• 상하수도학회지
• /
• 제29권3호
• /
• pp.293-303
• /
• 2015

Optimal design of the water supply pipe network aims to minimize construction cost while satisfying the required hydraulic constraints such as the minimum and maximum pressures, and velocity. Since considering one single design factor (i.e., cost) is very vulnerable for including future conditions and cannot satisfy operator's needs, various design factors should be considered. Hence, this study presents three kinds of design factors (i.e., minimizing construction cost, maximizing reliability, and surplus head) to perform multi-objective optimization design. Harmony Search (HS) Algorithm is used as an optimization technique. As well-known benchmark networks, Hanoi network and Gyeonggi-do P city real world network are used to verify the applicability of the proposed model. In addition, the proposed multi-objective model is also applied to a real water distribution networks and the optimization results were statistically analyzed. The results of the optimal design for the benchmark and real networks indicated much better performance compared to those of existing designs and the other approach (i.e., Genetic Algorithm) in terms of cost and reliability, cost, and surplus head. As a result, this study is expected to contribute for the efficient design of water distribution networks.

• Geomechanics and Engineering
• /
• 제27권5호
• /
• pp.511-525
• /
• 2021

In the design of underground excavation, the shear strength (SS) is a key characteristic. It describes the way the rock material resists the shear stress-induced deformations. In general, the measurement of the parameters related to rock shear strength is done through laboratory experiments, which are costly, damaging, and time-consuming. Add to this the difficulty of preparing core samples of acceptable quality, particularly in case of highly weathered and fractured rock. This study applies rock index test to the indirect measurement of the SS parameters of shale. For this aim, two efficient artificial intelligence methods, namely (1) adaptive neuro-fuzzy inference system (ANFIS) implemented by subtractive clustering method (SCM) and (2) support vector regression (SVR) optimized by Harmony Search (HS) algorithm, are proposed. Note that, it is the first work that predicts the SS parameters of shale through ANFIS-SCM and SVR-HS hybrid models. In modeling processes of ANFIS-SCM and SVR-HS, the results obtained from the rock index tests were set as inputs, while the SS parameters were set as outputs. By reviewing the obtained results, it was found that both ANFIS-SCM and SVR-HS models can provide acceptable predictions for interlocking and friction angle parameters, however, ANFIS-SCM showed a better generalization capability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.151_152
• /
• 2009

The capacity constraints of tie-lines in production cost analysis are very important issues in the operation and planning of MicroGrid power systems. This paper presents the Harmony Search(HS) algorithm to solve the Economic Dispatch (ED) problem with tie-line capacity limits in MicroGrid system. The applied HS algorithm has achieved efficient and accurate solutions for three-area MicroGrid systems with renewable power units.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.352-352
• /
• 2023

본 연구에서는 제주도권역 강우관측소의 고도별 공간분포의 적정성을 평가하기 위한 방안으로 고도별 강우관측소의 최근린지수(Nearest Neighbor Index, NNI)를 산정하고 현재 강우관측소 공간분포의 적정성을 평가하였다. 또한, 제주도권역을 고도에 따라 등면적으로 구분하고, 고도마다 상이한 지형조건을 고려하기 위해 등면적으로 구분된 각 강우관측소의 최대 NNI를 최적화 기법의 하나인 화음탐색법(Harmony Search, HS)을 이용하여 산정하였다. 이와같이 현재 강우관측소설치위치를 기준으로 산정한 NNI와 HS를 이용하여 산정한 최대 NNI의 차이를 바탕으로 지형적인 특성을 고려한 제주도권역 강우관측소 분포를 비교·검토하였다. 그 결과 고도가 높아짐에 따라 강우관측소의 개수가 낮은 고도에 비해 상대적으로 적어 관측소 밀도가 작은 것으로 산정되었다. 향후 제주도권역 강우관측소의 지형적인 특성을 반영한다면 보다 효율적인 제주도권역 강우량관측이 가능할 것으로 판단된다.

• Earthquakes and Structures
• /
• 제19권4호
• /
• pp.243-259
• /
• 2020

This study aims to optimize, design, and predict the MTMDs performance in SDOF systems using spectral analysis, and then apply their results to MDOF structures. Given the importance of spectral analysis in the design of new engineering structures, achieving a method for designing TMDs based on this theory can be of great importance for structural designers. In this study, several convenient combinations of MTMDs in an SDOF system are first considered to minimize the maximum displacement. For calculating the frequency ratios of dampers, an innovative technique is adopted in which the values of different modal responses obtained from the spectral analysis are approached together. This procedure is done using a harmony search (HS) algorithm. Also, using the random vibration theory, the damping ratio of the dampers is obtained. Then, an equation is presented for predicting the performance of MTMDs. For evaluating this equation, three structures with different stories are designed. Some of the presented combinations of dampers are added to them. The time history analyses are employed to analyze the structures under 30 different accelerograms. The findings indicated that the proposed equation could efficiently predict the performance of the MTMDs. Furthermore, four different patterns of damper distribution along the height of the structures are defined. The effect of them on the maximum deformation of the structures in time history analyses is discussed, and an equation is presented to estimate this effect. The results indicated that the average and maximum error percentages of the proposed equations are about three and seven percent, respectively, compared to the time history analyses results, which are negligible values.

• Computers and Concrete
• /
• 제15권1호
• /
• pp.55-71
• /
• 2015

This paper presents a novel harmony search (HS)-based data-driven single input rule modules (SIRMs)-connected fuzzy inference system (FIS) for the prediction of stress in externally prestressed tendon. The proposed method attempts to extract causal relationship of a system from an input-output pairs of data even without knowing the complete physical knowledge of the system. The monotonicity property is then exploited as an additional qualitative information to obtain a meaningful SIRMs-connected FIS model. This method is then validated using results from test data of the literature. Several parameters, such as initial tendon depth to beam ratio; deviators spacing to the initial tendon depth ratio; and distance of a concentrated load from the nearest support to the effective beam span are considered. A computer simulation for estimating the stress increase in externally prestressed tendon, ${\Delta}f_{ps}$, is then reported. The contributions of this paper is two folds; (i) it contributes towards a new monotonicity-preserving data-driven FIS model in fuzzy modeling and (ii) it provides a novel solution for estimating the ${\Delta}f_{ps}$ even without a complete physical knowledge of unbonded tendons.

• Smart Structures and Systems
• /
• 제12권2호
• /
• pp.137-155
• /
• 2013

Brittle fracture of structures excited by earthquakes can be prevented by adding a tuned mass damper (TMD). This TMD must be optimum and suitable to the physical conditions of the structure. Compressive strength of concrete is an important factor for brittle fracture. The application of a TMD to structures with low compressive strength of concrete may not be possible if the weight of the TMD is too much. A heavy TMD is dangerous for these structures because of insufficient axial force capacity of structure. For the preventing brittle fracture, the damping ratio of the TMD must be sufficient to reduce maximum shear forces below the values proposed in design regulations. Using the formulas for frequency and damping ratio related to a preselected mass, this objective can be only achieved by increasing the mass of the TMD. By using a metaheuristic method, the optimum parameters can be searched in a specific limit. In this study, Harmony Search (HS) is employed to find optimum TMD parameters for preventing brittle fracture by reducing shear force in additional to other time and frequency responses. The proposed method is feasible for the retrofit of weak structures with insufficient compressive strength of concrete.

• 한국수자원학회논문집
• /
• 제38권3호
• /
• pp.199-212
• /
• 2005

노후관망의 최적개량 계획수립 시에는 수리학적 타당성을 포함한 다양한 인자들이 복합적으로 고려되어야 하며 모형에 고려할 인자들이 증가할수록 보다 효율적인 최적화 기법의 적용이 필요할 것이다. 그러나, 국내에서는 유전자알고리즘과 같은 보다 효과적인 알고리즘을 이용한 노후관 개량을 위한 의사결정시스템에 대한 연구가 미비한 실정이다. 본 연구의 목적은 최근 국내에서 제안된 ReHS라는 최적화기법을 이용해 기존의 모형에서 고려하지 않은 다양한 인자들을 고려한 상수관망 최적개량 의사결정 시스템을 개발하는데 있다. 본 연구에서는 고려하는 조건에 따라 다른 목적함수를 갖는 5개의 모형을 개발하여 가상관망에 적용하였으며, 기존에 개발된 모형들보다 타당한 결과를 나타내었다.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.426-434
• /
• 2006

The impact of leakage was incorporated into the transfer functions of the complex head and discharge. The impedance transfer functions for the various leaking pipeline systems were also derived. Hydraulic transients could be efficiently analyzed by the developed method. The simulation of normalized pressure variation using the method of characteristics and the impulse response method shows good agreement to the condition of turbulent flow. The leak calibration could be performed by incorporation of the impulse response method with Genetic Algorithm (GA) and Harmony Search (HS). The objective functions for the leakage detection can be made using the pressure-head response at the valve, or the pressure-head or the flow response at a certain point of the pipeline located upstream from the valve. The proposed method is not constrained by the Courant number to control the numerical dissipation of the method of characteristics. The limitations associated with the discreteness of the pipeline system in the inverse transient analysis can be neglected in the proposed method.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.2084-2088
• /
• 2007

상수관망의 수리해석기법은 demand-driven analysis(DDA)와 pressure-driven analysis(PDA)로 구분할 수 있다. 관거 파괴나 용수수요 급증과 같이 용수공급시스템이 비정상상태인 경우 절점의 용수수요는 항상 만족한다는 가정을 사용하는 DDA의 경우 비현실적인 결과를 줄 수 있으며, 절점수요와 절점수두를 동시에 고려하는 PDA의 개념을 이용한 관망의 수리해석이 필요하다. PDA의 개념을 사용하여 개발된 기존의 많은 모형들은 복잡한 실제관망에는 적용이 불가능한 문제점들을 가지고 있으며, 본 연구에서는 화음탐색법(Harmony Search, HS) EPANET의 toolkit을 연계하여 개발된 HSPDA모형의 실제 대규모 상수관망에의 적용성을 검토하였다. 실제 대규모관망에의 적용성 향상을 위해 화음탐색법의 새로운 인자인 PIR를 제안하였으며 적용결과 새롭게 제안된 PIR은 HSPDA모형의 최적해탐색효율을 획기적으로 향상시켰으며, HSPDA모형을 이용한 실제 대규모관망의 비정상상태 수리모의가 가능한 것으로 판단된다.