• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.732-739
• /
• 2005

The determination of sound pressure radiated from periodic plate structures is fundamental in the estimation of noise level in aircraft fuselages or ship hull structures. As a robust approach to this problem, here a very general and comprehensive analytical model is developed for predicting the sound radiated by a vibrating plate stiffened by periodically spaced orthogonal symmetrical beams subjected to a sinusoidally time varying point load. In this these, we experiment with the numerical analysis using the space harmonic series and the SYSNOISE for measuring the vibration mode and character of response caused by sound radiation with adding the harmonic point force in the thin isotropic plate supported by the rectangular lattice reinforcement. We used the reinforcements, beams of open type section like the style of 'ㄷ' letter; the space of the beams were chosen to be 0.2m, 0.3m, 0.4m. We studied the behavior of sound pressure levels, analysis of vibration mode between support points, connection between frequency function and sound pressure levels, and connection between position function and sound pressure levels.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.181-185
• /
• 2011

Due to the increasing of nonlinear loads such as converters and inverters connected to the electric power distribution system, and extensive application of harmonic generation sources with power electronic devices, disturbance of the electric power system and its influences on industries have been continuously increasing. Thus, it is difficult to construct accurate load model for active and reactive power in environments with harmonics. In this research, we develop current harmonics estimation method based on Extreme Learning Machine (ELM) with fast learning procedure for residential loads. Using data sets acquired from various residential loads, the proposed method has been intensively tested. As the experimental results, we confirm that the proposed method makes it possible to effective estimate current harmonics for various input voltage.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2370-2378
• /
• 2009

The enhanced phase angle estimation algorithm is essential to supply the power stably under synchronizing with grid source. In this paper, we are proposed the novel phase angle estimation algorithm and verified the validity of proposed method as simulation with PSIM and experiments. We sort the harmonics element using high-pass filter(HPF) that have the cut-off frequency below basic element and make reverse d-q transformation. So, it can be restored the harmonics element at stationary axis, and we can get the fundamental voltage element of AC grid. Proposed PLL method have a rapid responsibility and a large margin at controller design than conventional method because it have a small phase delay and a sufficient controller gain margin. And, it can reduce the error of voltage rms value and axis transformation according to robust PLL algorithm against the harmonic and phase unbalance.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.101-108
• /
• 1988

In this paper the power spectrum of background EEG is estimated by the LMS PHD based on least mean square. At the power spectrum estimatiom, the stocastic process of background EEG is assumed to consist of the nonharmonic sinusoid and the white noise. In the LMS PHD the model parameters are obtained by the least mean square at optimal order which is obtained from the fact that the eigenvalue's fluctuation of autocorrelation matrix of the normal back-ground EEG is smaller at some order than at other order when the power spectrum of background EEG is esitmated by PHD. The optimal order of this model is the 6-th order when the eigenvalue's fluctuation of autocorrelation matrix of background EEG is considered. The estimation results are with compared the results from the Maximum Entropy Spectral Estimation and Pisarenko Harmonic Decomposition. From the comparison results. The LMS PHD is possible to estimate the power spectrum of background EEG.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1269-1274
• /
• 2012

In this paper, the iron loss was calculated using estimated iron loss coefficient at 650W Interior Permanent Magnet Synchronous Motor(IPMSM) and 250W IPMSM. The iron loss coefficients was estimated different according to electrical steel material used to stator and rotor core in motor. Aspect of The rotating flux field and alternating flux field was confirmed by magnetic field behavior and harmonic analysis in stator core, the iron loss was calculated using flux density by Finite Element Method(FEM) and estimated coefficients by iron loss coefficient estimation proposed in this paper. The iron loss experiment was performed for verified to iron loss calculation, and the iron loss coefficients were verified by comparison of iron loss calculation value and experimental value.

• 전력전자학회논문지
• /
• 제26권4호
• /
• pp.294-297
• /
• 2021

A grid voltage estimation method for modular plug-in active power decoupling (APD) circuits is proposed in this study as direct replacements of electrolytic capacitors. Since modular plug-in APD circuits cannot have additional grid voltage sensors and should be operated independently without information exchange with the front-end converter, it is impossible to obtain the phase information of the grid directly. Therefore, the proposed method uses the second-order harmonic component of the DC-link voltage to estimate the grid voltage necessary to control the APD circuit. By employing the proposed method, the concept of modular plug-in APD circuits can be realized and implemented without direct detection of the grid voltage. The experimental results based on hardware-in-the-loop simulation (HILS) validate the effectiveness of the proposed control method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.263-268
• /
• 2000

본 논문에서는 고조파 소음을 내는 시스템의기본 주파수 추정을 통한 새로운 피드백 능동소음제어 방법을 제안한다. 기존신호를 측정하기 어려운 상황에서 종래의 다중 정현파 소음의 능동제어 방법은 기준신호를 측정하는 대신 추정된 주파수를 이용하여 기준신호를 만들어낸다. 그러나 비팅현상(beating phenomenon)이 존재할 때는 순간적으로 특정 주파수 성분이 사라지게 되므로 적응 주파수 추정이 어렵게 되어 비팅현상에 의한 주파수 추정에서의 혼돈을 만들어진 기준신호를 쓸모없게 만든다. 제안된 알고리즘은 두 가지 부분으로 구성된다. 첫째는 기본주파수 추정을 이용한 기준신호 발생기이고 둘째는 기존의 피드포워드 제어부분이다. 제안된 결정 규칙을 이용한 기본주파수 추정알고리즘은 비팅현상에 둔감할 뿐 아니라 기존의 직렬형 적응노치필터 방법에 비해 좋은 추종성능과 적은 주파수 추정 오차의 분산을 갖는다. 더욱이 신호대잡음비가 좋지 않아 기존의 주파수 검증하기 위해서 실측한 선박의 객실 소음과 자동차의 시변하는 엔진부밍소음에 대해서 모의 실험을 수해한다.

• 소음진동
• /
• 제10권6호
• /
• pp.1059-1066
• /
• 2000

본 논문에서는 고조파 소음을 내는 시스템의 기본 주파수 추정을 통한 새로운 피드백 능동소음제어 방법을 제안한다. 기준신호를 측정하기 어려운 상황에서 종래의 다중 정현파 소음의 능동제어 방법은 기준신호를 측정하는 대신 추정된 주파수를 이용하여 기준신호를 만들어낸다.$^{(4)}$ 그러나 맥놀이현상(beating phenomenon)이 존재할 때는 순간적으로 특정 주파수 성분이 사라지게 되므로 적응 주파수 추정이 어렵게 되어 맥놀이현상에 의한 주파수 추정에서의 혼돈은 만들어진 기준신호를 쓸모없게 만든다. 제안된 알고리즘은 두 가지 부분으로 구성된다. 첫째는 기본주파수 추정을 이용한 기준신호 발생기이고 둘째는 기존의 피드포워드 제어 부분이다. 제안된 결정 규칙을 이용한 기본주파수 추정알고리즘은 맥놀이현상에 둔감할 뿐 아니라 기존의 직렬형 적응노치필터 방법에 비해 좋은 추종성능과 적은 주파수 추정 오차의 분산을 갖는다.$^{(4)}$ 더욱이 신호대잡음비가 좋지 않아 기존의 주파수 추정방법으로는 추정될 수 없는 주파수 성분가지 제어가 가능하다. 제안된 능동소음제어 방법의 성능을 검증하기 위해서 실측한 선박의 객실 소음과 자동차의 시변하는 엔진부밍소음에 대해서 모의 실험을 수행한다.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1345-1351
• /
• 2013

Variable iron loss as function of current phase angle of Interior Permanent Magnet Synchronous Motor(IPMSM) was calculated through Curve Fitting Method(CFM). Also, a magnetic flux density distribution of iron core according to current phase angle was analyzed, and an iron loss calculation was performed including harmonic distortion. The experiment was performed by production of non-magnetizing model for the separation of mechanical loss, and the iron loss was calculated by the measurement of input using power analyzer and output power using dynamometer. Some error was generated between experimental results and calculation value, but an iron loss diminution according to current phase angle followed a same pattern. So, errors were generated by measurement, vibration, noise, harmonic distortion loss, etc.

• 대한수학회지
• /
• 제37권1호
• /
• pp.31-44
• /
• 2000

We study a free boundary problem satisfying Bernoulli type boundary condition along which the gradient of a piecewise harmonic solution jumps zero to a given constant value. In such problem, the free boundary splits the domain into two regions, the zero set and the harmonic region. Our main interest is to identify the global shape and the location of the zero set. In this paper, we find the lower and the upper bound of the zero set. In a convex domain, easier estimation of the upper bound and faster disk test technique are given to find a rough shape of the zero set. Also a simple proof on the convexity of zero set is given for a connected zero set in a convex domain.