• Journal of Forest and Environmental Science
• /
• v.27 no.3
• /
• pp.195-203
• /
• 2011

Forest in the our country is in the age that needs positive operation in order to foster economical forest. Multiple operations for making valuable forest should be conducted steadily and timely from afforestation to harvesting. In order to execute these kinds of forest operations, the construction of skid trail network that can be effectively used as a pathway for forestry machine and working space is necessary. To investigate facility effect of skid trail network, we executed the location of skid trail network through centroid method by GIS for 50ha of harvesting workplace in mechanized model forest located in Hongcheon, Gangwon Province. As a result of this research, skid trail density in this area changed from 79m/ha with current method to 42m/ha with improved method. It appeared that skid trail density with improved method is nearly half of current method even though the cutting area is the same as the current cutting area. Also, skidding distance changed from 117m with current method to 57m with improved method. It appears that skidding distance with improved method is nearly half of current method even though cutting area was enlarged in adjacent tending cutting area.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.1
• /
• pp.16-23
• /
• 2017

This study aimed to determine the optimal harvesting time for covered barley to make grain silage, in Honam region of Korea. We harvested six varieties of barley every third day from 24 to 42 days after heading (DAH). The moisture content decreased from 62.4% at 24 DAH to 24% at 42 DAH. The moisture content at 36 DAH was 44.3%; however, moisture content at 39 and 42 DAH was lower than 40%. Yield of covered barley significantly increased from 24 to 42 DAH (p < 0.05). Yield at 36 DAH (557 kg/10a) was not significantly different from that at 39 and 42 DAH (p < 0.05). With respect to the feed value of barley grain silage, the amount of crude fiber and crude ash was different by harvesting time (p < 0.05). However, the amount of crude protein, crude fat, and total digestible nutrients (TDN) from 24 and 42 DAH was not significantly different. The pH of grain silage from 24 to 42 DAH was between 3.8 and 4.2 and it was stable until 36 DAH (p < 0.05). However, the pH of grain silage at 39 and 42 DAH was 5.2 and 5.8, respectively, which was higher than the pH of silage with good fermentation quality. The lactic acid content of barley grain silage from 24 to 42 DAH decreased from 5.5% to 0.5% (p < 0.05). The amount of lactic acid at 36 DAH was higher than that at 39 and 42 DAH (p < 0.05). With respect to moisture content, yield, feed value, and fermentation, the optimal harvesting time for grain silage of covered barley was 36 DAH. This could increase the use efficiency of harvesting machine for barley and reduce the harvesting time gap between whole barley silage and grain silage in Korea. Moreover, using barley grain silage for animal feed could reduce the import of corn.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.425-431
• /
• 2014

Most fields in highland areas are covered with rye or hairy vetch for conservation during a fallow. However, using cover crops needs an effort to sow, and this makes top soil more vulnerable to loss due to surface disturbances. The aims of this study were to develop an automatic seeding-regulator device using a low-price, extensive-use GPS sensors and a DC motors and to evaluate a working efficiency of it after adaptation to partial tillage machine for reducing seeding effort. The amount of runoff water and soil loss was evaluated with partial tillage and simultaneous-seeding after harvesting soybean, in 17% slope lysimeters. In results, the seeding amount with the machine speed was stable between $0.5{\sim}0.8m\;s^{-1}$ of working sections. The automatic control device of seeding-rate could be enough to solve the slip problems of power selecting supply system or five four-wheel drive device. In partial tillage and simultaneous seeding, runoff water was 11.6% ($1.8m^3ha^{-1}$) of the scatter-seeding control ($15.5m^3ha^{-1}$) and soil loss was 13.2% ($7kg\;ha^{-1}$) of the scatter-seeding control ($53kg\;ha^{-1}$). These results suggest that partial tillage and simultaneous-seeding methods are very effective in decreasing work effort and soil loss of sloped land.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.283-292
• /
• 2017

Purpose: Japanese Apricot, a type of plum, has various medicinal and economical applications. Plums are quite popular worldwide, but their deseeding remains a serious impediment to their processing. Therefore, a plum (Japanese Apricot) seed remover (PSR) was developed that can use various types of cutters according to the purpose of the plum processing, and its performance was evaluated. Methods: The proposed PSR, which allows multipurpose cutters, namely, zero-, two-, and four-blade cutters, to be installed, was first designed and manufactured. To identify appropriate parameters related to the cutting pressure, plums were harvested from three regions during three harvesting periods, and their geometrical and mechanical properties were measured. After application of the parameters related to the cutting pressure, a performance test was carried out on both fresh and frozen plums by identifying the ratios of the flesh recovery, seed recovery, seed breakage, deseeding efficiency, and machine efficiency. Results: The results show that, using the proper calculation of the processing parameters, 100% deseeding efficiency was facilitated regardless of the type of cutter used. However, in the case of a four-blade cutter, there are significant differences in the flesh recovery ratio according to the plum setting angle. Between the fresh and frozen plums, all cutters showed a significantly better flesh recovery ratio for the case of fresh plums. Conclusions: This machine will advance the plum processing technology, and eventually help the plum industry flourish.

• Korean Journal of Agricultural Science
• /
• v.19 no.2
• /
• pp.238-268
• /
• 1992

Since rural people migrated to urban area as a result of rapid industrialization in Korea, a significant proportion on agricultural labor farces has consistently reduced and therefore incurred labor shortage in rural area which might aggravate the farm household's economy. This sutdy suggests a long run plan of supplying agricultural machines for forage cultivation based on the survery of 102 livestock farm housecholds conducted in 1987, aimed at curtailing the labor costs which would contribute to improving the livestock farming management. The results of this study are as follows: 1. Among the 102 livestock farm household surveyed, 50 farm housecholds were found to cultivate 398a of grassland on average while other 52 farm households produced the forage on the 169a of land under cultivation averagely. 2. Over 50 percent of farm houseolds were reported to have their own agricultural machine for harvesting and cutting, however rates of mechanization in other operations such as mowing and sowing were less than 20 percent. 3. There were more than 50 percent of livestock farm households who have shown their intention to buy and operate their own farming machines when proprer opportunities are given. 4. In order to estimate the long-run demand for agricultural machines for livestock farm household considering current mechanization procedure, data for the machine's optimal capacty, growth of arable acreage for feed stuffs was collected and analyzed. 5. Based on the estimated demand, long range supply plan of livestock farming machines for the period of 1990-2010 was suggested. 6. Finally, measures for technological developement and finanacial support were suggested to implement so as to encourage the farmers' adoption of agricultural machines, and to achieve the goal of mechanization planning for the livestock farm household.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.1-6
• /
• 2006

The purpose of this study is to develop to portable near infrared analyzer measuring the sugar content of the fruits on a tree before harvesting ones. The portable near infrared system consists of a tungsten lamp, a coaxial optical fiber bundle and a multi-channel detector, which has 256 pixels and a concave transmission grating. Reflectance NIR spectra of orange were recorded by using a coaxial optical fiber bundle. The spectra were collected over the spectral range $400{\sim}1100nm$. Partial least squares regression(PLSR) was applied for a calibration and validation for determination of sugar contents. The multiple correlation coefficient was 0.99 and standard errors of calibration(SEC) was 0.069 brix. The calibration model predicted the sugar content for validation set with standard errors of prediction(SEP) of 0.092 brix. The sugar content in fruits was successfully quantified using the portable near infrared analyzer.

• Journal of Biosystems Engineering
• /
• v.24 no.3
• /
• pp.225-234
• /
• 1999

This study was performed as a basic research for establishing an objective quality evaluation method on whole bulbs of garlic. The size of a whole bulb of garlic, the number and the uniformity of complete individual garlics, and the existence of bad individual garlics in the whole bulb of garlic were selected as quality grading factors. Quality discrimination algorithms with machine vision techniques were developed and verified for the four factors based on morphological and physical features of whole bulbs of garlic. Based on the results, the size discrimination by the projected area of a whole bulbs of garlic suggested four grading levels and the algorithm for predicting the number of complete individual garlics based on the peaks on its projected boundary showed ${\pm}$0.78 prediction error. In addition, the uniformity represented by coefficient of variation could be divided into four levels, but the algorithm for discriminating the existence of bad individual garlics in a whole bulb of garlic was not effective.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.178-185
• /
• 1993

The standard of agricultural mechanization is one of the important indicators for measuring the realized degrees of agricultural modernization in some regions. The Pearl river delta is most fertile, and thereby reputed as a land of fish and rice in the province. Studying the proceedings, profits and experiences of agricultural mechanization in the region obviously possesses the generally guiding significance for Guangdong to realize agricultural modernization by the year 2010. this paper involves these fields such as duainage, irrigation, harrowing, harvesting, transportation, processing and etc, in the Pearl River Delta, Results show as follows: (1) 80% work load in main production links has been mechanized ; (2) changed took place in traditionally agricultural production means and ways so took place in traditional agricultural production means and ways so that individual farmer in this region became commercial producer and then march toward commodity production of moderniza ion with high yields, good guality and high profits ; (3) further taping production potential to improve land output and labour productivity. Results also show that the degrees of agricultural mechanization in the Pearl River Delta are closely related to government' spolices, finance, moderate land scale management, rural industrialization and machine utility as well as talent training, shortage of which will surely; affect the proceeding of agricultural mechanization. Therefore, government must be urged to guarantee it by preferential policies and financial loan so as to greatly run rural industry, to create conditions for land scale management, to set up the socialized service system of agricultural mechanization, to actively train scientific talents and to introduce advanced equipments and technology from aborad in order to quicken the progress of agricultural mechanization in this regions.

• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.376-382
• /
• 2022

A triboelectric nanogenerator (TENG) can obtain electrical output due to the reciprocal motion between two objects (i.e., rubbing), in which repetitive contact is made. High reliability, stable output, and high reproducibility are important aspects of the electrical output obtained through a TENG as a sensor or generator, thus enabling its meaningful use. Therefore, many researchers fabricated TENGs into individual parts in the form of one module type to obtain high reproducibility and reliability. Since a TENG manufactured as a module type operates as a single device, it is possible to collect kinetic energy and convert it into electrical energy through the interaction between internally configured elements without the need for a separate structure. In addition, it is relatively easy to apply the size to the body, machine tools, and natural environment by simply adjusting the size suitable for use and surrounding environmental conditions. In this paper, the application cases of module-type TENGs are divided into four areas, and the research progress of module-type TENGs in each area is extensively reviewed.

• Journal of Haehwa Medicine
• /
• v.13 no.2
• /
• pp.187-196
• /
• 2004

Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.