• Membrane Journal
• /
• v.24 no.1
• /
• pp.31-38
• /
• 2014

Rainwater harvesting is a process by which rainwater collected from rooftop or other catchment is purified so that the water can be directly or indirectly used by human beings for beneficial uses. As rainwater is increasingly considered for high quality purposes, membranes have gained an important place in rainwater treatment. It has advantages such as the production of high quality water, small footprint, and affordable energy consumption. Nevertheless, membrane fouling is regarded as a serious problem similar to the cases of water treatment and wastewater reclamation. In this study, we applied microfiltration (MF) membranes for rainwater treatment. In addition, a low pressure ultraviolet (UV) process was also use as a pretreatment to control notonly. To quantify the effect of UV on organic matters, both total organic carbon (TOC) and UV absorbance (UVA) were measured. Moreover, the effect of UV pretreatment on membrane fouling was investigated. Experimental results indicated that the pretreatment of membranes using LPUV was effective to control fouling of MF membranes only when the rainwater was contaminated by algae. This was attributed the reduction and modification of organics after UV treatments. It is likely that the UV/MF process is a promising option for water treatment in decentralized water treatment such as micro water grid systems.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.292-304
• /
• 1993

This research developed a forest-level harvest scheduling model using linear programming (LP). The formulations of the LP model include timber production schemes with constraints of nondecling yield forest conversion strategies, the minimum timber supply, levels and the maximum cut acrages. The model is able to generate both Model I and Model II types of input matrix in MPS format. In this paper, use of LP in building the framework of the strategic forest planning model was justified by comparing the algorithmic characteristics of LP with those of Gentan probability and binary search approaches through literature reviews. In order to demonstrate the field applicability of the model proposed. (1) the harvest scheduling problem for about 11,000-hectare case study area (Mt. Baekun area in Southern Experimental Forest of Seoul National University) was formulated and soloed and (2) the effects of the change in task regulatory timber production constraints or. optimal harvesting schedules here investigated.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.17-27
• /
• 2022

In this paper, ED-H algorithm, an optimal real-time scheduling algorithm dealing with the characteristics of the integrated energy harvester system with a capacitor, is extended to satisfy the time constraint under the blackout state which is a deliberate power-off state by an intelligent power management unit adopted in the system. If the power supply system does not have enough energy, it temporarily shuts off the power supply to protect the circuit and capacitor and resumes the supply again when the capacitor is fully charged, which may delay the task execution during these blackout states by calculating the time according to the occurrence of the events. To mitigate the problem, even if task execution is delayed by the original ED-H algorithm, the remaining time of the subsequent time units no longer can afford to delay the execution of the task is predicted in the extended algorithm and the task is forced to be scheduled to meet the time deadline. According to the simulation results, it is confirmed that the algorithm proposed in this paper has a high scheduling performance increase of 0.4% to 7.7% depending on the characteristics of the set of tasks compared to the ED-H.

• Journal of Korean Society on Water Environment
• /
• v.34 no.1
• /
• pp.109-120
• /
• 2018

Sidestream in domestic wastewater treatment plants contains high concentration of ammonium, which increases nitrogen loading rate in the mainstream. The process for deammonification consisting of partial nitritation-anaerobic ammonium oxidation (ANAMMOX) and heterotrophic denitrification is an economical method of solving this problem. Currently, about 130 full-scale deammonification plants are fully operating around the world, but none is in Korea. In order to transfer the principal information about sidestream deammonification processes to researchers and operators, we summarized basic concepts, processes type, and key influence factors (e.g., concentration of nitrogen compounds, dissolved oxygen (DO), temperature, and pH). This review emphasis on the processes of single-stage sequencing batch reactor (SBR) deammonification, which are widely used as full-scale plants. Since simultaneous processes of partial nitritation, ANAMMOX and heterotrophic denitrification occur in a single reactor, the single-stage SBR deammonification requires appropriate control/monitoring strategies for several operating factors (DO and pH mostly) to achieve efficient and stable operation. In future, AB-process consisting of A-stage (energy harvesting from organics) and B-stage (ammonium removal without organics) will be applied to the wastewater treatment process. Thus, we suggest mainstream deammonification for B-stage connected with the sidestream deammonification as seeding source of ANAMMOX. We expect that many researchers will become more interested in the sidestream deammonification.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.243.1-243.1
• /
• 2015

To replace the based on silicon solar cells, the third generation solar cells, Dye-sensitized solar cells (DSSCs), is low fabrication than silicon solar cells, environmentally friendly and can be applied to various field. For this reason, the DSSCs have been continuously researched. But DSSCs have one drawback that is the low power conversion efficiency (PCE) than silicon solar cells. To solve the problem, we used the backr-eflector the Al foil that can be easily obtained from the surrounding in order to improve the efficiency of the DSSCs. Easily detachable Al foil back-reflector increases the photocurrent by enhancing the harvesting light because the discarded light is reused. It also leads to enhance the power conversion efficiency (PCE). In addition, we compared with the efficiency of the DSSCs that is applied and does not be applied with back-reflector according to the thickness of the TiO2 photoelectrode. When the back-reflector is applied to DSSCs, the photocurrent is increased. It leads to affect the efficiency. We used to solar simulator and Electrochemical Impedance Spectroscopy (EIS) to confirm the PCE and resistance. The DSSCs were also measured by External Quantum effect (EQE). At the same time, FE-SEM and XRD were used to confirm the thickness of layer and crystal structural of photoelectrode.

• Archives of Plastic Surgery
• /
• v.33 no.5
• /
• pp.643-647
• /
• 2006

Purpose: The transverse rectus abdominis myocutaneous(TRAM) flap has become a mainstay of breast reconstruction. The chief disadvantage of the TRAM flap is its potential to create a weakness in the abdominal wall. Nowadays true hernia is less frequent, but bulging that appears at the muscle donor site, or at the contralateral side, or at the epigastric area is still remained as a problem. To prevent this complications, we have used synthetic mesh as well as abdominal muscle plication. Now we report the result of our methods. Methods: We started to use synthetic mesh and muscle plication as supplementary reinforcement for entire abdominal wall, after TRAM flap harvesting, in an attempt to stabilize it and achieve a superior aesthetic result since 2002. We observed complications of TRAM flap donor site, and compared our results (from January, 2002 to January, 2006) with other operator's result (before 2001) at the same hospital in aspect of incidence of abdominal complications. Results: 42 consecutive patients have been performed routine reinforcement with the extended mesh technique and muscle plication from January, 2002 to January, 2006. Mean patient follow up was 25.2 months. No hernia or mesh related infection were encountered and only one patient had a mild abdominal bulging. Nevertheless the our good results, there were no significant statistical differences were observed between two groups. Conclusion: We recommend the using of synthetic mesh and muscle plication for donor site reconstruction after TRAM flap breast reconstruction to improve strength as well as aesthetic quality of the abdominal wall.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.100-105
• /
• 2017

In this paper, we study an interference avoidance scenario in the presence of a interferer which can rapidly observe the transmit power of backscatter communications and effectively interrupt backscatter signals. We consider a power control with a sub-channel allocation to avoid interference attacks and a power-splitting ratio for backscattering and RF energy harvesting in sensors. We formulate the problem based on a Stackelberg game theory and compute the optimal transmit power, power-splitting ratio, and sub-channel allocation parameter to maximize a utility function against the interferer. We propose the utility maximization using Lagrangian dual decomposition for the backscatter communications and the interferer to prove the existence of the Stackelberg equilibrium. Numerical results show that the proposed algorithms effectively maximize the utility, compared to that of the algorithm based on the Nash game, so as to overcome a malicious interference in backscatter communications.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.15-18
• /
• 2011

Purpose: The anterior iliac crest is a common source for autologous cancellous bone graft. For patients who have previously received cancellous bone grafts from bilateral anterior iliac crests, there may be concerns of whether a sufficient quantity of autologous cancellous bone remains for additional grafts without harvesting it from other sites, such as the posterior iliac crest. Methods: We experienced 3 cases of reharvesting in 2 patients. The diagnosis of the first patient was bilateral facial cleft number 3. This patient received bilateral side cleft alveoloplasty with corticocancellous bone graft from the both anterior iliac crest respectively by a previous surgeon. This patient then needed reharvesting of the anterior iliac crest cancellous bone to correct an ongoing skeletal problem for the bilateral cleft. The other patient had bilateral incomplete cleft of the primary palate. This patient received left side cleft alveoloplasty with cancellous bone graft from the right anterior iliac crest. Before the patient could receive the alveoloplasty on the other side, a radial head osteotomy and cancellous bone graft was performed by orthopedic surgeons who then used the remaining left iliac crest in order to treat a pulled elbow. For the completion of the right side cleft alveoplasty, the anterior iliac crest cancellous bone needed to be reharvested. Prior to the reharvesting, a preoperative computed tomography scan of the pelvis was obtained to assess the maturity of the donor site regeneration. The grafts were then taken from site where a greater amount of regeneration was evident. Results: Long term follow ups showed that the grafts were successfully taken. This sufficient volume was obtainable 14 months after the first harvest. Conclusion: Satisfactory results were achieved after the reharvesting of iliac cancellous bone. Thus, it appears that the reharvesting of the iliac bone is a possible alternative to multiple site grafting, use of allograft or bone substitute materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.466.2-466.2
• /
• 2014

The Quantum dot (QD) solar cells have been under active research due to their high light harvesting efficiencies and low fabrication cost. In spite of these advantages, there have been some problems on the charge collection due to the limitation of the diffusion length. The modification of advanced nanostructure is capable of solving the charge collection problem by increasing diffusion length of electron. One dimensional nanomaterials such as nanorods, nanowires, and nanotubes may enhance charge collection efficiency in QD solar cells. In this study, we synthesized $TiO_2$ anatase nanorod arrays with length of 200 nm by two-step sol-gel method. The morphology and crystal structure for the nanorod were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The anatase nanorods are single-crystalline and possess preferred orientation along with (001) direction. The photovoltaic properties for the heterojunction structure QD solar cells based on the anatase nanorod were also characterized. Compared with conventional $TiO_2$ nanoparticle based QD solar cells, these nanostructure solar cells exhibited better charge collection properties due to long life time measured by transient open circuit studies. Our findings demonstrate that the single crystalline anatase nanorod arrays are promising charge transport semiconductors for heterojunction QD solar cells.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.175-182
• /
• 2018

As Internet of things with a large number of nodes emerges, wireless-power communication networks (WPCN) based on a random access protocol needs to be investigated. In the random access-based WPCN, a terminal accessing later in given random access (RA) slots can harvest more energy before transmission and thus can transmit data with higher power and achieve higher throughput if the access is successful. On the basis of this property, the proposed random access control protocol gives the terminals priority and distinguishes the RA slots according to the priority level, so that a near terminal with access point allows to access preferentially other than a remote terminal. This operation decreases the throughput of near terminal and increases the throughput of remote terminal, and then, the doubly near-far problem in WPCN is resolved and the user fairness is improved. Results show that the proposed random access control improves both channel throughput and user fairness according to the priority level.