• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.48-53
• /
• 2017

Many construction accidents can be lead to a death occurring at construction sites. These are considerably due to potentially-hazardous equipment and machine or unexpected collapsion at earth work due to land slide and so on. Almost 50% of the total death and injury, occurred in construction sites in 2015. 66% of those serious accidents are due to falling occurring from construction sites when they work. Therefore, causes and recommendations of each accident should be deeply thought and analysed The indirect causes are directly related to safe consciousness of the construction workers. Actually, their safety consciousness are not high, even very low, it is thought. Questionnaire survey sheets have been distributed to Seoul, Incheon, and Gyunggi-Do area, first. And then, the authors have collected those directly at sites, in order to increase collection rate of the sheets. The totally, collected sheets are 295 sheets. And, they are analysed using SPSS version 19 package program. Workers internal consciousness has been investigated and reviewed and analysed by statistical method such as frequency rate, crossed, and correlated analysis. And finally the conclusions for the above analyses are as follows; Heavy weight worth a crew of more than two workers should be necessarily considered for the advanced safety plan and needed for making a highly potential hazard group at construction sites. Safety consciousness, earing p.p.e, workman ship should be mainly considered for investing safety costs with an aspect of human factor.

• Korean Journal of Ecology and Environment
• /
• v.55 no.3
• /
• pp.185-200
• /
• 2022

The risk of various hazardous substances in aquatic environment comprises not only the concentration of substances in the environmental medium but also their accumulation in fish through complex food web and the health risks to humans through the fish. In Korea, the monitoring of residual toxicant in aquatic ecosystems began in 2016 following the enforcement of the Acts on registration and evaluation for the management of chemicals used in daily life (consumer chemical products), and attention has been paid to potentially hazardous substances attributed to them. Recently, studies have been carried out to investigate the distribution of these hazardous substances in the ecosystem and calculate their emission factors. These include the accumulation and transport of substances, such as detergents, dyes, fragrances, cosmetics, and disinfectants, within trophic levels. This study summarizes the results of recently published research on the inflow and distribution of hazardous substances from consumer chemical products to the aquatic environment and presents the scientific implication. Based on studies on aquatic environment monitoring techniques, this study suggests research directions for monitoring the residual concentration and distribution of harmful chemical substances in aquatic ecosystems. In particular, this study introduces the directions for research on trophic position analysis using compound specific isotope analysis and trophic magnification factors, which are needed to fulfill the contemporary requirements of selecting target fish based on the survey of major fish that inhabit domestic waters and assessment of associated health risk. In addition, this study provides suggestions for future biota monitoring and chemical research in Korea.

• Journal of the Society of Disaster Information
• /
• v.4 no.1
• /
• pp.138-152
• /
• 2008

The most important factor in the maintenance of chemical industry facilities is related with deterioration and corrosion. Leakage of hazardous materials is likely to occur because the confirmation and maintenance of bottom plates are very difficult while the bottom corrosion of the massive hazmat-storage facilities is most dangerous especially. As a result of the analysis of the corrosion locations, areas, usage condition of 287 hazmat-storage tanks on this syudy, it is concluded that the main external corrosion factors are the inflow of moisture and the materials inducing corrosion in the air such as sodium chloride and the main internal corrosion factors are corrosion react caused by stay of seawater, sulfur and moisture in hazmat for a long time without appropriate discharges. It is anticipated that the corrosion of bottom plates can be restrained effectively by establishing the proper measures for the each corrosion cause.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.251-262
• /
• 2004

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by shotball blasting. To developement of equipment, There is to be down noise and dust. Acording to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor. We have taken Taguchi's parameter design approch, specifically orthogonal array, and determined the optimal levels of stone surface through analysis of the experimental results using SIN ratio.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.379-403
• /
• 2009

The Purpose of this study is to research the problems of trade restriction for an environment protection. Environmental regulation relate to trade are Convention on International Trade in Endangered Species of Wild Fauna & Flora, Montreal Protocol on Substances that Deplete the Ozone Layer, Kyoto Protocol to the UN Framework Convention on Climate Change, Basel Convention on the Control of Transboundary Movements of Hazardous Wastes & Their Disposal, Cartagena Protocol on Biosafty and WTO Agreement. Regulatory action for environmental protection has economics instrument, command & control, liablity, damage compensation, voluntary agreement. In the case of our country, impact of regulatory action for environmental protection is low. Because is recognized position of developing country yet. For in the balance rules of trade and enviroment, First must satisfy WTO's basic principles and principle of quantitative restrictions prohibition, Second, operation of protection action must reasonable and objective standards Third, must satisfy GATT article 20 (b) clause and (g) protestation each essential factor To grow for environment advanced country, we should do i) using of FTA ii) international cooperation strengthening for developing country position iii) construction of environment information network

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.275-290
• /
• 2013

The main cause of building fire fatalities occur in the combustible material heat, smoke and toxic gases are. Building interior decoration, etc., especially as much of the harmful substances generated during combustion, and, used in domestic architecture wallpaper, ceiling, and other plastics, built-in foam insulation also analyzed recognition of fire hazards approach to test the conkalrorimiteo test, choedaeyeolbangchulryul through, chongbal heat, mass loss rate, generates carbon monoxide gas hazard ratio tests, analysis and evaluation rigid foam index testing the toxicity of hazardous material generated by performing a gas clean up and assess the material test results, the minimum order to provide data to quantify the risk of fire. Ensure fire safety of building materials, composite materials in order to test the various risk factors could be considered organic to the introduction of testing and evaluation is needed urgently.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.759-768
• /
• 2007

Construction is one of the most hazardous industries due to its unique nature. Recent occurrences of highly publicised and criticized construction site accidents have highlighted the immediate need for the construction industry to address safety hazards. Safety used to be addressed as an isolated issue in the past, but the problem of safety is an emergent property of a system. In general, it seems that both industrial practitioners and government officials have tended to address safety by focusing on technical aspects and looking for immediate causes of accidents after they have taken place. The objective of this paper is to examine issues and critical factors that affect the safety standards from a holistic point of view. The job of making worksites safe should not just fall squarely on the contractors but should be shared by all parties in the value chain of construction activities.

• Journal of Radiation Protection and Research
• /
• v.25 no.2
• /
• pp.99-107
• /
• 2000

Through the results of off-gas analysis at 3 sampling points in Plasma Arc Melting vitrification pilot plant, it was evaluated the partitioning of spiked materials in off-gas and the decontamination characteristic of off-gas treatment system. Spiked materials are hazard_us heavy metals(Pb, Cd, Hg), radioactive surrogate(Co, Cs) and radioactive materials($^{60}Co,\;^{137}Cs$). Through the Trial burn tests, Decontamination factor of spiked materials in off-gas treatment system is calculated.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.107-117
• /
• 2007

Dispersion characteristics and envirounmental impactes of the stream sediments were investigated and geochemical disaster in the Namhae-Hwagye area was predicted. Stream sediments having no possibility of contamination effect and representing drainage basins were collected. Major and hazardous elements concentrations were determined by XRF, ICP-AES and NAA analysis methods. Acid decomposition for the ICP-AES have been used $HClO_4$ and HF with $200^{\circ}C$ heating at 1'st and after that $HClO_4$, HF and HCl with $200^{\circ}C$ heating at 2'nd stage. Hazardous elements concentrations for the stream sediments in the Namhae area were Cu $5.66{\sim}168\;ppm$, Pb $18.0{\sim}40.7\;ppm$, Cr $21.6{\sim}147\;ppm$, Co $4.86{\sim}25.3\;ppm$. Hazardous elements concentrations for the stream sediments in the Hwagye area were Cu $16.4{\sim}41.2\;ppm$, Pb $26.5{\sim}37.5\;ppm$ Cr $79.6{\sim}153\;ppm$, Co $15.7{\sim}29.5\;ppm$. Concentration of Cu and Co in the stream sediments show a negative correlation with $SiO_2$ in all study area. According to E.I.(Enrichment Index) of stream sediments was not enriched in study area. And average E.I. was 0.35 (Namhae) and 0.56 (Hwagye) respectively. The stream sediments were enriched as in order of Pb > Cr > Co > Cu. And the average of Enrichment Factor (E.F.) was 0.46 to 2.84, respectively. E.F. concentration of Cu and Co were nearly similar enrichment characteristic but E.F. concentration of Cr were higher enrichnent characteristic in Namhae than Hwagye area. Pb was highly enriched in all study area but the tolerable level that used to investigate the enrichment degree of hazardous elements, was not exposed to harmful hazardous elements.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.120-127
• /
• 2005

This study examines the occurrence of accidents when workers were travelling on construction sites and the differences in risk involved in each occupation. An analysis of 750 fatal accident reports found that in 138 cases, the fatality occurred when the workers were travelling on site. The 138 cases were then divided according to occupation and were then examined to determine how the workers in each occupation had been affected by various hazardous situations. There were significant differences in accident occurrence between the occupations and in the various hazardous situations. The results imply that the cultural aspect of each occupation leads to a substantial difference in the possibility of fatal injuries or death and that such differences in risk should be taken into account when planning the workers' movements on site. The findings of this study aim to help workers to understand the risks entailed when travelling on site and also to assist managers in the planning of workers, movements on construction sites.