• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1209_1210
• /
• 2009

Recently interior of a country have been innovated driverless LRT(lightweight railway train) that has a virtue of reducion of payroll cost, decrease of headway and improvement of speed. But, if driverless LRT will be happened a accident, response capacity considerably have low. And then passenger will have feel fear. This thesis had examination a IEC 62267 : AUGT safety requirement and analyze safe facilities of the inside and outside of the country. Later on, this result will have not only increase economics, reliability, convenience and safety but also set standardization standard.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1770-1774
• /
• 2007

In this paper we deal with a design of the evaluation system to assess the vehicle operational control algorithm for Personal Rapid Transit(PRT) system. PRT system is different from the conventional rail traffic system in such that the station is off-line so as to guarantee a very short headway. In this study we propose an evaluation system to assess the performance of the proposed vehicle control algorithm. The evaluation system is composed of virtual vehicles, central control system, virtual wayside facilities, monitoring equipments. The virtual vehicles are made up by the laptop computers and the central control system employs Power PC process of Motorola Inc. The wayside facilities are implemented by employing the PXI module of the National Instruments Corporation. In order to test the proposed evaluation system a test algorithm is used, which has been simulated in the combined simulation system between Labview Simulation Interface Toolkit and Matlab/Simulink.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.1
• /
• pp.17-29
• /
• 1993

The new flexible controlling method integrated with some existing maneuvers of reducing a great head way during approaching a pilot station or anchor berth, namely , Super Rudder (Woo) controlling method originally was developed. The conclusions of this paper are drawn. 1) Super Rudder (Woo) controlling method has the shortest distance along base course and distance off base course among all reducing maneuvers including Rudder Cycling. 2) This new method is flexibly adjustable to a range of yaw angles 5-35 degrees either ship's side depending on traffic situations, 3) This new method is versatile controlling maneuver enabling shipandlers to reduce or stop a ship's headway and to adjust the proper courses to a pilot station or anchor berth.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.8
• /
• pp.907-913
• /
• 1999

For an automated transportation system like PRT(Personal Rapid Transit) system or IVHS, an efficient vehicle-merging algorithm is required for smooth operation of the network. For management of merging, collision avoidance between vehicles, ride comfort, and the effect on traffic should be considered. This paper proposes an unmanned vehicle-merging algorithm that consists of two procedures. First, a longitudinal control algorithm is designed to keep a safe headway between vehicles in a single lane. Secondly, 'vacant slot and ghost vehicle' concept is introduced and a decision algorithm is designed to determine the sequence of vehicles entering a converging section considering energy consumption, ride comfort, and total traffic flow. The sequencing algorithm is based on fuzzy rules and the membership functions are determined first by an intuitive method and then trained by a learning method using a neural network. The vehicle-merging algorithm is shown to be effective through simulations based on a PRT model.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1992.04a
• /
• pp.105-110
• /
• 1992

This study deals with the effect of a series of moving trucks on the Dynamic Load Factor (DLF). The DLF is calculated by investigating the load effect of moving trucks. Therefore, analytical models for frocks, bridge, and road profiles were developed and dynamic structural analysis computer program were developed. Then the DLFs are calculated as a ratio of maximum dynamic load effect and maximum static load effect. Trucks used in this study are 5 axle semi tractor-trailer with the weight of 36 and 54 ton. Simply supported prestressed concrete box girder bridges with 20 and 40m span length are selected. From the results of the DLF for various headway distances, they show a very scattered and relatively high values of the DLF in case of a 20m span length bridge. For a 40m span length bridge, the results show less scattered and small increase of the DLF compared to a 20m span length bridge.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.1
• /
• pp.9-16
• /
• 2005

Accurate and reliable tracking of train is essential for the train control system. The fixed block system which utilizes track circuit has been used widely for the detection of train position. As an alternative, the moving block system has the advantage over the fixed block system since it enables shorter headway and easier maintenance. This paper presents a new technique for the train tracking system which uses radio signal for the train position detection. The proposed algorithm uses the phase difference of arrival of radio signal for the detection of train position. Experimental verification of the algorithm is presented in the paper.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.56-58
• /
• 2005

This paper for the Train control system which has been used in the railway system for the purpose of headway control is regarded as safety-critical system, which is based on embedded controller. Therefore, for the maintainability, the maintenance time shall be predicted correctly in order to improve availability of railway system and the predictive values shall be proved through the test. In conclusion, for the maintainability of train control system, the solution for exact prediction based on related international standard and the system for justification of derived predictive values shall be proposed.

• Journal of the Korean Society for Railway
• /
• v.8 no.3
• /
• pp.244-252
• /
• 2005

Accurate and reliable tracking of train is essential for a train control system. The fixed block system which utilizes the track circuit has been used widely for detecting train position. As an alternative, the moving block system has the advantage over the fixed block system since it enables shorter headway and easier maintenance. This paper presents a new technique for the train tracking system which uses radio signal for the train position detection. The proposed algorithm uses the phase difference of arrival of radio signal for the detection of train position. Experimental verification of the algorithm is presented in the paper.

• Proceedings of the KSR Conference
• /
• 2003.10a
• /
• pp.181-186
• /
• 2003

In order to develop a high speed train, various conditions have been considered. Fatigue strength assessment by the fluctuation of pressure is an important one. In this study, a numerical simulation has been performed to estimate the fluctuation and frequency of pressure when KHST(Korean High Speed Train)passes through tunnels in the Kyung-Bu high-speed railway. The simulation was based on KHST running the Kyung-Bu high-speed line with the speed of 350km/h and the interval of 10 minute headway. And the tunnel entrance speed was estimated by TPS program. Therefore, the fluctuation and frequency of pressure is expressed in Weibull distribution function in the above running situation. The result in this study would be good guidance to calculate the fatigue life and the index of reliability of body structure. We are going to conduct more study to measure the real value of the pressure of the carbody passing through tunnels, to assess the fatigue reliability and to develop method ＆ procedure for the fatigue reliability design.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1401-1406
• /
• 2007

There is growing interest in CBTC(Communication Based Train Control) system in accordance with the development of the communication technologies. The CBTC system, which adopts the moving block, has advantages such as headway and installation cost reduction compared with the existing system with fixed block. For the moving block system, it is required to locate the trains in real-time. Based on EPLRS(Enhanced Position Location Reporting System) technology, the train position can be provided only through the communication between radios. This paper introduces EPLRS based train detection method and verifies its effect by instance.