• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.61-61
• /
• 2010

The purpose of this study is to prevent the unstable fracture at the FCA butt weldment of hatch coaming deck in the ultra large containership during service life. In order to do it, the behavior of the embedded crack at the weldment under design loading conditions was evaluated in accordance with BS7910. Here, the level of primary stress induced by ship motion was evaluated by the design code of classification society and FEA. The level of residual stress as secondary stress was calculated in consideration of the restraint degree of weldment and welding heat input by using the predictive equation proposed by authors in the previous study. The fatigue crack growth rate at the weldment was evaluated using CT specimen in accordance with ASTM E647. According to the results, although the allowable defect for embedded crack specified in the classification society exists at the weldment, the occurrence possibility of unstable fracture at the weldment could not be negligible, regardless of CTOD value given in this study. So, in this study, the effect of initial defect size, welding heat input, restraint degree and CTOD on the fracture mechanical characteristics of embedded crack at the weldment was evaluated by the comprehensive fracture assessment. Based on the results, the design criteria including allowable defect, residual stress level and CTOD value was established to prevent the unstable fracture at the FCA butt weldment of hatch coaming deck in an ultra large containership during service life of 20years.

• Journal of Ship and Ocean Technology
• /
• v.3 no.4
• /
• pp.35-51
• /
• 1999

Fatigue strength assessment procedures have been implemented in the ship design rules by many classification societies. However, a large variation tin the details of the different approaches exists in practically all aspects influding load history assessment, stress evaluation and fatigue strength assessment. In order to assess the influences of thesd variations on the prediction of fatigue lives. a comparative study is organized by the ISSC Committee III.2 Fatigue and Fracture. A pad detail on the top of longitudinal hatch coaming of a panamax container vessel is selected for fatigue calculation. The work described in this paper is one set of results of this comparative study in which the ABS dynamics approach is applied. Through this analysis the following conclusions can be drawn. (1) With the original ABS approach, the fatigue life of this pad detail is very low, only 2.398 years. (2) The treatment of the stillwater bending moment in the ABS approach might be a source of conservatism. If the influence of stillwater bending moment is ignored, then the fatigue life for this pad detail is 7.036 years. (3) The difference between the nominal stress approach and the hot spot stress approach for this pad detail is about 26%.

• 한국기계연구소 소보
• /
• s.14
• /
• pp.157-168
• /
• 1985

In cargo vessels, hatch covers are used to prevent sea water from penetrating into the cargo hold and to keep the vessels buoyant. And also they can be used as cargo loading devices as in container ships. In this paper, hatch covers are classified according to their operation method and their characteristics are briefly demonstrated. Systematic description on the scantling of the hatch cover panel and how to determine the capacity of the hydraulic power system fir folding hatch cover panels are also presented. The hydraulic power system is selected from the result of dynamic analysis of the movements of the hatch cover panels when stored on the upper deck. The hatch coaming height is determined as shortly as the hydraulic cylinders can be installed. This study deals with the hatch cover system of the medium sized multi-purpose cargo vessel, but the results of this study can be applied to large-sized cargo vessels with a slight change of the input data in the calculations. Further research on the high pressure pump, hydraulic cleating system and hydraulic piping will realize domestic production of the whole hatch cover system which have been supplied from foreign makers until now

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.33-35
• /
• 2004

선박건조의 탑재공정에 있어서 용접장이 긴 후판 맞대기 용접에는 SAW가 대부분 적용되고 있지만 컨테이너 운반선의 UPPER DECK나 HATCH COAMING TOP PLATE 같은 경우 용접장이 짧고 작업공간이 협소하여 SAW가 적용되지 못하고 있다. (중략)

• Journal of Welding and Joining
• /
• v.34 no.4
• /
• pp.28-33
• /
• 2016

The purpose of this study is to evaluate the redistribution of transverse residual stress in the multi-pass FCA butt weld of YP47 in the hatch coaming top plate of ultra large size containership under the tensile cyclic load. In order to do it, the configuration of modified H type specimen including restraint length was first designed to simulate the restraint condition of the butt weld in hatch coaming top plate. FE analysis procedure for evaluating the transverse residual stress was verified by comparing the calculated mean and surface residual stresses with the measured results in the test specimen. After that, the effect of the cyclic load on the redistribution of transverse residual stress was evaluated by comprehensive FEA. From the results, it was found that although the maximum transverse residual stress decreased with an increase in the applied maximum load, the effect of the cyclic load on the mean residual stress is small enough to be negligible. It is because the maximum stress of the ship corresponding to the probability of 10E-8 is less than 70% of yield stress of the weld.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.10 no.1
• /
• pp.21-26
• /
• 1973

A simple matrix method to analyze the ship's transverse frame ring is proposed. In this approach, the frame ring is treated as a plane frame of uniform slender members. The loadings on the frame consist of buoyancy loads, deck loads and cargo loads. The hatch coaming are considered to deflect under the loads. Because of symmetry, only the half of the frame is analyzed. The method is to obtain the forces and moments on each member. The deformation of the frame can be determined from the nodal displacements. For a sample calculation, a frame ring of a 10,000 ton class cargo liner is analyzed on the IBM 1130 computer. The numerical results obtained are proved to be resonable.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.69-77
• /
• 2000

This study was a part of FSA study which was initiated by IMO and was applied to hatchway watertight integrity of bulk carriers. Hazards which were involved in high risk level were identified as follows. Ship Operation out of Design Criteria(Hatch Coaming Damage) and Poor Maintenance & Inspection(Securing Arrangement Damage). The potential risk was calculated by risk analysis and risk control option was made to reduce potential risk. The potential risk was about U$60,000/ship-year and could be reduced to about U$30,000/ship-year by applying RCO 1(Advanced system directly related to Hatchway Security). In addition, effectiveness of RCOs was shown by cost benefit assessment.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.62-66
• /
• 2010

The goal of this work is to establish the reliability of FCA welded joints for high strength EH36-TMCP ultra thick plate. For this, heat conduction and thermo elasto-plastic analyses have been conducted on a multi-pass, X-groove, butt-joint model to clarify the thermal and mechanical behavior (residual stresses, magnitude of the stresses, and their production and distribution mechanisms) of the weld joint. In addition, the results of the welding residual stress obtained from thermo elasto-plastic analysis was verified and compared with results obtained by XRD analysis.

• Journal of Welding and Joining
• /
• v.28 no.4
• /
• pp.33-40
• /
• 2010

The purpose of this study is to establish a predictive equation of transverse residual stress at the thick FCA butt weldment of large container vessel. The variables used were restraint degree, yield strength of base material, thickness of weldment and welding heat input. Restraint degree at the thick weldment of container ship having the various welding sequence was calculated using FEA. From the result, the H-type specimen was designed to reproduce the level of restraint degree at the actual weldment of containership. Based on the results, the predictive equations of the mean value and the distribution of transverse residual stress at each location of the weldment were established using dimensional analysis and multiple-regression method. The predictive equations were verified by comparing with those measured by XRD in the actual weldment of the ship.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.126-137
• /
• 2020

This study collected and analyzed the fishing process of existing fishing boat and newly built fishing boat by using the video observation methods to understand the improvement of fishing operation efficiency and safety according to the scale change of coastal composite fishing boat. The fishing operation efficiency was calculated by analyzing the frequency of movement, the movement distance and the moving time per basket used in the fishing process to derive the improvement of the newly built fishing boat compared to the existing fishing boat. It was confirmed that the mean frequency of movements decreased to 13.9%, the average moving time decreased to 21.8%, the mean movement distance increased to 20.5% and the movement through the top of gunwale did not occur. Movement of frequency, increased and time according to the fishing operation were directly affected by the width of side passages and the presence or absence of walking obstruction such as bulwark stay, hatch coaming and fishing gears on deck. The results of this study are expected to be used as basic data for redesigning into a safe and efficient coastal composite fishing boat in the future.