• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.51-57
• /
• 2010

In recent years, a large number of study for rear impact has been conducted and as a result of study, researchers proposed the neck injury criteria and test procedures. But many questions, related to injury criteria and dummy biomechanical levels, remain unresolved. In recently reports, rear impact motions of BioRIDIIg is not humanlike but better than other dummy(HybridIII, RID3d). So, in this paper, 4 times sled test would be done to find the substitutable neck injury criteria in BioRIDIIg. To review corelation trend with neck injury critera and head-neck movement, we compared with recently announced neck injury criteria(NIC, Nkm, T1 ect.) and head-neck X-direction movement in BioRIDIIg. Finally, we find the head-neck X-direction movement on head C.G to T1 point may be considerable as the additional neck injury criteria.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.16-16
• /
• 2003

In this study, for a safety assessment of wheelchair occupant in side impact, we used a dynamic sled impact test results. The test was carried out total 6 times and impact speed was 13g$\pm$0.43/28km/h$\pm$0.95, By using EURO SID-1 dummy, head performance criteria(HPC), abdominal peak force, etc. were measured. We evaluated wheelchair occupant safety by motion criteria(MC) which was measured by head, trunk and side deformation change of wheelchair and Head & Neck injury criteria(HNI) measured by using head and neck deformation angle and time relation. When we assumed that the maximum injury value in side impact was 100%, the results of motion criteria(MC) of wheelchair occupant were max 80.3, mim 32.3 and average 60.3%, Head & Neck injury criteria(HNI) value were max 118.4, min 14.5 and average 59.7%.

• 자동차안전학회지
• /
• 제4권2호
• /
• pp.5-10
• /
• 2012

Whiplash is the most frequent injury among occupants in low speed rear-end car collision. The aim of this paper is to analyze thecorrelation between influence parameters of head restraints and whiplash injury criteria.In this paper, DFSS (Design for Six Sigma) method is used for optimum design of head restrains. Four control factors of head restraints have selected by function matrix method. The effects of the control factors have been experimentally evaluated by using a sled pulse from 16km/h relative velocity which is suggested by KNCAP (Korean New Car Assessment Program). In order to reduce the noise factors of dynamic tests, whiplash tests were repeated twice. By using DFSS, the correlation between control factors and injury criteria has been comprehended.

• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1232-1243
• /
• 2000

Motor vehicle accidents in rear impacts cause more than fifty percents of drivers to suffer from neck injuries. It is known that most neck injuries are associated with rear-end collisions at a speed lower than 32 km/h and between the Abbreviated Injury Scale (AIS) 1 and AIS 2. Two different types of low speed crash tests such as the frontal barrier and rear moving barrier crashes have been conducted by following the procedure of the Research Committee for Automobile Repairs (RCAR). The injury for the neck and the Head Injury Criteria (HIC) were measured by using the sensors mounted on dummies. We reviewed neck injures and the relationship between the neck and head injuries, and examined the deceleration of the body. Using the experimental test data at the neck, we investigated an improved neck injury criterion Nij. Also, the effects of the position of a head restraint on reducing the frequency and severity of the neck injury in rear-end collisions were investigated.

• International Journal of Safety
• /
• 제6권1호
• /
• pp.1-6
• /
• 2007

Operation of human-centered robot, in general, facilitates the creation of new process that may potentially harm the human operators. Design of safety-guaranteed operation of human-centered robots is, therefore, important since it determines the ultimate outcomes of operations involving safety of human operators. This study discusses the application of geometric tolerance and head injury criteria to safety assessment of human-centered robotic operations. Examples show that extending "Work Area" has more significant effect on the uncertainty in safety than extending the system range in the presence of velocity control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1439-1440
• /
• 2011

• 대한의용생체공학회:의공학회지
• /
• 제27권6호
• /
• pp.365-369
• /
• 2006

According to the IIHS (Insurance Institute fur Highway Safety), side impacts are made up 30% of all accidents (reported 1998). In the case of auto accidents, head and neck injuries were most common as 58%, injuries to the body's trunk equaled 32%, and injuries to the abdomen were 21%. Therefore in this study, injury of wheelchair occupant in frontal and side impact of wheelchair loaded vehicle was analyzed using computer simulation method. The occupant was restrained at the rear of wheelchair by the lap belt. The detailed fixation and restrain conditions of the wheelchair occupant are referred to SAR J2249's recommendation. We estimated HIC(Head Injury Criteria) and HNIC (Head and Neck Injury Criteria) based on measured data.

• 대한의용생체공학회:의공학회지
• /
• 제24권1호
• /
• pp.15-21
• /
• 2003

본 연구에서는 경량휠체어 탑승자의 차량 전방충돌시 안전성 평가를 위하여 동적 슬래드 충격실험을 하였다. 실험은 총 6회 시행하였으며 충격속도는 20g/48 $\pm$2km/h 였고, Hybrid III 50%ile 성인남자 인체모형을 사용하여 두부손상기준(Head Injury Criteria), 목의 굴전모멘트, 축 인장력, 전단력, 흉부 가속도. 두부, 휠체어, 무릎의 전방 쏠림량을 측정하였으며 미국자동차학회 규격인 SAE J2249에서 제안한 동작기준 (Motion Criteria)과 미국 제너럴모터스사의 자체기준(GM-IARV)인 복합상해기준(Combined Injury Criteria)을 이용하여 안전성평가를 하였다. 실험결과는 경량 휠체어 탑승자의 전방 충돌 시 최대 상해치를 100%로 봤을 때 휠체어와 탑승자 거동의 위험도지수 MC는 52%, 탑승자의 상체 위험도지수 CIC는 60.1% 였다.

• 자동차안전학회지
• /
• 제5권2호
• /
• pp.45-50
• /
• 2013

The whiplash Injuries due to rear collision occur frequently. As result, in many countries, seat performance is being assessed and developed to improve head whiplash injury in rear collision of passenger car. This study compares whiplash assessment methods in each country. Using the DFSS(Design for Six Sigma) method, the correlation between influence parameters of head restraints and whiplash injury criteria is analyzed. Four control factors are used in this study. And total 11 whiplash injury criteria from NCAP(New Car Assessment Program) of Korea, Europe, China and IIHS(Insurance Institute for Highway Safety) of USA are used for output response. By the experimental design, L9 orthogonal coordinate system is configured and is tested by sled test equipment, twice. By using average assay value and ANOVA, the correlation between control factors and injury criteria has been comprehended. Optimization design of head restraint according the regional seat safety assessment was derived through the correlation.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.179-187
• /
• 2004

In this study, for a safety assessment of wheelchair occupant in frontal and side impact of wheelchair loaded vehicle, a sled impact test was perfumed. Each test was carried out total 6 times, by using Hybrid III 50th-percentile male dummy in light weight and electric wheelchair. We estimate MC(Motion Criteria), CIC(Combined Injury Criteria), HIC(Head Injury Criteria), HNIC(Head and Neck Injury Criteria) based on measured data. Through this study, we make an assessment of risk analysis of wheelchair occupant and wheelchair. Through this study, safety standard of wheelchair is to be evaluated.