• Carbon letters
• /
• 제5권1호
• /
• pp.6-11
• /
• 2004

In spite of unparalleled combination of essential material properties for brake linings and clutch facings, replacement for asbestos is seriously called for since it is a health hazard. Once asbestos is replaced with other material then composition and properties of brake pad changes. In certain cases hardness of the material may be high enough to affect the rotor material. In this study, hardness of the brake pad has been controlled using suitable reinforcement materials like glass, carbon and Kevlar pulp. Brake pad formulations were made using CNSL (cashew net shell liquid) modified phenolic resin as a binder, graphite or cashew dust as a friction modifier and barium sulphate, talc and wollastonite as fillers. Influence of each component on the hardness value has been studied and a proper formulation has been arrived at to obtain hardness values around 35 on Scleroscopic scale. Friction and wear properties of the respective brake pad materials have been measured on a dynamometer and their performance was evaluated.

• Structural Engineering and Mechanics
• /
• 제27권3호
• /
• pp.347-363
• /
• 2007

Assessment of structural behaviour of corrosion affected structures is an important issue, which would help in making certain decisions pertaining to the inspection, repair, strengthening, replacement and demolition of such structures. The paper presents formulations to predict the loss of weight and the loss of cross-sectional area of the reinforcing bar undergoing corrosion based on the earlier study carried out by the present authors (Bhargava et al. 2006). These formulations have further been used to analytically evaluate the ultimate bending moment and ultimate shear force capacity of the corroded concrete beams. Results of the present study indicate that, a considerably good agreement has been observed between the experimental and the analytically predicted values for the weight loss and reduction in radius of the corroded reinforcing bars. A considerably good agreement has also been observed between the experimental and the analytically predicted values of ultimate bending moment and ultimate shear force capacity for the corroded concrete beams.

• Smart Structures and Systems
• /
• 제22권6호
• /
• pp.711-725
• /
• 2018

Most of the practical engineering structures exhibit nonlinearity due to nonlinear dynamic characteristics of structural joints, nonlinear boundary conditions and nonlinear material properties. Hence, it is highly desirable to detect and characterize the nonlinearity present in the system in order to assess the true behaviour of the structural system. Further, these identified nonlinear features can be effectively used for damage diagnosis during structural health monitoring. In this paper, we focus on the detection of the nonlinearity present in the system by confining our discussion to only a few selective time-frequency analysis and multivariate analysis based techniques. Both damage induced nonlinearity and inherent structural nonlinearity in healthy systems are considered. The strengths and weakness of various techniques for nonlinear detection are investigated through numerically simulated two different classes of nonlinear problems. These numerical results are complemented with the experimental data to demonstrate its suitability to the practical problems.

• Kyungpook Mathematical Journal
• /
• 제64권1호
• /
• pp.69-94
• /
• 2024

In this paper, we introduce an inertial self-adaptive projection method using Bregman distance techniques for solving pseudomonotone equilibrium problems in reflexive Banach spaces. The algorithm requires only one projection onto the feasible set without any Lipschitz-like condition on the bifunction. Using this method, a strong convergence theorem is proved under some mild conditions. Furthermore, we include numerical experiments to illustrate the behaviour of the new algorithm with respect to the Bregman function and other algorithms in the literature.

• 디지털융복합연구
• /
• 제10권6호
• /
• pp.349-359
• /
• 2012

본 연구에서는 현재 우리나라의 지적장애인 대상의 디지털 성교육 콘텐츠 프로그램과 현황을 살펴보고, 이에 따른 디지털 성교육 콘텐츠 구성에 대한 연령별 제안과 피셔의 성교육에 관한 정보 동기 행동 스킬 모형을 인적자원 개발에서 흔히 논의되는 역량(competency)이라는 개념의 모형을 적용 확장하여 성적역량(sexual competency) 이라는 목표 하에서 모형을 제시해 보았다. 또한 이러한 모형과 현황조사를 바탕으로 적절한 디지털 성교육 프로그램 개발을 위한 과제를 제시해 보았다.

• 보건행정학회지
• /
• 제13권3호
• /
• pp.1-20
• /
• 2003

The purpose of this study was to investigate the current status of health promotion policies about antismoking, and the relationship between policy status, enforcement of smoking restrictions and perceptions of smoking behaviour among teachers. A representative sample of 173 teachers$.$school inspectors from 150 elementary$.$middle$.$high schools in Gangwon-do was surveyed during Gangwon-do Office of Education's antismoking and temperance training course in 2002 (response rate 60.7%). One staff member from each school was also analyzed regarding school antismoking polices for students and teachers in several locations within and outside the school building. The results showed that 118 elementary$.$middle$.$high schools (78.7%) had an antismoking policy and more schools had a written policy on student antismoking than on teacher antismoking. Most schools (92.4%) in the sample banned smoking by students, but 52 schools (44.1%) allowed smoking by teachers in restricted areas. However, teachers reported seeing smoking sometimes in the toilets (42.7%) or the playground (40.0%) among students and sometimes in the staff room (31.3%) or about every day on school premises (52.7%) among teachers. Irrespective of the type of policy or restrictions on smoking, the association between having a ban on student/teacher smoking and teachers' perceptions of student/teacher smoking in school was not significant. In conclusion, we suggest that most schools must have explicitly an antismoking policy on both students & teachers and enforce consistently a ban in promoting a healthy school environment(smoke-free schools).

• Wind and Structures
• /
• 제12권6호
• /
• pp.479-504
• /
• 2009

Structural health monitoring (SHM) systems have been recently embraced in long span cable-supported bridges, in which buffeting-induced stress monitoring is one of the tasks to ensure the safety of the bridge under strong winds. In line with this task, this paper presents a SHM-oriented finite element model (FEM) for the Tsing Ma suspension bridge in Hong Kong so that stresses/strains in important bridge components can be directly computed and compared with measured ones. A numerical procedure for buffeting induced stress analysis of the bridge based on the established FEM is then presented. Significant improvements of the present procedure are that the effects of the spatial distribution of both buffeting forces and self-excited forces on the bridge deck structure are taken into account and the local structural behaviour linked to strain/stress, which is prone to cause local damage, are estimated directly. The field measurement data including wind, acceleration and stress recorded by the wind and structural health monitoring system (WASHMS) installed on the bridge during Typhoon York are analyzed and compared with the numerical results. The results show that the proposed procedure has advantages over the typical equivalent beam finite element models.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권11호
• /
• pp.6563-6568
• /
• 2013

Background: Tobacco use and quit attempts are two key indicators of the Global Adult Tobacco Survey (GATS) that assess quit attempts among current as well as former tobacco users. The relevant data have inherent policy implications for tobacco cessation programme evaluation. This study aimed to review the concepts of quit attempt assessment and quantifying invalid responses considering GATS-India data. Materials and Methods: GATS assessment of tobacco use and quit attempts were examined in the current literature. Two categories of invalid responses were identified by stratified analysis of the duration of last quit attempt among current users and duration of abstinence among former users. Category A included absolute invalid responses when time-frame of assessment of current tobacco use and less than former tobacco use were violated. Category B included responses that violated the unit of measurement of time. Results: Current daily use, current less than daily use and former use in GATS were imprecisely defined with overlapping of time-frame of assessment. Overall responses of 3,102 current smokers, 4,036 current smokeless users, 1,904 former smokers and 1,343 former smokeless users were analyzed to quantify invalid responses. Analysis indicated overall 21.2% (category A: 7.32%; category B: 17.7%) and 22.7% (category A: 8.05%; category B: 18.1%) invalid responses among current smokers and smokeless users respectively regarding their duration of last quit attempt. Similarly overall 6.62% (category A: 4.7%; category B: 2.3%) and 10.6% (category A: 8.6%; category B: 3.5%) invalid responses were identified among former smokers and smokeless users respectively regarding their duration of abstinence. Conclusions: High invalid responses for a single assessment are due to the imprecise definition of current use, former use and quit attempt; and failure to utilize opportunity of direct data entry interface use during the survey to validate responses instantly. Redefining tobacco use and quit attempts considering an appropriate timeframe would reduce invalid responses.

• Journal of Preventive Medicine and Public Health
• /
• 제46권4호
• /
• pp.192-200
• /
• 2013

Objectives: To measure the prevalence of behavioural risk factors for obesity among urban adolescent school children in Chennai, India. Methods: This study was performed as a cross-sectional study using a World Health Organization-designed Global School-based Student Health Survey questionnaire (modified for India) among adolescent school children studying in 30 randomly selected secondary and higher secondary schools in Chennai city. 1842 adolescents studying in the VIII to XII standards were randomly selected for the study. Results: In the present study, 40.7% of the students ate fruit one or more times per day and 74.5% of the students ate vegetables one or more times per day. Nearly 20% of the students ate fast food items on 4 to 7 days during the previous week. Among the students, 30.4% watched television for more than two hours per day. Nearly 68% of the girls and 22% of the boys did not participate in outdoor sports activities. When the pattern of physical activity of the students was assessed, it was observed that 15.6% were inactive, 43.4% were minimally active, and the remaining 41.0% belonged to the category of health enhancing physical activity. Among the students, 6.2% were overweight and 5.2% were obese. Conclusions: The prevalence of risk factors for obesity was quite high among the adolescents. This study also showed that a great proportion of overweight/obese adolescents had a correct perception of their body weight and they were making efforts to modify risk factors such as television viewing, computer use, a sedentary lifestyle, and unhealthy dietary habits.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.127-131
• /
• 2015

In spite of the socio-economic benefits of the construction industry, it accounts for many deaths, injuries and illnesses in many countries. In developing countries like Vietnam, the situation is even worse. Health and safety (H&S) management plays a crucial role in the efforts to improve H&S performance as it contributes to mitigating the risks of occupational injuries and illnesses. However, within the wider H&S literature in Vietnam, there is no insight into the current state of affairs of H&S management, particularly in terms of the management practices that need attention in order to improve H&S management across the construction sector. This study therefore presents the findings of an inquiry into the H&S management practices of contractors in Vietnam. The study employed a questionnaire survey which yielded 58 responses from contractors, particularly those operating in Southern Vietnam. Some commonly implemented H&S management practices by the contractors are: provision of personal protective equipment (94%), allocation of H&S supervisor on site (90%), and displaying of company H&S policy on construction sites, company website, and head/branch offices (86%). Some of the less implemented practices are: networking/engaging with other companies/institutions (e.g. government offices) about H&S issues (39%), rewarding workers for safe work behaviour (39%), reviewing and updating H&S plans (48%), and displaying regulatory H&S posters on site (45%). The findings have provided some insight into the current state of affairs of the H&S management practices of contractors in Southern Vietnam and could thus inform efforts by industry stakeholders to improve the aspects of H&S management that are lagging.