• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1402-1404
• /
• 2000

The electrified railway has various power supply schemes. Although the identical trains are operated in same condition and the impedance of track are equal, the genealogy impedance of track is changed according to composition method of feeding scheme. So, the harmonic current flowing into the railway substation are greatly unlike. For simulation of harmonic magnification flowing into the railway substation according to feeding scheme, we propose 6-port network analysis method based on 4-port network, find 6-port equivalent model of each circuit component, and compare and investigate harmonic magnification in the case of parallel post and normal feeding scheme.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권4호
• /
• pp.172-176
• /
• 2005

Power system restoration following a massive or complete blackout starts with energizing of primary restorative transmission lines. During this primary restoration, inexpected overvoltage may happen due to nonlinear interaction between the unloaded transformer and the transmission system. This is known as the harmonic resonance phenomenon that may cause burning out of transformer or other devices. By now the harmonic resonance is reported in the extra high voltage system. This paper reports the detection of the resonance in Korean power system. Basic analysis and simulation of the harmonic overvoltage is presented using EMTDC.

• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.1-7
• /
• 2014

This paper proposes a current harmonic compensation method for the grid-connected inverter, especially caused by the grid impedance. Grid impedance causes low order harmonics in the grid current and deteriorates power quality. This paper analyzes the negative impact of the grid impedance, and proposes an active feedforward compensation method. Proposing method verified through simulation and experiment with 3-phase 1.5kW voltage source inverter prototype.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.217-219
• /
• 2004

The second harmonic component could be decreased by magnetizing inrush when there have been changes to the material of the iron core or its design methodology. The higher the capacitance of the high voltage status and underground distribution, the more the differential current includes the second harmonic during the occurrence of an internal fault. Therefore, the conventional second harmonic-restrained RDR needs modification. This paper describes an advanced numerical algorithm that utilizes terminal voltage, differential current harmonics, harmonic ratio, and flux-differential current slope. Based on the results of testing with WatATP99 simulation data, the proposed algorithm was proven to be faster and more reliable.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2005년도 추계 학술대회 발표논문집
• /
• pp.121-124
• /
• 2005

In this paper, we propose a sound localization algorithm for two simultaneous speakers. Because speech is wide-band signal, there are many frequency sub-bands in that two speech sounds are mixed. However, in some sub-bands, one speech sound is more dominant than other sounds. In such sub-bands, dominant speech sounds are little interfered by other speech or noise. In speech sounds, overtones of fundamental frequency have large amplitude, and that are called 'Harmonic structure of speech'. Sub-bands inharmonic structure are more likely dominant. Therefore, the proposed localization algorithm is based on harmonic structure of each speakers. At first, sub-bands that belong to harmonic structure of each speech signal are selected. And then, two speakers are localized using selected sub-bands. The result of simulation shows that localization using selected sub-bands are more efficient and precise than localization methods using all sub-bands.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1553-1562
• /
• 2017

For the purpose of enhancing the performance of the shunt active power filter (APF), this paper presents a novel Fast Weighted Compound Control (FWCC) strategy based on the synchronous frame. In this control strategy, the proposed new repetitive controller can work faster and more stably by reducing the internal model cycle and introducing a damping coefficient. In addition, the harmonic detector can be removed to simplify the structure of the APF owing to the improvements. Furthermore, a proportional-integral (PI) controller is added to work in parallel with the repetitive controller by using a weighted ratio. Then, a convergence speed analysis and design algorithm are given in detail. Simulation and experimental results show that the harmonic distortion is reduced from 2.91% to 1.89%. In addition, the content for each of the characteristic harmonic orders has decreased by more than three times.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.286-288
• /
• 2004

The design of a measurement system to perform Harmonic State Estimation (HSE) is a very complex problem. In particular, the number of harmonic instruments available is always limited. Therefore, a systematic procedure is needed to design the optimal placement of measurement points. This paper presents a new HSE algorithm which is based on an optimal placement of measurement points using Genetic Algorithms (GAs). This HSE has been applied to the Simulation Test Power System for the validation of the new HSE algorithm. The study results have indicated an economical and effective method for optimal placement of measurement points using Genetic Algorithms (GAs) in the Harmonic State Estimation (HSE).

• KEPCO Journal on Electric Power and Energy
• /
• 제7권2호
• /
• pp.255-261
• /
• 2021

This paper proposes impedance-based stability analysis of DC-DC boost converters, where a harmonic state space (HSS) modeling technique is used. At first, the HSS model of the boost converter is developed. Then, the closed-loop output impedance of the converter is derived in frequency domain using small signal modeling including frequency couplings, where harmonic transfer function (HTF) matrices of the open-loop output impedance, the duty-to-output, and the voltage controller are involved. The frequency response of the output impedance reveals a resonance frequency at low frequency region and frequency couplings at sidebands of switching frequency which agree with the simulation and experimental result.

• 한국전자파학회논문지
• /
• 제12권4호
• /
• pp.551-561
• /
• 2001

본 연구에서는 GEC-Marconi 사의 H40 GaAs pHEMT 소자에 대해서 새롭게 수정한 Curtice 모델을 사용하여 대신호 통합모델을 구축하였다. 통합모델에는 DC 특성과 biss에 따른 소신호 및 잡음 특성이 모두 포함되어 있으며, 특히 수정되 Curtice 모델을 사용함으로써 gate-source 간의 전압이 증가함에 따라 나타나는 pHEMT 의 transconductance(이하 $g_{m}$) 특성을 매우 간단하면서도 물리적으로 설명할 수 있게 하였다. 또한 통합모델 내부에는 RF-choke를 사용함으로써 $g_{m}$, $R_{ds}$ 성분의 DC 상태와 AC 상태에서의 차이를 설명하게 하였다. 통합모델을 HP사의 simulation tool 인 MDS(Microwave Design System)의 SDD(Symbolically Defined Device)를 이용하여 구현한 후, 실제의 data와 비교한 결과 DC, small signal, 그리고 noise 에 대한 특성에 H40 pHEMT 와 대부분 일치함을 보았으며, 선형과 다양한 harmonic balance simulation 의 수렴성 및 정확성을 확인함으로써 본 모델을 이용한 경우 저잡음 증폭기, 발진기, 그리고 혼합기 등의 여러 부품설계를 할 수 있음을 보였다.

• 한국인터넷방송통신학회논문지
• /
• 제10권4호
• /
• pp.105-113
• /
• 2010

240 GHz 대역의 캐리어 주파수를 이용하여 1.485 Gbps 비디오 전송 시스템을 설계 및 시뮬레이션 하였다. 송수신기는 Schottky Barrier 다이오드 기반의 Sub-harmonic 믹서를 이용하였으며 특히, 수신기는 Heterodyne 및 Direct Detection 두 가지 방식을 적용하여 각각의 성능을 시뮬레이션 하였다. 변조방식은 ASK이며, 수신기에서는 Envelop 검출 방식을 사용하였다. 송신기 시뮬레이션 결과 Sub-harmonic 믹서의 LO 전력 7 dBm(5 mW)에서 IF 입력 전력 -3 dBm(0.5 mW)일 때 RF 출력 전력은 -11.4 dBm($73{\mu}W$)이었으며, SSB(Single Side Band) Conversion Loss는 8.4 dB이다. VDI사의 상용모델 WR3.4SHM(220~325 GHz)의 240 GHz에서의 Conversion loss 8.0 dB(SSB)와 근접한 결과를 얻었다. 1.485 Gbps NRZ 신호전송 시뮬레이션 결과 전송신호와 동일한 수신 파형을 얻었다.