• Safety and Health at Work
• /
• 제12권4호
• /
• pp.496-504
• /
• 2021

Background: With the increasing demand for industrial robots and the "noncontact" trend, it is an appropriate point in time to examine whether risk assessments conducted for robot operations are performed effectively to identify and eliminate the risks of injury or harm to operators. This study discusses why robot accidents resulting in harm to operators occur repetitively despite implementing control measures and proposes corrective actions for risk assessments. Methods: This study collected 369 operator-injured robot accidents in Korea over the last decade and reconstructed them into the mechanism of injury, work being undertaken, and bodily location of the injury. Then, through the techniques of Systematic Cause Analysis Technique (SCAT) and Root Cause Analysis (RCA), this study analyzed the root and direct causes of robot accidents that had occurred. Causes identified included physical hazards and complex combinations of hazards, such as psychological, organizational, and systematic errors. The requirements of risk assessments regarding robot operations were examined, and three case studies of robot-involved tasks were investigated. The three assessments presented were: camera module processing, electrical discharge machining, and a panel-flipping robot installation. Results: After conducting RCA and comparing the three assessments, it was found that two-thirds of injury-occurring from robot accidents, causative factors included psychological and personal traits of robot operators. However, there were no evaluations of the identifications of personal aspects in the three assessment cases. Conclusion: Therefore, it was concluded that personal factors of operators, which had been overlooked in risk assessments so far, need to be included in future risk assessments on robot operations.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.48-55
• /
• 2015

A variety of safety issues were investigated for chemical reactors using a toluene solvent in case of a fire at small to middle scale chemical plants. The issues covered the operation of pressure-relieving valves and the subsequent discharges of the toluene to the atmosphere either directly or through an absorber, which represent the current practice at most small chemical plants. It was shown that the safety valve on the reactor may not operate within about twenty minutes after an external fire breaks out, but, once relieved, the toluene vapor released directly to the atmosphere may form a large explosion range on the ground. It was also shown that if the discharge is routed to an existing absorber used for the scrubbing of volatile organic compounds or dusts, the column may not operate normally due to excessive pressure drops or flooding, resulting in the hazardous release of toluene vapors. This study proposed two ways of alleviating these risks. The first is to ruduce the discharge itself from the safety valve by using adequate insulation and protection covers on the reactor and then introduce it into the circulation water at the bottom of the absorber through a dip linet pipe equipped with a ring-shaped sparger. This will enhance the condensation of toluene vapors with the reduced effluent vapors treated in the packing layers above. The second is to install a separate quench drum to condense the routed toluene vapors more effectively than the existing absorber.

• 한국식품위생안전성학회지
• /
• 제28권2호
• /
• pp.158-167
• /
• 2013

This study was carried out to assess the safety of cereals and their products (20 species, 205 samples) distributed in Gyeonggi province by analyzing contamination levels such as exposure frequency of Aflatoxins and Deoxynivalenol (DON). Aflatoxins were detected in 16 (8%) samples in total with a range of 0.01~27.88 ${\mu}g/kg$, including 3 of 9 bake flour (33%), 2 of 6 dried corn (33%), 3 of 12 frying flour (25%) and 2 of 11 sorghum (18%). DON was found in 56 (27%) samples including 11 of 13 adlay (85%), 6 of 8 wheat (75%), 6 of 10 processed corn for popcorn (60%), 6 of 11 sorghum (55%) and 7 of 16 barley (44%) with a range of 2.2~754.4 ${\mu}g/kg$. In particular, both Aflatoxins and DON were detected in 8 samples (2 millet, 2 wheat, 1 sorghum, 1 adlay, 1 dried corn, 1 bake flour) simultaneously. As a result of this study, we found that an adult is exposed to Aflatoxins of $0.80({\times})10^{-3}{\mu}g/kg$ b.w./day and DON of 0.18 ${\mu}g/kg$ b.w./day. The quantity of exposure to DON amounted to 18.5 percentage level compared with PMTDI 1 ${\mu}g/kg$ b.w./day suggested on JECFA, therefore we can assess that the possibility of health risks by intake cereals distributed in Gyeonggi province is low. However the concentration of Aflatoxins in one dried corn was 27.88 ${\mu}g/kg$ which was over the maximum residue limits (MRL) suggested on internal and external level, the monitoring about mycotoxin should be conducted on continuously.

• 한국환경보건학회지
• /
• 제35권6호
• /
• pp.538-541
• /
• 2009

Humans have a long history of asbestos use. There are reports from the Roman era, of asbestos victims among the slaves who worked in asbestos mines. The fact that asbestos can induce lung cancer and mesothelioma was verified epidemiologically in the 1960s. Asbestos related diseases are predominantly occupational in nature but can be caused by environmental exposure. Environmental mesothelioma is mainly associated with tremolite asbestos and this information comes from many countries including Turkey, Greece, Corsica, New Caledonia and Cyprus. In 1993, the first case of mesothelioma in Korea was reported in an asbestos textile worker. Recently, some asbestos disease victims who lived near an asbestos factory have their cases before the courts. A series of recent asbestos-related events in Korea, for example, the shocking revelation of asbestos containing talc in baby powders have caused the general public to become aware of the health risks of asbestos exposure. Asbestos related diseases are characterized by a long latency period, especially, mesothelioma which has no threshold of safety. Hence the best strategy for preventing asbestos related diseases is to decrease asbestos exposure levels to as low as possible.

• 한국환경보건학회지
• /
• 제36권6호
• /
• pp.441-455
• /
• 2010

Researchers who work in science and engineering R&D laboratories are commonly exposed to a wide range of chemical, biological and physical hazards. They also may adopt ergonomically poor postures for long periods of time. These factors may increase the risk of adverse health outcomes in laboratory workers. Recently, there were several fatal accidents in the laboratories in universities and research institutes in Korea. Consequently, the 'Laboratory Safety Act' was enacted in 2006. However, there are concerns about the health risk associated with chronic exposures to hazards, as the management measures provided in this Act are very limited, focusing primarily on accident prevention and compensation for lab work-related accidents. In this article, the methods for assessing exposure to chemicals in laboratory environments are discussed. Also, epidemiological studies examining the association between laboratory exposure and health effects, including cancer and reproductive toxicity are extensively reviewed. Finally, the possible roles of environmental health professionals in this area are suggested, along with a list of critical research needs for properly assessing laboratory workers' exposure and risk.

• Food Science and Biotechnology
• /
• 제17권4호
• /
• pp.819-823
• /
• 2008

Mercury and methylmercury concentrations were measured in 225 marine fish samples purchased from retail markets in 5 major Korean cities in 2005. The results showed that the concentrations of mercury and methylmercury ranged from 0.006-0.455 (mean=$0.054{\pm}0.025$) mg/kg and 0.004-0.120 (mean=$0.021{\pm}0.008$) mg/kg, respectively, in fish caught from the coastal waters of the Korean Peninsula. The concentrations in deep-sea fish including tuna ranged from 0.066-2.315 (mean=$0.095{\pm}0.640$) mg/kg for mercury and 0.027-0.897 (mean=$0.281{\pm}0.182$) mg/kg for methylmercury. The estimated weekly intakes (EWIs) of mercury and methylmercury reached 3.92 and 4.70% of the provisional tolerable weekly intakes (PTWI), respectively. Consequently, the levels of mercury and methylmercury in marine fish from current retail markets do not pose any significant health risks for Koreans.

• 한국수산과학회지
• /
• 제45권5호
• /
• pp.454-459
• /
• 2012

To investigate heavy metals (Hg, Pb and Cd) and their potential health risks in commercial dried laver (Porphyra sp.), we collected 45 samples from the major production areas on the western and southern coasts of Korea (Hwaseong, Seocheon, Gunsan, Muan, Shinan, Jindo, Haenam, Wando, Jangheung, Goheung and Busan). The Hg, Pb and Cd concentrations were measured using inductively coupled plasma spectrometry (ICP-MS) or a mercury analyzer. The average Hg, Pb and Cd concentrations in the dried laver were $0.006{\pm}0.0017$, $0.196{\pm}0.0614$ and $0.894{\pm}0.4882$ mg/kg, respectively. Based on the 2007 Korean Public Nutrition Report, these levels are 0.02, 0.11 and 2.47% of the provisional tolerable weekly intake (PTWI) for Hg, Pb and Cd, respectively, established by the FAO/WHO. The hazard quotient (HQ) determined from the ratio of exposure and safe levels were less than 1.0. Therefore, the levels of overall exposure to Hg, Pb and Cd for dried laver were below the recommended JECFA (Joint FAO/WHO Expert Committee on Food Additives) levels, which indicate safe levels for public health.

• 한국환경보건학회지
• /
• 제46권1호
• /
• pp.45-64
• /
• 2020

Objectives: Limited information is available on the presence and associated ecological risks of pharmaceutical residues in aquatic environments near pharmaceutical manufacturing areas in Korea. In this study, we investigated the current state of pharmaceutical contamination and its associated ecological risks in streams near a pharmaceutical manufacturing complex. Methods: Seven pharmaceuticals (acetaminophen, clarithromycin, diclofenac, diphenhydramine, ibuprofen, mefenamic acid and roxithromycin) were measured in water samples collected from the streams near a pharmaceutical manufacturing complex. A predicted no-effect concentration (PNEC) was derived using either the assessment factor method or species sensitivity distribution method. In addition, a hazard quotient for each pharmaceutical was calculated by dividing its measured environmental concentration by its PNEC. Results: Samples collected downstream from the wastewater treatment plant (WWTP) had higher concentrations of pharmaceuticals than those collected from the reference site (upstream). Moreover, pharmaceutical concentrations were greater in ambient water than in the final effluent from the WWTP, which suggested that non-point sources were contributing to the contamination of the ambient water environment. Some of the target pharmaceuticals exhibited a hazard quotient >1, indicating that their potential ecological effects on the aquatic environment near the pharmaceutical industrial area should not be ignored. Conclusion: This study demonstrated that the pharmaceutical manufacturing area was contaminated with residual drugs, and that there was a possible non-point source near the WWTP effluent discharge area. The results of this study will aid in the development of management plans for pharmaceuticals, particularly in hotspots such as pharmaceutical industrial sites and their vicinities.

• Safety and Health at Work
• /
• 제11권4호
• /
• pp.509-516
• /
• 2020

Background: Meta-analyses have shown firefighters to be at an increased risk of several cancer types. Occupational carcinogen exposure may explain these increased risks. This study aims to describe Norwegian fire departments' work conditions from 1950 until today, focusing on factors relevant for potential occupational carcinogen exposure. Methods: With the help of a reference group, we developed a questionnaire on topics related to occupational exposure to carcinogens for the period 1950-2018. Selected Norwegian fire departments provided department-specific responses. Results: Sixteen departments, providing fire services for 48% of the Norwegian population as of 2019 and mainly consisting of professional firefighters, responded to our questionnaire. The introduction of synthetic firefighting foams, more regular live fire training, the introduction of chemical diving, and a higher number of diesel-driven fire service vehicles were identified as changes thought to increase exposure to occupational carcinogens. Changes thought to decrease exposure included the switch from negative to positive pressure self-contained breathing apparatuses, the use of self-contained breathing apparatuses during all phases of firefighting, the use of ventilating fans during firefighting, increased attention to flammable materials used during live fire training, increased attention to handling and cleaning of turnout gear and other equipment, and installment of exhaust removal systems in apparatus bays. Conclusion: Norwegian fire departments' work conditions have seen several changes since 1950, and this could influence firefighters' occupational carcinogen exposure. A peak of carcinogen exposure may have occurred in the 1970s and 1980s before recent changes have reduced exposure.

• 한국산업보건학회지
• /
• 제23권3호
• /
• pp.299-306
• /
• 2013

Objectives: The purpose of this study is to provide current the recent information on indium-related adverse health effects and the Korean indium-related industries. Methods: Peer review papers were searched in environmental, occupational and medical journals with the keyword of 'Indium' and 'ITO' and reviewed. To determine the indium related industries and indium consumption amounts, references and database were investigated and analyzed. In addition, field walk-through surveys and interviews were conducted in order to collect field data and to ascertain the field situation for the processes and industries. Results: A total of 10 cases of indium lung diseases have been reported in series since the first case reported in 2001. Seven cases were found in Japan, two cases in the United States, and one in China. No indium lung case has been reported yet in Korea, but it is believed that there are high potential risks among workers in indium-related industries. There are four categories in indiumrelated- industry; indium production and smelting, manufacturing of indium products such as ITO target, the production of thin films of flat panel display, and indium recovery industry. We found that all these types of industries are operating in Korea. Therefore, it is necessary for industrial hygienists to understand the processes and industries related to indium as well as the adverse health effects of indium. Conclusions: It was found that all four categories of indium-related industry from the indium production to recovery industry are active in Korea. However, the adverse health effects of indium are not well recognized. Therefore, it is believed that there is a high risks in indium-related industry, and it is necessary to make emergency interventions.