• 전기화학회지
• /
• 제22권4호
• /
• pp.172-176
• /
• 2019

The first commercialized cathode material, $LiCoO_2$, suffers from disadvantages such as high cost and toxicity and also possesses safety problems. The nickel-rich $LiNi_{0.9}Mn_{0.1}O_2$ cathode material, used as an alternative to $LiCoO_2$, has highly reversible capacity and high energy density. So, the nickel-rich $LiNi_{0.9}Mn_{0.1}O_2$ cathode material is widely used as an alternative to $LiCoO_2$ due to its highly reversible capacity and high energy density. However, $LiNi_{0.9}Mn_{0.1}O_2$ has several disadvantages as well, such as poor cycle performance and poor thermal instability. To address these problems, we synthesized a new material, $LiNi_{0.5}Mn_{0.5}O_2$, as a shell on the surface of a core to suppress the surface degradation. The new material showed high structural and thermal stabilities and could also maintain a high capacity. The capacity retention of the core-shell cathode (87.7%) was better than that of the core cathode (76.9%) after 50 cycles. Analysis using differential scanning calorimetry revealed that the heat generation in the core-shell cathode ($65.9Jg^{-1}$) was lower than that in the core cathode ($559.7Jg^{-1}$).

• 한국추진공학회지
• /
• 제6권4호
• /
• pp.15-23
• /
• 2002

액체 로켓 엔진 메니폴드 및 인젝터 부는 단열 사양을 적용할 경우 시스템이 복잡해지고 무게가 증가함으로 인해 일반적으로 단열 사양이 적용되지 않는다. 단열사양을 적용하지 않을 경우에 일어날 수 있는 문제는 액체산소의 온도 상승과 메니폴드 내부벽 및 인젝터에서 기체가 발생할 수 있다는 점이다. 본 연구에서는 극저온 액체산소를 산화제로 사용하는 KSR-III 액체로켓 엔진의 산화제 메니폴드 및 인젝터에서 측정된 압력 강하 값을 이용하여 발생된 기체 분율을 계산하였다. 액체산소 메니폴드 기체 분율 계산은 이상유동의 분리유동 모델을 활용하였고. 인젝터에서의 기체분율은 오리피스 모델을 활용하여 예측하였다. 이와 함께 메니폴드 열해석을 수행하여 비등현상에 대한 유동형태를 파악하였다. 또한 액체로켓 엔진내에서의 기체 발생이 로켓 엔진의 성능 및 연소 안정성에 미치는 영향에 대하여 간략히 고찰하였다.

• Elastomers and Composites
• /
• 제35권3호
• /
• pp.205-214
• /
• 2000

TDI에 PPG 3000을 기재로 사용하고 PPG 400, PPG 1000, PPG 2000을 $0{\sim}50%$ 혼합 사용하여 프리폴리머형 폴리우레탄수지를 합성한 후 합성 내용을 분석하고 합성물의 물성을 조사하였다. 반응은 촉매를 합성 초기에 넣었을 때에는 글리콜이 TDI 적하시에 대부분 반응되어 점도의 급상승이 일어나 불안하였지만 $40^{\circ}C$에서 무촉매 상태로 TDI를 적하시킨 후 $60^{\circ}C$ 승온 후에 촉매를 넣었을 때에는 매우 안정하였다. 인산을 사용하면 $40^{\circ}C$에서 부반응이 억제되어 점도는 낮아지지만 경화반응시 입체적으로 가교되지 못해 가교속도는 느리게 나타났다. 경화속도는 NCO/OH의 비보다는 분자의 입체적 구조에 더 영향을 받았다. 접착력은 글리콜 성분 중에 PPG 400을 적어도 30%(wt.%) 이상 사용하였을 때 PPG 400에 의한 가교밀도 상승으로 보다 우수한 물성을 나타내었다.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.874-879
• /
• 1995

고 포화자속밀도를 갖는 Fe미세결정 박막의 자기특성 및 미세구조에 미치는 첨가원소의 영향을 조사하였다. Mo 첨가 박막의 경우, $Fe_{2}Mo$, $Fe_{4}N$, $Fe_{3-2}N$상의 생성으로 연자기 특성이 발현되지 않았다. Ta첨가 박막의 경우, 미세한 TaN, TaC 상이 석출하여 $\alpha$-Fe 결정립을 효과적으로 미세화 시켰으며 Fe 질화물의 생성도 억제되었다. 이에 따라 우수한 연자기 특성이 발현되었으며 FeTaN계 박막은 4000, FeTaC 박막은 2700의 높은 투자율을 나타내었다.

• 암석학회지
• /
• 제1권2호
• /
• pp.91-103
• /
• 1992

Eruptive mechanisms and processes at Udo tuff cone can be inferred from indicative characters of products, bedforms and lithofacies, and ring faults. In terms of bedforms and lithofa-cies in particular, massive lapilli tuff beds and chaotic lapilli tuff beds are derived from subaerial falls of aggregated tephra of wet tephra finger jets, occurring dominantly at the lower sequences of proximal part at the tuff cone. Crudely stratified lapilli tuff are derived from subaerial falls of slightly aggregated tephra of less wet tephra finger jets, whereas reversely graded lapilli tuff beds are from slightly disaggregated subaerial falls of continuous uprush. Both beds frequently occur in the middle sequences at proximal and near medial part of the tuff cone. Block and lapilli tephra lenses, ash-coated lapilli tephra beds(lenses) and thin-bedded tuff beds are derived from extremely disaggregated subaerial falls of dry tephra in the continuous uprush, frequently occurring at the upper sequences of medial part at the tuff cone. Udo tuff cone is a basaltic volcano emergent through the sea water surface while water could flood across or into the vent area. Emergence of the tuff cone was from the type-Surtseyan eruption characterized by earlier tephra finger jets and later continuous uprush columns of tephra with copious volumes of steam. Explosions began when boiling of wter produced a bubble column reducing the hydrostatic pres-sure, allowing exsolution of gases from the magma. This expansion of magma into a vesiculating froth fragmented the magma and permitted mixing of magma and water so that a more vigorous generation of steam could proceed. Tephra finger jetting explosions continued to build the crater rims, then remove water from the vent that their deposits flowed like slsurries until the continuous uprush explosion ensued. Continuous uprush explosions were associated with most rapid accumula-tion of tephra. The increasing volume rate led to partial removal of water from the vent area by the newly tephra ring so that more vigorous activity could be attended by a reducing water supply. This might restrain surplus of cold water entering the vent and thus enhance the vigour of the eruption by allowing optimal heat exchange. Eventually the crater became so deep and unsuported that piecemeal sliding, or massive subsidence on indipping ring faults, filled and closed the vent, and the cycle of explosions and collapse began anew.

• 자원리싸이클링
• /
• 제28권1호
• /
• pp.3-14
• /
• 2019

구리는 뛰어난 전기전도성 및 열전달 특성으로 인해 많은 전자기기 및 건축 부품에 활용되고 있고 니켈 등 다른 도금의 밑 도금으로 사용되는 등 현대 산업에서 필수적으로 사용되는 소재이다. 뿐만 아니라 차세대 산업군에서 배선, 센서, 데이터 장비의 사용량과 중요도가 더욱 커지면서 그 활용도가 더욱 커질 것으로 예상됨에도 불구하고 유럽발 경제위기, 중국 경제 저성장 기조, 트럼프 대통령의 공공 산업설비 투자 공약 등에 따라 가격이 급동하는 추세를 보여 안정적인 수급 확보 및 자원관리에 어려움을 겪는 실정이다. 국내 구리 사용량의 거의 대부분을 전기동을 이용하여 사용하기 때문에 본 연구에서는 상용화 되고 있는 구리 재활용 기술과 연구 단계에 머물고 있는 구리 재활용 기술을 구분하여 각각의 기술적 수준을 파악하였다. 이를 통해 각 공정별 특징과 향후 기술개발이 요구되는 분야를 고찰해 보고자 하였다.

• 한국수소및신에너지학회논문집
• /
• 제30권4호
• /
• pp.303-311
• /
• 2019

Reversible solid oxide fuel cell (RSOFC) has become a prospective device for energy storage and hydrogen production. Many studies have been conducted around the world focusing on system efficiency improvement and realization. The system should have not only high efficiency but also a certain level of simplicity for stable operation. External waste steam utilization was proved to remarkably increase the efficiency at solid oxide electrolysis system. In this study, RSOFC system coupled with waste steam was proposed and optimized in term of simplicity and efficiency. Ejector for fuel recirculation is selected due to its simple design and high stability. Three system configurations using ejector for fuel recirculation were investigated for performance of design condition. In parametric study, the system efficiencies at different current density were analyzed. The system configurations were simulated using validated lumped model in EBSILON(R) program. The system components, balance of plants, were designed to work in both electrolysis and fuel cell modes, and their off-design characteristics were taken into account. The base case calculation shows that, the system with suction pump results in slightly lower efficiency but stack can be operated more stable with same inlet pressure of fuel and air electrode.

• 플랜트 저널
• /
• 제14권4호
• /
• pp.48-54
• /
• 2018

발전설비에서의 질소산화물 배출 규제치가 강화됨에 따라 1990년대에 설치된 HRSG도 탈질설비를 추가로 설치해야 하는 상황이 되었다. 그러나 HRSG 내부에 촉매와 암모니아 분사장치 모두를 설치할 수 있는 공간이 없기 때문에 그 대안으로써 HRSG 내부에는 촉매만 설치하고 암모니아 분사장치는 가스터빈 배기덕트로 변동하여 설치하는 것을 검토하였다. 본 연구에서는 인천복합발전소를 대상으로, 암모니아 분사장치를 HRSG 중압 과열기 후단과 가스터빈 배기덕트에 설치하여 암모니아를 분사였을 때 대기 배출기준 8.5 ppm을 만족하는 암모니아 소비량을 각각 측정하였다. 연구결과 가스터빈 배기덕트 암모니아 분사방식이 HRSG 중압 과열기 후단 분사방식에 비해 소비량이 1.2배 정도 증가한 것으로 나타났다. 따라서 HRSG 수명 30년 운영을 고려한다면 HRSG 내부에 암모니아 분사장치를 설치할 수 없는 경우 가스터빈 배기덕트에 암모니아 분사장치를 설치하는 것이 추천된다.

• 한국분말재료학회지
• /
• 제27권6호
• /
• pp.490-497
• /
• 2020

The 3D printing process provides a higher degree of freedom when designing ceramic parts than the conventional press forming process. However, the generation and growth of the microcracks induced during heat treatment is thought to be due to the occurrence of local tensile stress caused by the thermal decomposition of the binder inside the green body. In this study, an alumina columnar specimen, which is a representative ceramic material, is fabricated using the digital light process (DLP) 3D printing method. DTG analysis is performed to investigate the cause of the occurrence of microcracks by analyzing the debinding process in which microcracks are mainly generated. HDDA of epoxy acrylates, which is the main binder, rapidly debinded in the range of 200 to 500℃, and microcracks are observed because of real-time microscopic image observation. For mitigating the rapid debinding process of HDDA, other types of acrylates PETA, PUA, and MMA are added, and the effect of these additives on the debinding rate is investigated. By analyzing the DTG in the 25 to 300℃ region, it is confirmed that the PETA monomer and the PUA monomer can suppress the rapid decomposition rate of HDDA in this temperature range.

• Current Optics and Photonics
• /
• 제6권6호
• /
• pp.521-549
• /
• 2022

Fiber lasers have made remarkable progress over the past three decades, and they now serve far-reaching applications and have even become indispensable in many technology sectors. As there is an insatiable appetite for improved performance, whether relating to enhanced spatio-temporal stability, spectral and noise characteristics, or ever-higher power and brightness, thermal management in these systems becomes increasingly critical. Active convective cooling, such as through flowing water, while highly effective, has its own set of drawbacks and limitations. To overcome them, other synergistic approaches are being adopted that mitigate the sources of heating at their roots, including the quantum defect, concentration quenching, and impurity absorption. Here, these optical methods for thermal management are briefly reviewed and discussed. Their main philosophy is to carefully select both the lasing and pumping wavelengths to moderate, and sometimes reverse, the amount of heat that is generated inside the laser gain medium. First, the sources of heating in fiber lasers are discussed and placed in the context of modern fiber fabrication methods. Next, common methods to measure the temperature of active fibers during laser operation are outlined. Approaches to reduce the quantum defect, including tandem-pumped and short-wavelength lasers, are then reviewed. Finally, newer approaches that annihilate phonons and actually cool the fiber laser below ambient, including radiation-balanced and excitation-balanced fiber lasers, are examined. These solutions, and others yet undetermined, especially the latter, may prove to be a driving force behind a next generation of ultra-high-power and/or ultra-stable laser systems.