• Annals of Rehabilitation Medicine
• /
• 제39권6호
• /
• pp.897-904
• /
• 2015

Objective To investigate differences in plantar pressure distribution between a normal gait and unpredictable slip events to predict the initiation of the slipping process. Methods Eleven male participants were enrolled. Subjects walked onto a wooden tile, and two layers of oily vinyl sheet were placed on the expected spot of the 4th step to induce a slip. An insole pressure-measuring system was used to monitor plantar pressure distribution. This system measured plantar pressure in four regions (the toes, metatarsal head, arch, and heel) for three events: the step during normal gait; the recovered step, when the subject recovered from a slip; and the uncorrected, harmful slipped step. Four variables were analyzed: peak pressure (PP), contact time (CT), the pressure-time integral (PTI), and the instant of peak pressure (IPP). Results The plantar pressure pattern in the heel was unique, as compared with other parts of the sole. In the heel, PP, CT, and PTI values were high in slipped and recovered steps compared with normal steps. The IPP differed markedly among the three steps. The IPPs in the heel for the three events were, in descending order (from latest to earliest), slipped, recovered, and normal steps, whereas in the other regions the order was normal, recovered, and slipped steps. Finally, the metatarsal head-to-heel IPP ratios for the normal, recovered, and slipped steps were $6.1{\pm}2.9$, $3.1{\pm}3.0$, and $2.2{\pm}2.5$, respectively. Conclusion A distinctive plantar pressure pattern in the heel might be useful for early detection of a slip event to prevent slip-related injuries.

• Archives of Plastic Surgery
• /
• 제48권6호
• /
• pp.635-640
• /
• 2021

Background Injuries to the proximal interphalangeal (PIP) joint are common and complex. However, the treatment of osteochondral defects of the head of the proximal phalanx has rarely been described. Herein, we propose a new technique for the management of unicondylar defects of the proximal phalanx that can restore joint amplitudes and provide PIP stability. Methods In this cadaveric feasibility study, unicondylar defects were generated using striking wedges and chisels. First, a transverse tunnel measuring 2 mm in diameter passing through the head of the proximal phalanx was made. A second tunnel at the base of the middle phalanx with the same diameter was then created. The hemitendon of the flexor carpi radialis graft was passed through each of these tunnels. The proximal end of the graft was interposed in the area with a loss of bone substance. The ligamentoplasty was then tensed and fixed by two anchors on the proximal phalanx. Joint amplitudes and frontal stability were measured preoperatively and postoperatively. Results There was no significant change in the joint's range of motion: preoperatively, the mean mobility arcs were -2° to 113.80°, and they were -2° to 110° after the procedure (P=0.999). There was no significant difference in joint stability (P>0.05). Conclusions Ligamentoplasty with PIP interposition appears to be a possible solution for the management of unicondylar defects of the proximal phalanx. An evaluation of clinical results is planned in order to definitively confirm the validity of this procedure.

• Clinics in Shoulder and Elbow
• /
• 제21권4호
• /
• pp.220-226
• /
• 2018

Background: This study introduces a surgical technique with good clinical outcome useful in the treatment of osteoporotic displaced 3- or 4-part proximal humeral fractures. Methods: From May 2014 to February 2016, 16 patients with displaced 3- or 4-part proximal humeral fractures were treated by application of a locking plate with an endosteal strut allograft via a deltoid splitting approach with a minimum follow-up of 12 months. The allograft was inserted through a fractured gap of the greater tuberosity to support the humeral head and then fixed by a locking plate with meticulous soft tissue dissection to protect the axillary nerve. Surgical outcomes were evaluated by the American Shoulder and Elbow Surgeons (ASES) and visual analogue scale (VAS) scores, radiological imaging, and clinical examination. Fixation failure on radiographs was defined as a >$5^{\circ}$ loss of neck shaft angle (NSA) compared to that on an immediate postoperative radiograph. Avascular necrosis (AVN) of the humeral head was also evaluated. Results: In all cases, complete union was achieved. The ASES and VAS scores were improved to $85.4{\pm}2.1$ and $3.2{\pm}1.3$, respectively. Twelve patients (75.0%) had greater than a $5^{\circ}$ change in NSA; the average NSA change was $3.8^{\circ}$. Five patients (31.3%) had unsatisfactory ranges of motion exhibiting a <$100^{\circ}$ active forward flexion. No axillary nerve injuries or AVN were observed at the last follow-up. One patient was converted to reverse total arthroplasty due to severe pain and functional deficit. Conclusions: Minimally invasive fixation via a locking compression plate and an endosteal fibula strut allograft in Neer classification 3-or 4-part fractures with severe osteoporosis in elderly patients can achieve good clinical results.

• Clinics in Shoulder and Elbow
• /
• 제25권2호
• /
• pp.101-105
• /
• 2022

Background: Rotator cuff tears cause pathologies of the long head of the biceps tendon (LHBT). One of the surgical treatments for such a tear is LHBT tenodesis to the humerus. This study aims to compare simultaneous rotator cuff repair and LHBT tenodesis with or without detachment of the proximal end of the LHBT (PELHBT) from its site of adhesion to the glenoid. Methods: This retrospective study involved patients affected by LHBT pathology with rotator cuff tear. The patients were divided into two groups, with or without PELHBT detachment from the glenoid. Therapeutic outcomes were investigated by evaluation of patient satisfaction, pain based on visual analog scale, shoulder function based on Constant score and simple shoulder test, and biceps muscle strength based on the manual muscle testing grading system before surgery, at 6 months, and at the final visit after surgery. Results: Groups 1 and 2 comprised 23 and 26 patients, respectively, who showed no significant differences in demographic characteristics (p>0.05). Shoulder function, biceps muscle strength, pain, and satisfaction rate improved over time (p<0.05) but were not significantly different between the two groups (p>0.05). No post-surgical complication was found in either group. Conclusions: There was no difference in final outcomes of tenodesis with or without detachment of the PELHBT from the supraglenoid tubercle. Such tendon detachment is not necessary.

• Journal of Korean Neurosurgical Society
• /
• 제47권5호
• /
• pp.377-380
• /
• 2010

The abducens nerve usually travels from the brainstem to the lateral rectus muscle as a single trunk. However, it has been reported that this nerve could split into branches occasionally. We attempted to show the aberrant course of abducens nerve in a specimen with unilateral duplicated abducens nerve and review relevant literatures. The micro-dissections were performed in a head specimen injected with colored latex under the microscope. The abducens nerve was duplicated unilaterally. This nerve emerged from the pontomedullary sulcus as a single trunk and splitted into two branches in the prepontine cistern. These two separate branches were piercing the cerebral dura of the petroclival region respectively. The slender lower branch passed between the petroclinoid and petrosphenoid ligaments and the thick lower one passed under the petrosphenoid ligament. These two branches united just lateral to the ascending segment of internal carotid artery in the cavernous sinus. The fact that there are several types of aberrant abducens nerve is helpful to perform numerous neurosurgical procedures in the petroclival region and cavernous sinus without inadvertent neurovascular injuries.

• International Journal of Automotive Technology
• /
• 제7권5호
• /
• pp.555-564
• /
• 2006

The aim of this paper is to contribute to the efficient design of traffic light poles involved in vehicle frontal collisions by developing a computer-based, finite-element model capable of capturing the impact characteristics. This is achieved by using the available non-linear dynamic analysis software "LS-DYNA3D", which can accurately predict the dynamic response of both the vehicle and the traffic light pole. The fiber reinforced polymer(FRP) as a new pole's material is proposed in this paper to increase energy absorption capabilities in the case of a traffic pole involved in a vehicle head-on collision. Numerical analyses are conducted to evaluate the effects of key parameters on the response of the pole embedded in soil when impacted by vehicles, including: soil type(clay and sand) and pole material type(FRP and steel). It is demonstrated from the numerical analysis that the FRP pole-soil system has favorable advantages over steel poles, where the FRP pole absorbed vehicle impact energy in a smoother behavior, which leads to smoother acceleration pulse and less deformation of the vehicle than those encountered with steel poles. Also, it was observed that clayey soil brings a slightly more resistance than sandy soil which helps reducing pole movement at ground level. Finally, FRP pole system provides more energy absorbing leading to protection during minor impacts and under service loading, and remain flexible enough to avoid influencing vehicle occupants, thus reducing fatalities and injuries resulting from the crash.

• Journal of Trauma and Injury
• /
• 제27권2호
• /
• pp.33-37
• /
• 2014

Central venous catheterization through a subclavian approach is indicated for some special purposes but it may cause many complications such as infection, bleeding, pneumothorax, thrombosis, air embolization, arrhythmia, myocardial perforation, and nerve injury. A case involving a mistaken central venous catheterization into the right vertebral artery through the subclavian artery is presented. A 33-year-old man who had deteriorated mentality after head injury underwent an emergency craniotomy for acute epidural hematomas on the right frontal and temporal convexities. His mentality improved rapidly, but he complained of continuous severe pain in the right posterior neck even though he had no previous symptom or past medical history of such pain. Three-dimensional cervical spine computed tomography (3D-CT) was performed first to rule out unconfirmed cervical injuries and it revealed a linear radiopaque material intrathoracically from the level of the 1st rib up to the level of C6 in the right vertebral foramen. An additional neck CT was performed, and the subclavian catheter was indwelling in the right vertebral artery through right subclavian artery. For the purpose of proper fluid infusion and central venous pressure monitoring, the subclavian vein catheterization had been performed in the operation room after general anesthesia induction before the craniotomy. Sufficient anatomical consideration and prudence is essential because inadvertent arterial cannulation at a non-compressible site is a highly risky iatrogenic complication of central venous line placement.

• 수면정신생리
• /
• 제1권1호
• /
• pp.99-106
• /
• 1994

The authors report a case of REM sleep behavior disorder which occurred in a 69-year-old business man. He began experiencing episodic "acting out" behavior of his dream at the age of 66. The episodes tended to be associated with dream contents, mainly being chased or threatened. Before that, his sleep was relatively quiet despite occasional nightmares, midsleep arousal, and shallowness. Injuries resulted from leaping out of bed, jumping onto furnitures, and grabbing and biting the spouse's arm. Most recent dream-incurred laceration of chin required 5 sutures. Medical and psychiatric history revealed no significant findings except that he had been overanxious all his life within himself with others' reputation of himself as pleasant and easy-going. A nocturnal polysomnogram showed repeatedly intermittent increase of chin and/or leg muscle tones during otherwise characteristic REM sleep period. The overnight video recording revealed head lifting and limb movements during REM sleep periods. Brain MRI and EEG were normal. Job-related stress was presumed to be an etiological possibility. Clonazepam 0.25-0.5mg nightly almost completely relieved the symptoms.

• Archives of Reconstructive Microsurgery
• /
• 제4권1호
• /
• pp.23-32
• /
• 1995

Severe upper and lower extremity trauma may result in soft tissue loss with exposed bone and the subsequence of risk of chronic osteomyelitis or malunion of fracture fragments. Such injuries present a major reconstructive problem. But Since the introduction of microsugical technique, free muscle and myocutaneous flaps were employed to provide coverage of severely injured defects. Since Tai and Hasegawa(1974) first reported a breast reconstruction using by rectus abdominis myocuraneous flap, the free rectus myocutaneous flap has been widely employed for breast reconstuction, head and neck reconstruction, and extremity reconstruction in these days. The authors present their successful experience with free rectus abdominis muscle and rectus abdominis myocutaneous flaps for upper and low extremity reconstruction. From Nov. 94, to May 95, Five cases of severely injured extremites due to trauma or contact burn were treated with free rectus abdominis muscle flap or free rectus abdominis myocutaneous flap. All flaps except 1 case were survived without severe complications. As free muscle or myocutaneous flap, the free rectus abdominis flap has the advantages of a reliable pedicle, easy dissection, and an acceptable donor site, so it seems logical to apply the free rectus abdominis flap to apply in upper and lower extremity reconstruction.

• 복식문화연구
• /
• 제25권4호
• /
• pp.529-542
• /
• 2017

The purpose of this study is to utilize technology as basic data for smart clothing product research and development. This technology can recognize user's motion according to characteristics types and functions of wearable smart clothing products. In order to analyze the case of motion recognition products, we searched for previous research data and cases referred to as major keywords in leading search engines, Google and Naver. Among the searched cases, information on the characteristics and major functions of the 42 final products selected on the market are examined in detail. Motion recognition for smart clothing products is classified into four body types: head & face, body, arms & hands, and legs & feet. Smart clothing products was developed with various items, such as hats, glasses, bras, shirts, pants, bracelets, rings, socks, shoes, etc., It was divided into four functions health care type for prevention of injuries, health monitor, posture correction, sports type for heartbeat and exercise monitor, exercise coaching, posture correction, convenience for smart controller and security and entertainment type for pleasure. The function of the motion recognition smart clothing product discussed in this study will be a useful reference when designing a motion recognition smart clothing product that is blended with IT technology.