• The Korea Journal of Herbology
• /
• v.27 no.1
• /
• pp.41-49
• /
• 2012

Objectives : The purpose of this study was to investigate the anti-oxidative and anti-atopic dermatitis effects of persimmon leaf extract obtained from Cheongdo-gun, where more than 60% of Korean persimmon is produced. Methods : Anti-oxidative effects of the crude persimmon leaf extract harvested monthly between May and November were determined by in vitro assay using 1,1-diphenyl-2-picrylhydrazyl (DPPH) and superoxide dismutase (SOD)-like reaction. Anti-atopic dermatitis effects of the crude persimmon leaf extract were determined by using collagenase type I inhibition assay and by quantitative assays including serum histamine, prostaglandin E metabolite and leukotriene $B_4$ levels in animal model of atopic dermatitis using Balb/c mice. Results : Persimmon leaf extract harvested in May had higher levels of total phenolic compounds (182.24 mg/g) and flavonoids (23.05 mg/g) than the ones of different month extract. Also, persimmon leaf extract harvested in May showed the most effective extract scavenging activities of DPPH free radical ($13.39{\pm}0.21\;{\mu}g/ml$) and superoxide anion radical ($40.52{\pm}2.32\;{\mu}g/ml$), leading to use the persimmon leaf extract harvested in May for the experiments hereafter. Persimmon leaf extract showed $326.71{\pm}4.6\;{\mu}g/ml$ of 50% inhibitory concentration ($IC_{50}$) for collagenase type I which is responsible for the degradation of extracellular matrix. In addition, persimmon leaf extract application group could decrease serum levels of histamine, prostaglandin E metabolite and leukotriene $B_4$ compared to the negative control in animal model of atopic dermatitis. Especially, persimmon leaf extract showed a significantly decreased serum leukotriene $B_4$ level relative to the levels of histamine and prostaglandin E metabolite. Conclusions : Persimmon leaf extract showed anti-oxidative and anti-atopic dermatitis effects in vitro and in vivo. These results suggest that persimmon leaf extract may have immunoregulatory function for alleviating atopic dermatitis by decreasing collagenase activity and mast cell activation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.4
• /
• pp.409-415
• /
• 1988

This study was carried out to investigate the effects of barley straw application on the eluviation of components in submerged paddy soil percolated. The chemical components of soil, percolated water and humus fraction were as follows. $NH{^+}_4$-N in percolated water and soil, $NO{^-}_3$- N in soil were not detected after prime tillering stage by absorption of rice plant. Phosphate was not affected by the application but a little amount was eluviated through a whole period. Eluviation phase of $Ca^{{+}{+}}$ was similar to $Mg^{{+}{+}}$ and the changes of $K^+$, $Na^+$ and $Cl^-$ were almost same patterns, whereas the amount of these eluviated elements in plot applied was higher than non-applied. In the plot applied, eluviation of $SO{^{-2}}_4$ was low during the tillering stage but high after heading stage, whereas the whole amount of eluviation was high during the tillering stage. Eluviation of iron in the plot applied was increased rapidly. Humus type was almost same as type B in the plot applied or not after harvest, and contents of humic acid was about 60 percent.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.5
• /
• pp.442-448
• /
• 1993

The aims of the work were to examme the variability induced by EMS (ethyl methanesulfonate) mutagenesis of soybean plants, and to isolate mutants altered in nodulation and other growth characters. Seeds of two soybean cultivars, ‘Hwanggeumkong’ and ‘Baegunkong’ were treated with 30 and 50mM EMS(pH 7.0) for 6 hours and were planted directly in the field. Field emergency of$M_1 seed was averaged to be 61.0%, and frequency of plants with chlorophyll-deficient sectors of the first trifoliolate is about 0.7%. Regardless of varieties and does of EMS, $M_1 plant injury at harvest was present in plant height, pod and seed number per plant when compared to those of original-type soybean plants. The $M_2 variability of nodulation process induced by EMS treatment was found to be narrower than that of shoot dry weight. On the basis of the occurrence of chlorophyll-deficient plants, mutated cell frequency within $M_1 seed ranged from 5.3% to 84.2%, suggesting that mutation frequency on the $M_1 seed induced by EMS occurred partly and randomly regardless of varieties and doses of EMS. The putative mutant, which had more nodulation than original-type plant, was short in plant height. Sparse-nodulating soybean mutant was lower in leaf chlorophyll content and showed reduced growth.

• Journal of Biosystems Engineering
• /
• v.28 no.6
• /
• pp.517-524
• /
• 2003

There have been worldwide research and development efforts to automate various processes of bio-production and those efforts will be expanded with priority given to tasks which require high intensive labor or produce high value-added product and tasks under hostile environment. In the field of bio-production capabilities of the versatility and robustness of automated system have been major bottlenecks along with economical efficiency. This paper introduces a new concept of automation based on tole-operation, which can provide solutions to overcome inherent difficulties in automating bio-production processes. Operator(farmer), computer, and automatic machinery share their roles utilizing their maximum merits to accomplish given tasks successfully. Among processes of greenhouse watermelon cultivation tasks such as pruning, watering, pesticide application, and harvest with loading were chosen based on the required labor intensiveness and functional similarities to realize the proposed concept. The developed system was composed of 5 major hardware modules such as wireless remote monitoring and task control module, wireless remote image acquisition and data transmission module, gantry system equipped with 4 d.o.f. Cartesian type robotic manipulator, exchangeable modular type end-effectors, and guided watermelon loading and storage module. The system was operated through the graphic user interface using touch screen monitor and wireless data communication among operator, computer, and machine. The proposed system showed practical and feasible way of automation in the field of volatile bio-production process.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.281-287
• /
• 2016

Purpose: The purpose of this study is to develop a walking-type two-row sesame reaper, which can simultaneously perform the cutting and collecting of sesame plants and other crops like perilla and soybean. Methods: The factors involved in reaping sesame were determined experimentally in order to design a prototype of the sesame reaper. The prototype is made up of four parts for cutting, conveying, collecting, and running. The height of two disc-plate saw blades on the cutting part is adjusted by an adjusting wheel, and peripheral speed is adjusted in accordance with the running speed. The conveying belt of the conveying part can be tilted from $0^{\circ}$ to $90^{\circ}$. The collecting part extracts a predetermined amount of transferred sesame plants. The prototype was used to evaluate the performance at different working speeds, so that the work efficiency can be calculated. Results: The center of gravity of the sesame plants was 900 mm, measured from the end of the cut stem. The diameter of the disc-plate saw blade was determined to be 355 mm, peripheral speed was 20.4-32.7 m/s, and the picking height of the conveying belt for sesame was 130 mm. The performance of transfer and collection of the sesame, when the insertion angles were $60^{\circ}$ and $90^{\circ}$, proved to be excellent. However, when the angle was over $120^{\circ}$, the performance was only 75-80%. The performance was at 100% efficiency when the ratio between running speed and conveying belt speed of the prototype was 1:2, which seems to be the ideal ratio for the sesame reaper. Conclusions: A sesame reaper was developed, which can integrate the processes of cutting, conveying, and collecting, by investigating and considering various factors involved in the reaping process. The sesame reaper can reduce the costs for yielding and producing sesame due to its highly efficient performance.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.26-31
• /
• 2022

This study was carried out to evaluate the growth characteristics and forage yield potential for warm season grass as emergency forages. The experimental design was a randomized block design (RBD) with three replications. Two barnyard millet (Echinochloa species cv. Shirohie and Jeju native), a pearl millet (Pennisetum glaucum cv Feed milk 2) a proso millet (Panicum miliaceum cv Native), a teffgrass (Eragrostis tef cv. Tiffany) and a kleingrass (Panicum coloratum cv. Selection 75) were compared for forage production and quality at the Mid regions of Korea. Warm season forage crops were sown on May 21 and June 23 respectively, and in 2021, it was sown twice on May 21 and June 21 The number of days to seedling emergence for barnyard millet and teffgrass was observed approximately 10 and 3 days after seeding, respectively. The cultivation period from seeding to harvest was within 60 days for all entry spices except for the late-heading type barnyard millet (within 84 days). As for the dry matter yield by seeding date, the dry matter yield of the late-heading type barnyard millet in May seeding was the highest at 23,872 kg/ha, and the kleingrass was the lowest at 3,888 kg/ha. For the June seeding, the dry matter yield of the late-heading type barnyard millet was 17,032 kg/ha, the highest, and the proso millet, teffgrass and kleingrass showed the lowest at 5,468, 5,442, and 5,197 kg/ha, respectively. The crude protein (CP) content was varied by warm season grass species, but the early-heading type barnyard millet, teffgrass, and kleingrass showed the highest tendency, and the late-heading type barnyard millet showed the lowest at 5.7~5.9%. Neutral detergent fiber (NDF) and acid detergent fiber (ADF) content did not show a significant difference between the seeding in May, but kleingrass in June sowed lower than the others.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.2
• /
• pp.165-173
• /
• 1985

The objectives of the study were to investigate the effects of foliage clipping on photosynthesis and grain filling for branch and non branch types under the polyethylene film mulch and non mulch conditions in mono cropping and second cropping after barley in sesame (Sesamum indicum L.), and to improve poor grain filling at later flowering time utilizing these data. One thousand grain weight was more decreased in branch type than in non branch type, in polyethylene film mulch condition than in non mulch condition, and in second cropping after barley than in mono cropping by clipping lower part foliage. Twentyfive percent clipping of lower part foliage showed a little increase than no clipping. Matured grain rate also showed same tendency between branch and non branch type and between mono cropping and second cropping after barley as well as 1,000 grain weight except for polyethylene film mulch. Matured grain rate of 25% foliage clipping at 30 days after flowering in non branch type presented a little increase but decreased in branch type. Clipping of higher part leaves were so serious decrease of matured grain rate that higher part leaves at late maturing time have a major role in photosynthesis. Matured grain rate of foliage clipping at 10 days after flowering was decreased in all treatments. Chlorophyll content of higher part leaves at 50% lower part foliage clipping presented 39% increase compared to same positioned leaves of non treatment, and 66% increase by 50% higher part foliage clipping in lower part leaves. Photosynthetic activity was 58% more increased in 50% lower part foliage clipping than no clipping, but seriously decreased in 50% higher part foliage clipping. Therfore, photosynthates of remained lower part leaves could not only support their own demands, but also any contribution to translocation of photosynthates from source to sink at late maturing time. Harvest index was 28% increased in 25% lower part foliage clipping and 13% decreased in 50% higher part foliage clipping compared to no clipping. Leaf area was 48% increased in 50% lower part foliage clipping compared to the same positioned leaves of no clipping, and only 5% increased in higher part foliage clipping. Productivity by foliage clipping compared to non treatment, was highly decreased in branch type than in non branch type, in second cropping after barley than in mono cropping. Little difference was detected between polyethylene film mulch and non mulch conditions. Twenty five percentage of lower part foliage clipping on mono cropping of non branch type appeared 5% and 8% yield increase in each of polyethylene film mulch and non mulch conditions compared to no clipping, and all decreased in other treatments. Mean loss of productivity by foliage clipping at 10 days after flowering was serious than clipping at 30 days after flowering. As the result, contribution to photosynthesis of source at 10 days after flowering are larger than that at 30 days after flowering in sesame. Fifty percent lower part foliage clipping at 10 days after flowering showed so the most serious yield decrease that lower part leaves at that time were considered as the main role leaves for photosynthesis.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.3
• /
• pp.201-205
• /
• 2000

Eleven runoff $plots(3{\times}15\;m)$ were built on a sloping field of a high plateau in Kangwon Province, Korea. The plots were treated with different tillage, residue covers and fertilizers, corn and potato were cultivated, and sediment discharge was measured from the plots for 3 years. Agricultural management practices were monitored around the plots to develop adequate best management practices. The least sediment occurred from the plots with no-till and 100% residue cover $(corn,\;0.1{\sim}2.2\;t/ha/year)$ and with contour tillage and vinyl sheet cover plots $(potato,\;0.1{\sim}0.2\;t/ha/year)$. The largest sediment was measured from the plots with up-and-down till and no cover ($11{\sim}33$ and $16{\sim}31\;t/ha/year$ from corn and potato plots, respectively). The type of organic and commercial fertilizers seemed not to affect sediment discharge. Sediment discharge from contour plots were largely dependent on the collapse of ridges due to the flush of water stored in furrows. The sediment discharge from contour corn and potato plots with no residue cover was $10{\sim}27$ and $16{\sim}24\;t/ha/year$, respectively. No-till with residue cover, vinyl cover for tuber crops, construction of furrow dam, frost heave research, furrow and ridge tillage with furrow dam after tuber crop harvest, limited stalk harvest of row crops, use of winter cover crops, and other common best management practices were recommended to minimize the sediment discharge from a high plateau sloping land culture.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.4
• /
• pp.323-328
• /
• 1998

A field experiment was carried out to determine the effects of chemical and mechanical treatment at mowing on the field drying rate and hay quality of autumn oat (Avena sativa L.). The chemical drying agent/mower conditioner ($K_2CO_3$ 2%, conditioning, $K_2CO_3$ 2% + conditioning and control) were treated at different harvest stages (late boot, heading and bloom stage) for hastening hay manufacture in the autumn of 1996. After field dry, square bales were made by hay baler, and the dry matter(DM) loss and visual estimation of oat hay were evaluated after storing two months. In general, the field drying rate of oat was slow, regardless of harvest stage. Mechanical and chemical + mechanical treatment were effective, but the effectiveness of chemical alone was very low. With mower conditioning, the duration of field dry was shortened by 2 days compared with control. The DM loss of hay was higher at boot stage(51.4%) than at heading stage (21.1%), and the DM loss was reduced by mechanical and chemical + mechanical combined treatment. The visual score (leafiness, green color, odor and softness) of hay after storing was high in mechanical and chemical + mechanical, but the score by chemical alone was very low. The nutritive value (ADF, NDF, digestibility, and relative feed value) of hay was also high with treatment of mechanical and chemical + mechanical, but the quality by chemical alone was similar compared with control. In conclusion, mower conditioning can enhance the field drying rate of autumn oat, but the drying efficiency of the chemical drying agent was very low. However, it is suggested that hay-making of oat in autumn is very hard though using mower conditioner.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.62-69
• /
• 1985

In order to develop the mechanical fruit harvest system the detachment force, type and torque investigated and analyse as several loading modes were applied on the fruit-stem of the persimmon fruit. A proving ring with strain gauges was used for the experiment. The following conclusions were drawn from the results : The mode of withdrawl of the stem from the calyx appeared highly as the persimmon fruit matured. The mode of failure at the junction of the stem and calyx which was desirable mode for mechanical fruit harvest increased as the angular displacement of the fruit with respect to the stem axis increased from zero to ninety degrees. However the mode of failure of the fruiting branch decreased for the same degree of angle pull as above. The range of detachment force of the persimmon fruit was from 13 to 5 kg. The detachment force decreased from 47 to 8 % as the fruit matured. Also, the force decreased from 31 to 24 % for the same maturity levels as the angular displacement of the fruit with respect to the stem axis increased from zero to ninety degrees. The range of detachment force to weight ratio(F/W) of the fruit was from 130 to 54 approximately. The detachment force to weight ratio (F/W) decreased from 36 to 8 % as the fruit matured. Also, the ratio (F/W) decreased from 49 to 33 % for the same maturity levels as the same degree of angle pull as above. In order to remove fruit from tree the desirable force applied to the stem is approximately from 1,280 to 530 kg. Also, the desirable torque to remove the fruits was approximately from 1.1 to $0.5kg{\cdot}cm$.