cold draught and an increase of heating/cooling cost. Authors are developing a heat recovery type natural ventilator which is a natural ventilator equipped with total heat recovery element, and it is expected that those problems of mechanical ventilator and natural ventilator are resolved by this. The combined type diffuser of this study is an under developed fit to the heat recovery type natural ventilator above. There are no standards to evaluate the performance for this type of diffuser. Due to this issue this study investigated the performance of the ventilation and maintained a thermal environment for the combined type diffuser by comparing it with existing diffusers. The results revealed that the performances of the combined type of diffusers showed different features from the existing ones, and was estimated to be high enough in the performances above.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.6
• /
• pp.808-818
• /
• 2022

In this research paper, we investigated the cryogenic line chill down characteristics of liquefied natural gas (LNG). A numerical analysis model was established and verified so that it can calculate the precise cooling characteristics of cryogenic fluid for the stable and safe utilization especially such as LNG and liquid hydrogen. The numerical modeling was programmed by C++ as an one-dimensional homogeneous model. The thermohydraulic cooling process was simulated using mass, momentum, energy conservation equations and appropriate heat transfer correlations. In this process, the relevant heat transfer correlations for nuclear boiling, transition boiling, film boiling, and single-phase heat transfer that can predict the experimental results were implemented. To verify the numerical modeling, several cryogenic line chill down experiments using LNG were conducted at the Korea Institute of Machinery & Materials (KIMM) LNG and Cryogenic Technology Center.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.5
• /
• pp.449-454
• /
• 1998

A thennostable chitosanase was purified from Bacillus sp. KFB-C108, by fractionation of 30 to 70% saturation with ammonium sulfate, DEAE-Toyopearl chromatography, Butyl-Toyopearl chromatography, and TSK-Gel HW-55F gel filtration. The purified enzyme showed a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis, and the molecular weight was estimated to be 48 kDa. The enzyme degraded soluble chitosan and colloidal chitosan, but did not degrade glycol chitosan, chitin, and the other compounds investigated. There was no effect on the chitosanase activity by treatment with chelating agents, alkylating agents, and various metals investigated, and only cobalt ions inhibited the activity. Optimum temperature and pH were $55^{\circ}C$ and 6.5, respectively. The enzyme was stable after heat treatment at $80^{\circ}C$ for 10 min or $70^{\circ}C$ for 30 min and fairly stable in several organic solvents as well. Chitosan was hydrolyzed to $(GlcN)_4$as a major product by incubation with the enzyme.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.4
• /
• pp.510-517
• /
• 2008

Effects of addition of Chinese chives into frozen noodle on retrogradation of the cooked frozen noodle were examined by enzymatic evaluation during the storage 3 days at $4^{\circ}C$. The retrogradation rate during storage was significantly reduced by addition Chinese chives. Thus we hypothesized that retarogardation and textural changes of frozen noodle might be linked to thermostable amylase in Chinese chives. The amylase isolated from Chinese chives was affected by temperature and pH of buffer used. The enzyme was mainly extracted 20 mM potassium phosphate buffer(pH 7.0). The enzyme was extremly stable at wide temerature and pH. Amylase activity was maximal at $50^{\circ}C$ and pH 7.5. The enzyme was not inactivated by heat treatment at $70^{\circ}C$, $80^{\circ}C$ for 30 min. We suggest the enzyme was stable at high temperature. To investigate the effect of different storage packge on texture properties, color, sensory evaluation, parent-packged and unparent packaged frozen noodle was compared with control. As the storage passed, the frozen noodle packaged with parent showed a rapid decrease in the color. The hardness was gradually decreased during storage. It was found that unparent packged must be nessasry in the Chinese chives frozen noodle. In changes of sensory properties by traind panel, Chinese chives frozen noodle with 2% blanched Chinese chives got the highest score in overall acceptability, therefore we tried acceptance test by consumers with 2% blanched frozen Chinese chives noodle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.220-223
• /
• 1995

Stable polyion-complexed polymeric monolayrers were prepared by spreading perfluoroalkyl monomaleatd copolymers. C$_2$F$\_$8/MA-VE$_2$ and C$_2$F$\_$8/Mv-VE$_3$ on aqueous poly(allylamine) subphase. The monolayer properties have been studied by the surface pressure-area($\pi$-A) isotherms. The C$_2$F$\_$8/MA-VE$_3$containing longer oligoethyleneglycol pendant showed more expaned monolayer phase than the C$_2$F$\_$8/MA-VE$_2$ The polyion-complexed monolayers were transferable on various substrates, and the resulting Langmuir-Blodgett(LB) films were characterized b ET-IR spectroscopy and scanning electron microscopy(SEM) Two-dimensional crosslinking to from a polymer network was achieved by amide formation through heat treatment under vacuum with concurrent removel of perfluoroalkyl tails. SEM observation of this film ona porous membrane filter showed that the four layer film was sufficiently stable to cover the filter pore size of 0.1$\mu\textrm{m}$. The C$_2$F$\_$8/MA-VE$_3$revealed better covering capability than the C$_2$F$\_$8/MA-VE$_2$Immersion of this film in water or in benzend did not cause any change in its appearance and in FT-IR spectra.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1122-1129
• /
• 2001

Underwater wet arc welding process was experimentally investigated by using the six types of flux coated electrodes of 3.2 mm diameter and the KR-RA steel plate of 11 mm thickness as base metal. Two types of electrodes were domestic covered arc welding electrode(CR13, CR14) and another two types of wet welding electrodes(UWCS, TN20)were imported goods, and the other two type (UWX1, UWX2) were individually designed flux coated electrodes for experimental welding purpose. Main experimental results are summerized as follows: 1. It is ascertained that individually designed flux coated electrode(UWX1) could be used in practice with KR-RA steel plate for underwater wet arc bead welds. 2. Welding arc can be generated easily and considerably kept in stable using TN20 and UWX1 electrodes. 3. The micro Vickers hardness value and the portion of martensite in the HAZ were increased in all the electrodes by rapid cooling rate, but it is relatively maintain stable for UWCS, TN20 and UWX1 electrodes.