• 한국전자파학회논문지
• /
• 제23권6호
• /
• pp.682-690
• /
• 2012

본 논문은 2차 고조파 주입을 적용한 고선형의 균형적인 자체 발진 혼합기(SOM)를 제안하였다. 제안한 SOM은 발진을 위하여 균형적 공진기 구조인 H-슬롯 결함 접지면 구조로 설계하였다. H-슬롯 결함 접지면 구조는 높은 Q 계수를 가지므로 발진기의 낮은 위상 잡음을 제공하기에 적합한 구조이다. 혼합기는 균형적 국부발진기(LO) 신호가 RF 입력 포트에 영향을 주면 안 되므로 LO-RF 신호의 격리에 좋은 단일 평형 혼합기를 활용하였다. 또한, 제안한 SOM은 선형성 향상을 위해 IF의 2차 고조파 주입을 위하여 서로 다른 피드백 경로를 사용하는 두 가지 방법을 제안하였다. 첫 번째 방법은 입력 파워 -20 dBm의 5 GHz RF 입력 신호일 때 226 MHz IF에서 3.08 dB의 변환 이득을 실현하였고, 두 번째 방법으로는 입력 파워 -20 dBm의 5.2 GHz RF 입력 신호일 때 423 MHz IF에서 2 dB의 변환 이득을 달성하였다. 두 가지 방법 대한 측정 결과, 3차 혼변조 왜곡(IMD3)는 각각 61.8 dB, 65 dB로 나타났다. 따라서 제안한 SOM은 2차 고조파 주입 기술을 적용하지 않은 것에 비해 두 가지 방법 각각 IMD3가 18.8 dB, 21 dB로 개선되었으므로 향상된 선형성을 보여준다.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.604-614
• /
• 2018

This paper proposes a synchronous switching technique for a Vienna rectifier that uses carrier-based pulse width modulation (CB-PWM). A three-phase Vienna rectifier, similar to a three-level T-type converter with three back-to-back switches, is used as a PWM rectifier. Conventional CB-PWM requires six independent gate signals to operate back-to-back switches. When internal switches are operated synchronously, only three independent gate signals are required, which simplifies the construction of gate driver circuits. However, with this method, total harmonic distortion of the input current is higher than that with conventional CB-PWM switching. A reactive current injection technique is proposed to improve current distortion. The performance of the proposed synchronous switching method and the effectiveness of the reactive current injection technique are verified using simulations and experiments performed with a set of Vienna rectifiers rated at 5 kW.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.719-728
• /
• 2013

A novel hybrid active power filter (NHAPF) that can be adopted in high-voltage systems is proposed in this paper. The topological structure and filtering principle of the compensating system is provided and analyzed, respectively. Different controlling strategies are also presented to select the suitable strategy for the compensation system. Based on the selected strategy, the harmonic suppression function is used to analyze the influence of system parameters on the compensating system with MATLAB. Moreover, parameters in the injection branch are designed and analyzed. The performance of the proposed NHAPF in harmonic suppression and reactive power compensation is simulated with PSim. Thereafter, the overall control method is proposed. Simulation analysis and real experiments show that the proposed NHAPF exhibits good harmonic suppression and reactive power compensation. The proposed compensated system is based on the three-phase four-switch inverter, which is inexpensive, and the control method is verified for validity and effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1236-1238
• /
• 2000

This paper considers the problem of eliminating harmonics in the inverter output waveforms. The approach is based on the minimization of the current harmonics in the induction motor by space vector modulation method. Reference voltage is compensated with injection of controlled current harmonics which are calculated to reduce current harmonics through sampled current harmonic analyzing algorithm. The theoretical analysis is carried out using computer simulation. It is verified that proposed SVM technique could reduce current harmonic component and improve THD.

• 전기전자학회논문지
• /
• 제26권1호
• /
• pp.95-103
• /
• 2022

본 논문에서는 저가격 인버터에서의 사각파 주입에 의한 센서리스 기법의 제어 성능을 보인다. 저가격 인버터는 소위 말하는 B4 인버터이다. 이 인버터는 저가격화를 위하여 스위칭 소자를 4개를 사용한 형태이다. 고주파 주입을 통한 센서리스 기법을 B4 인버터에 적용하였으며, 주입 고주파의 주파수는 1kH이다. 본 논문에서는 Matlab/ Simulink를 이용한 B4 인버터를 이용한 영구자석 전동기의 센서리스 시스템 모델을 설명한다. 한편, 본 연구에서는 회전자의 위치 추정을 위한 고주파 전류 성분 검출에 노치 필터를 사용하였으며, 추정된 속도의 리플 저감을 위하여 이차 저역 통과 필터를 사용하였다. 노치 필터에 의해 추출된 전류 파형에 고주파 전압을 곱하여 영구 자석 동기 전동기의 회전자 각도를 추정한다. Simulink 시뮬레이션의 통해 제안하는 기법의 타당성을 보인다.

• 전력전자학회논문지
• /
• 제23권1호
• /
• pp.59-65
• /
• 2018

A new single-stage flyback power converter with PFC for electrolytic capacitor-less LED driver is proposed in this study. This method minimizes the peak-to-average ratio of the LED driving pulsating current by adding the LED driving current near the LED current valley area, as well as the third harmonic component injection into the input current. The reduced peak current value of the LED drive current minimizes the thermal stress of the LED itself, thereby increasing the reliability of the LED, as well as achieving a long lifetime. Simulation and experimental results show the usefulness of the proposed topology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.451-455
• /
• 1991

The PWM control technique is proposed which can eliminate the harmonic components of the nonsinusoidal ac line current such as the current of 6-phase rectifier by injecting PWM current. TSC(Time-Sharing Control) is adopted to avoid the unbalance between three PWM injection currents at the three-phase system. Also a new power circuit for three-phase filter is suggested for realizing the proposed PWM control technique. The operation characteristics are investigated theoretically and experimentally to show the feasibility of the optimized injection method.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.269-272
• /
• 2003

A low phase noise frequency synthesizer at X-Band which employs the subharmonic injection locking was designed and tested. The frequency synthesizer consists of two oscillators - master and slave : A 1.75GHz master oscillator made of PLL synthesizer produces 6th harmonic at 10.5GHz, which excites the following 10.5GHz slave oscillator. The realized frequency synthesizer has a 4.5dBm of output power, and a phase noise of -108dBc/Hz at the 100kHz offset frequency.

• 대한후두음성언어의학회지
• /
• 제24권2호
• /
• pp.112-117
• /
• 2013

Background and Objectives : This study aimed to determine the clinical effect of $Artecoll^{(R)}$ injection laryngoplasty for patients with vocal atrophy and mild sulcus vocalis. Materials and Method : Forty-one patients with vocal atrophy and/or mild sulcus vocalis received transcutaneous $Artecoll^{(R)}$ injection into the vocal folds under local anesthesia. Subjective evaluations including voice handicap index (VHI) and perceptual grading with Grade, Roughness, Breathiness, Asthenia, Strain (GRBAS) scales and objective evaluations including jitter, shimmer, noise-to-harmonic ratio (NHR), speaking fundamental frequency (SFF) and maximum phonation time (MPT) were evaluated before and 3 months after the injection. Results : VHI and Grade, Breathiness and Strain scales in GRBAS showed significant improvement 3 months after injection. SFF and MPT also significantly improved after the injection ; MPT increased and SFF in male patients decreased. Conclusion : Injection laryngoplasty with $Artecoll^{(R)}$ is an effective method for correcting the glottal insufficiency and improving voice quality in patients with vocal atrophy and/or mild sulcus.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.1076-1081
• /
• 2003

본 논문에서는 반도체레이저를 이용한 밀리미터파 대역의 신호를 생성하는 방법에 대해 제안하였다. 광대역에서의 밀리미터파 신호를 얻기 위해서는 윈하는 공진 주파수대역의 신호를 얻기 위해는 서브 하모닉의 좁은 신호 성분의 하모닉 신호인 다중의 신호를 서로 beating하여 원하는 주파수 대역의 신호를 얻을 수 있다. 따라서 본 논문에서는 반도체레이저를 사용한 광주입 방법을 통하여 실제적으로 원하는 주파수 대역의 신호를 얻기 위해 실험적으로 고찰하였으며, 신호 성분의 성능을 구하기 위해 phase noise 성분을 측정하였다.