• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.744-751
• /
• 1993

A prototype motorised hand-held mango harvester was designed and fabricated at the faculty of Engineering , University of Agriculture Malaysia. The harvester is aimed at reducing the harvesting operation time, improving the working comfort during the operation and increasing the harvesting capacity. The mango harvester consists of gripping and detaching devices, a power transmission shaft with a 12 V battery operated motor and an aluminium pole together with a collecting chute. Preliminary observation on the harvester's performance showed significant and satisfactory results. It was found out that the magno harvester was capable of harvesting on an average six seconds for each fruit detachment. Further study is being conducted to improve the efficiency and capacity of the mango harvester.

• Smart Structures and Systems
• /
• 제10권3호
• /
• pp.299-312
• /
• 2012

The authors' research efforts recently led to the development of a customized wireless control unit which receives the real-time feedbacks from the sensors, and elaborates the consequent control signal to drive the actuator(s). The controller is wireless in performing the data transmission task, i.e., it receives the signals from the sensors without the need of installing any analogue cable connection between them, but it is powered by wire. The actuator also needs to be powered by wire. In this framework, the design of a power management unit is of interest only for the wireless sensor stations, and it should be adaptable to different kind of sensor requirements in terms of voltage and power consumption. In the present paper, the power management efficiency is optimized by taking into consideration three different kinds of accelerometers, a load cell, and a non-contact laser displacement sensor. The required voltages are assumed to be provided by a power harvesting solution where the energy is stored into a capacitor.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.199-201
• /
• 2016

Wireless sensor networks offer an attractive solution to several environments, security, and process monitoring problems. However, one barrier for their full adoption is the need to provide electrical power over extended periods of time without the need of dedicated wiring. Energy harvesting offers good solutions to this problem in several applications. This paper surveys the energy requirements of typical sensor network nodes and summarizes the future research work in the field of energy harvesting resource allocation in wireless sensor networks.

• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1691-1696
• /
• 2013

본 논문에서는 순환형 하이브리드 초소형 에너지 수확장치 장치에서 존재하는 거동해석을 수행한다. 이 거동해석은 더 많은 에너지를 생산하기 위해서 비선형 시스템이 요구되므로 비선형 시스템의 존재 유무를 확인하는 것이다. 이를 위해 먼저 타켄스의 매립법을 통한 위상 공간을 재구성한다. 또한 위상 공간을 이용하여 포엔카래 맵을 구성하고 리아프노프 지수를 구하여 분석한다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.698-706
• /
• 2000

It is very difficult to mechanize tomato harvesting because identifying a tomato partly covered with leaves and stalks is not easy. This research was conducted to develop tomato harvesting robot which can identify a target tomato, determine its three dimensional position, and harvest it in a limited time. Followings were major findings in this study. The first visual system of the harvesting robot was composed of two CCD cameras, however, this could not detect tomatoes which are not seen on the view finder of the camera especially those partly covered by leaves or stalks. The second visual device, combined with two CCD cameras and pan/tilt procedures was designed to minimize the positioning errors within ${\pm}10mm$, but this is still not enough to detect tomatoes partly covered with leaves etc. Finally, laser distance detector was added to the visual system that could reduce the position detecting errors within 10mm in X-Y direction and 5mm in Z direction for the partly covered tomatoes.

• Journal of Biosystems Engineering
• /
• 제37권1호
• /
• pp.65-74
• /
• 2012

Purpose: An autonomous robot was developed for harvesting strawberries cultivated in bench-type systems. Methods: The harvest robot consisted of four main components: an autonomous vehicle, a manipulator with four degrees of freedom (DOF), an end effector with two DOFs, and a color computer vision system. Strawberry detection was performed based on 3D image and distance information obtained from a stereo CCD color camera and a laser device, respectively. Results: In this work, a Cartesian type manipulator system was designed, including an intermediate revolute axis and a double driven arm-based joint axis, so that it could generate collision-free motions during harvesting. A DC servomotor-driven end-effector, consisting of a gripper and a cutter, was designed for gripping and cutting the strawberry stem without damaging the strawberry itself. Real-time position tracking algorithms were developed to detect, recognize, trace, and approach strawberries under natural light conditions. Conclusion: The developed robot system could harvest a strawberry within 7 seconds without damage.

• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.33-38
• /
• 2015

PURPOSES : The purpose of this paper is to investigate the application of thermoelectric technology to concrete structures for harvesting solar energy that would otherwise be wasted. In various fields of research, thermoelectric technology using a thermoelectric module is being investigated for utilizing solar energy. METHODS: In our experiment, a halogen lamp was used to produce heat energy instead of the solar heat. A data logger was used to record the generated voltage over time from the thermoelectric module mounted on a concrete specimen. In order to increase the efficiency of energy harvesting, various factors such as color, architecture, and the ability to prevent heat absorption by the concrete surface were investigated for the placement of the thermoelectric module. RESULTS : The thermoelectric module produced a voltage using the temperature difference between the lower and upper sides of the module. When the concrete specimen was coated with an aluminum foil, a high electric power was measured. In addition, for the power generated at low temperatures, it was confirmed that the voltage was generated steadily. CONCLUSIONS: Thermoelectric technology for energy harvesting can be applied to concrete structures for generating electric power. The generated electricity can be used to power sensors used in structure monitoring in the future.

• Journal of Biosystems Engineering
• /
• 제26권1호
• /
• pp.11-20
• /
• 2001

Experiments under the stationary and harvesting condition, were performed in order to investigate the vibration characteristics of a head-feeding combine. 6 degrees of freedom components of acceleration at the location of the center of the gravity, and 3 degrees of freedom components of acceleration at the location of the operator seat were measured independently. The vibration characteristics of the combine were estimated with the power spectral density of the time series data of accelerations. From this research, the following results were obtained. 1. Vibration of a head-feeding combine under the stationary condition(engine, thresher and cutter are driven without harvesting) is mainly influenced by the engine. Further, 1/3, 1/2 (sub-harmonic) frequency components of the engine are observed besides engine driving frequency component(45Hz). 2. Vibration of a head-feeding combine under the harvesting condition is influenced by the engine, threshing unit and driving unit. Namely, some kinds of vibration frequency components in harvesting are observed compared with stationary condition. Further, sub-harmonic frequency components of the engine are observed besides engine driving frequency component as same as stationary condition. From these results, it may be concluded that vibration of a head-feeding combine is characteristics of semi-periodic and nonlinear vibration.

• ETRI Journal
• /
• 제45권3호
• /
• pp.519-533
• /
• 2023

This paper implements a simultaneous solar and thermal energy harvesting system, as a hybrid energy harvesting (HEH) system, to convert ambient light into electrical energy through photovoltaic (PV) cells and heat absorbed in the body of PV cells. Indeed, a solar panel equipped with serially connected thermoelectric generators not only converts the incoming light into electricity but also takes advantage of heat emanating from the light. In a conventional HEH system, the diode block is used to provide the path for the input source with the highest value. In this scheme, at each time, only one source can be handled to generate its output, while other sources are blocked. To handle this challenge of combining resources in HEH systems, this paper proposes a method for collecting all incoming energies and conveying its summation to the load via the current mirror cells in an approach similar to the maximum power point tracking. This technique is implemented using off-the-shelf components. The measurement results show that the proposed method is a realistic approach for supplying electrical energy to wireless sensor nodes and low-power electronics.

• 한국약용작물학회지
• /
• 제23권5호
• /
• pp.395-399
• /
• 2015

Background : This study examined the effect of harvesting time on the growth, yield characteristics, and major beneficial components in Salvia miltiorrhiza. Methods and Results : Although plant height, stem diameter and branch length were not affected by harvesting time, the number of stems was highest when harvested in mid October. There were no differences in root length and thickness, however, the rhizome was thicker when it was harvested at the end of October or early November than when it was harvested in early and mid October. The dried root weight also showed a similar pattern. However, there was a statistically significant increase to 408 kg (16%) in the rhizome weight when in late October and a rise to 455 kg (29%) when harvested in early November. Harvest time had little effect on the content of the major component of S. miltiorrhiza. For example, salvianolic acid content rose from 9.42 to 9.64% with later harvest times, and tanshinone ${\prod}A$ content was tended to be slightly more increased in mid October which S. miltiorrhiza has 0.22% tanshinon ${\prod}A$ than in early October. Conclusions : According to these results, the optimum harvest time for S. miltiorrhiza is early November when plant or major component yields are hightest. There were no significant harvest time effects on the major beneficial components.