• 한국가스학회지
• /
• 제8권4호
• /
• pp.70-76
• /
• 2004

본 연구에서는 가스 산업 시설에서의 적합한 잠재위험성 확인 기법을 선정하기 위해 가스 산업 시설 및 12가지의 기법들을 분석하고, 기법 선정에 영향을 미치는 6가지의 요소를 적용하여 기법 선정에 대한 guideline을 제시하였다. 합리적인 기법의 선정을 위해서 선정에 영향을 미치는 요소들과 각 공정 또는 설비별 사고 발생의 원인과 결과를 8가지의 특성으로 분류하여 4가지의 index를 작성하였다. 또한, flowchart 형식의 의사 결정 과정에 작성된 index를 대입하여 사용이 부적합한 기법들을 소거하고, 최적의 기법 사용에 대한 대안을 제시할 수 있도록 하였다. 또한, 규제요건 비대상 사업장의 자체적 내부 안전성 향상을 위한 guideline으로 활용될 수 있을 것이다.

• 한국수자원학회논문집
• /
• 제40권12호
• /
• pp.969-983
• /
• 2007

본 연구에서는 도시화로 인해 왜곡된 물순환을 치수, 이수, 수질관리 등의 측면에서 건전화시키기 위해 지속가능한 유역통합관리 계획을 수립하기 위한 10단계의 절차와 적용방법을 개발하여 제시하였으며 이 중 Step 2에 해당하는 문제점 도출 및 우선순위 결정 단계를 수행하였다. 유역의 잠재적인 위험도를 나타내는 홍수피해잠재능(PFD), 건천잠재능(PSD), 수질오염잠재능(PWQD), 유역평가지수(WEI)를 산정하기 위해 다기준 의사결정기법과 지속가능성평가지수 개념을 사용하였다. 사용된 다기준 의사결정 기법들은 복합계획법, 타협계획법, Regime, ELECTRE II, EVAMIX 방법이며 자료의 가용성과 목적(예비타당성, 타당성)에 따라 다르게 사용될 수 있다.

• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.15-24
• /
• 2016

This study conducted an evaluation of the extent of debris flow damage using SINMAP, which is slope stability analysis software based on the infinite slope stability method, and FLO-2D, a hydraulic debris flow analysis program. Mt. Majeok located in Chuncheon city in the Gangwon province was selected as the study area to compare the study results with an actual 2011 case. The stability of the slope was evaluated using a DEM of $1{\times}1m$ resolution based on the LiDAR survey method, and the initiation points of the debris flow were estimated by analyzing the overlaps with the drainage network, based on watershed analysis. In addition, the study used measured data from the actual case in the simulation instead of existing empirical equations to obtain simulation results with high reliability. The simulation results for the impact of the debris flow showed a 2.2-29.6% difference from the measured data. The results suggest that the extent of damage can be effectively estimated if the parameter setting for the models and the debris flow initiation point estimation are based on measured data. It is expected that the evaluation method of this study can be used in the future as a useful hazard mapping technique among GIS-based risk mapping techniques.

• KIEE International Transactions on Power Engineering
• /
• 제5A권4호
• /
• pp.322-330
• /
• 2005

This paper proposes methods to incorporate station related aging failures in composite system reliability assessment. Aging failures of station components, such as circuit breakers and bus bars, are a major concern in composite power system planning and operation as an increasing number of station components approach the wear-out phase. This paper presents probabilistic models for circuit breakers involving aging failures and relevant evaluation techniques to examine the effects of station related aging outages. The technique developed to incorporate station related aging failures are illustrated by application to a small composite test system. The paper illustrates the effects of circuit breaker aging outages on bulk system reliability evaluation and examines the relative effects of variations in component age. System sensitivity analysis is illustrated by varying selected component parameters. The results show the implications of including component aging failure considerations in the overall analysis of a composite system.

• 한국수자원학회논문집
• /
• 제41권1호
• /
• pp.101-113
• /
• 2008

본 연구는 안양천 유역의 물순환 건전화를 위한 최종 대안을 제시하기 위해 비용효과분석을 수행하였다. 이중 편익산정은 진술선호기법 중 하나인 실험선택법(Choice Experiments, CE)과 대안의 평가지수(Alternative Evaluation Index, AEI)를 결합하여 수행하였다. 실험선택법은 지역별로 다양한 속성을 보이는 안양천 유역을 잠재적 위험도와 지리적 특성을 바탕으로 6개 지역으로 나누어 설문과 분석을 수행하였다. NB > 0 이상인 대안들은 공학적, 경제적으로 매우 우수한 대안이므로 실행을 적극 검토할 필요가 있다.

• 한국지진공학회논문집
• /
• 제20권6호
• /
• pp.401-412
• /
• 2016

On Tuesday, January 17, 1995, an earthquake of magnitude 7.2 struck the Port of Kobe. In effect, the port was practically destroyed. After a hazard investigation, researchers reached a consensus to adopt a performance-based design in port and harbor structures in Japan. A residual displacement of geotechnical structures after an earthquake is one of the most important engineering demands in performance-based earthquake-resistant design. Thus, it is essential to provide reliable responses of geotechnical structures after an earthquake through various techniques. Today, a nonlinear explicit response history analysis(NERHA) of geotechnical structures is the most efficient way to achieve this goal. However, verification of the effective stress analysis, including post liquefaction behavior, is difficult to perform at a laboratory scale. This study aims to rigorously verify the NERHA by using well-defined field measurements, existing numerical tools, and constitutive models. The man-made, Port Island, in Kobe provides intensive hazard investigation data, strong motion records of 1995 Kobe earthquake, and sufficient engineering parameters of the soil. Two dimensional numerical analysis was conducted on the caisson quay wall section at Port Island subjected to the 1995 Kobe earthquake. The analysis result matches very well with the hazard investigation data. The NERHA procedure presented in this paper can be used in further studies to explain and examine the effects of other factors on the seismic behavior of gravity quay walls in liquefiable soil areas.

• 산업경영시스템학회지
• /
• 제13권21호
• /
• pp.29-41
• /
• 1990

An assessment of risk in industrial and urban environments is essential in the prevention of accident and in the analysis of situations which are hazardous to public health and safety. The risk imposed by a particular hazard increases with the likelihood of occurence of the event, the exposure and the possible consequence of that event. In a traditional approach, the calculation of a quantitative value of risk is usually based on an assignment of numerical values of each of the risk factors. Then the product of the values of likelihood, exposure and consequences called risk score is derived. However vagueness and imprecision in mathematical quantification of risk are equated with fuzziness rather than randomness. In this paper, a fuzzy set theoretic approach to risk analysis is proposed as an alternative to the techniques currently used in the area of systems safety. Then the concept of risk evaluation using linguistic representation of the likelihood, exposure and consequences is introduced. A risk assessment model using approximate reasoning technique based on fuzzy logic is presented to drive fuzzy values of risk and numerical example for risk analysis is also presented to illustrate the results.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.183-183
• /
• 2023

Smart water cities (SWC) are urban municipalities that utilizes modern innovations in managing and preserving the urban water cycle in the city; with the purpose of securing sustainability and improving the quality of life of the urban population. Understanding the different urban water characteristics and management strategies of cities situate a baseline in the development of evaluation scheme in determining whether the city is smart and sustainable. This research herein aims to develop measurements and evaluation for SWC Key Performance Indicators (KPIs), and set up a unified global standard and certification scheme. The assessment for SWC is performed in technical, as well as governance and prospective aspects. KPI measurements under Technical Pillar assess the cities' use of technologies in providing sufficient water supply, monitoring water quality, strengthening disaster resilience, minimizing hazard vulnerability, and maintaining and protecting the urban water ecosystem. Governance and Prospective Pillar on the other hand, evaluates the social, economic and administrative systems set in place to manage the water resources, delivering water services to different levels of society. The performance assessment is composed of a variety of procedures performed in a quantitative and qualitative manner, such as computations through established equations, interviews with authorities in charge, field survey inspections, etc. The developed SWC KPI measurements are used to evaluate the urban water management practices for Busan Eco Delta city, a Semulmeori waterfront area in Gangseo district, Busan. The evaluation and scoring process was presented and established, serving as the basis for the application of the smart water city certification all over the world. The established guideline will be used to analyze future cities, providing integrated and comprehensive information on the status of their urban water cycle, gathering new techniques and proposing solutions for smarter measures.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.450-457
• /
• 2004

In this research, the automatic synthesis of knowledge models is proposed. which are the basis of the methods using qualitative models adapted widely in fault diagnosis and hazard evaluation of chemical processes. To provide an easy and fast way to construct accurate causal model of the target process, the Role-Behavior modeling method is developed to represent the knowledge of modularized process units. In this modeling method, Fault-Behavior model and Structure-Role model present the relationship of the internal behaviors and faults in the process units and the relationship between process units respectively. Through the multiple modeling techniques, the knowledge is separated into what is independent of process and dependent on process to provide the extensibility and portability in model building, and possibility in the automatic synthesis. By taking advantage of the Role-Behavior Model, an algorithm is proposed to synthesize the plant-wide causal model, Fault-Causality Graph (FCG) from specific Fault-Behavior models of the each unit process, which are derived from generic Fault-Behavior models and Structure-Role model. To validate the proposed modeling method and algorithm, a system for building FCG model is developed on G2, an expert system development tool. Case study such as CSTR with recycle using the developed system showed that the proposed method and algorithm were remarkably effective in synthesizing the causal knowledge models for diagnosis of chemical processes.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.209-213
• /
• 1997

Manual lifting techniques are commonly defined in terms of the postures adopted at the start of the lift. Quantitative definition is problematic, however, because the absolute joint angles adopted to lift an object are influenced by task parameters, such as the initial height of the load. The main objective of this study is to investigate the grip strength of the both hands at the initial lifting points. The survey is conducted by measuring the compression force, anthropometric data and grip strength at the lifting postures for the subjects(n=50) who is assigned to their job as usual. The experiment is peformed at the four lifting postures which involving the combination of two horizontal factors(H1 : 35 cm, H2 : 55 cm) and two vertical factors(V1 : 20~80 cm, V2 : 47~102 cm). The analysis result of lifting posture indicated that each H1-V1, H2-V1 combinations are about 60$^{\circ}$ and each H1-V2, H2-V2 combinations are about $30^{\circ}$. There are significant differences on grip strength between $60^{\circ}$ and $30^{\circ}$ stooped posture. The results of this study can be provided a method defining lifting postures at the minimum grip strength. Also, it is eliminated a hazard of the injuries which are cumulative trauma disorders(CTDs) and back pain, increased a productivity and improved a welfare of workers.