• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2010년도 춘계학술발표회 논문집
• /
• pp.195-206
• /
• 2010

Xylan can be applied to improve the strength properties of paper; however the optical properties, such as brightness, are decreased significantly. To solve that problem, an applicable bleaching process is therefore desired. The aim of this research was to investigate the impact of hydrogen peroxide bleaching on hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (whiteness, brightness, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. Hydrogen peroxide bleaching, as a kind of totally chlorine free (TCF) bleaching method, is quite important industrially for chemical pulp. In our work, the process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied. The results showed that both good mechanical properties and optical properties could be achieved when the operating parameters were controlled properly and therefore hydrogen peroxide bleaching was proved to be a suitable method for bleaching hardwood kraft pulp with adsorption of birchwood xylan.

• The Korean Journal of Ecology
• /
• 제4권1_2호
• /
• pp.38-51
• /
• 1981

The present investigation was estimated the effect of temperature, precipitatiion, and time on the decomposition of litters with litter bags of Pinus densiffora and Quercus mongolica at Gure where elevation in 50m, and at Nogodan where elevation in 1300m on Mt. Jiri. As the above results, decomposition model was proposed to relation of the environmental conditions. And was investigated the production and decomposition of litters from the stands of various forest communities in Kwangneung, Mt. Jiri and Mt. Halla. The results are as follows; The models for the decay of organic carbon (C) was as follows: $C=Coe^{-Kt}$ (limiting factor;time) $C=Coe^{-K'te}$ (limiting factor;tempedrature) $C=Coe^{-KnP}$ (limiting factor:precipitation) As observed in litter bag method, the decomposition rate of litter in Pinus densiflora was slower than that of Quercus mongolica. The higher elevation, the slower decomposition rate. The decomposition of litters at Gure where elevation in 50m was equally influenced by temperature and precipitation. But at Nogodan where elevation in 1300m was much inflenced by precipitation. The decay constant of litters was larger in hardwood forest than in coniferous forest. In the same species, the more elevatiion, the less decomposition constant. The time required for the decay of 50%, 95^, 99% of the accumulated litters in the forest floor were faster in hardwood forest than in coniferous forest. In the same species, the higher elevatiion, the longer time required.

• 한국산림과학회지
• /
• 제96권2호
• /
• pp.222-226
• /
• 2007

This study developed the Korean roundwood import prediction model using vector autoregressive (VAR) method. The roundwood was divided into softwood and hardwood by species. The VAR model of roundwood import was specified with two lagged endogenous variables, that is, roundwood import volume and roundwood import price. The results showed that the significance levels of F-statistics in the softwood and hardwood roundwood import equations rejected the hypothesis that all coefficients are zero. So, we concluded that roundwood import volume can be explained by lagged import volume and lagged import price in Korea. The coefficient signs of all variables were as expected. Also, the model has good explanatory power, and there is no autocorrelation.

• Journal of the Korean Wood Science and Technology
• /
• 제27권4호
• /
• pp.65-71
• /
• 1999

This study was carried out to investigate the effect of xylanase pretreatment of the unbleached hardwood kraft pulp during the conventional Chlorine-Extraction- Hypochlorite (CEH) bleaching on pulp property. Optimum bleaching condition was evaluated by using Novozym produced from the fungus Humicola insolens. Also the effect of chelating agent prior to enzyme treatment was analyzed. The kappa number of enzymatic bleached pulp at the enzyme charge 10 IU/ml was slightly similar to that of bleached pulp without enzyme. By enzyme treatment, the chlorine charge in conventional CEH bleaching process of hardwood KP could be reduced by 17%, while no adverse effect on pulp yield and strength was. The optimum condition for enzyme pretreatment was 10 IU/ml xylanase charge, 3 to 4 hrs treatment, and 2% pulp consistency. In sugar composition in the enzyme pretreated pulp, arabinose and mannose were not much different, but more xylose was retained. This high content of hemicellulose in pulp seems to play an important role in pulp properties. The pulp pretreatment by chelating agent prior to enzyme treatment could improve the enzyme activity and enhance the bleaching effect at 0.2% diethylenetriamine pentaacetic acid (DTPA) charges.

• 한국농공학회논문집
• /
• 제64권2호
• /
• pp.57-69
• /
• 2022

This study analyzes the fuel conditions and environmental effects of converting heating in rural villages that rely on fossil fuels into wood fuel. In particular, we tried to derive the most important considerations when using wooden chips as fuel in aging agricultural villages where various variables such as weather, facility characteristics, fuel quality, and maintenance capabilities work. Above all, an experiment was conducted by comparing it with oak trees to determine whether Italian poplar, a representative attribute water created to supply fuel wood in Korea, is suitable for heating fuel. Through experiments, 1) Even though the supply of poplar wood chips during 10 hours of operation was 60.74 kg less than that of hardwood chips, the production of hot water was 140 kWh higher. 2) The higher the exhaust gas temperature, the proportional (increase) oxygen concentration and inversely (decrease) PM and CO emissions. 3) Poplar has twice as much ash content as hardwood and three times more fine dust has been detected, but it meets all the standards for wood quality at the Korea Forest Science Institute. 4) Under the condition that there is a difference in water content (7.7%), hardwood cost 1.13 times more wood chips per 1 MWh than poplar, and even if the water content is corrected equally, hardwood cost 1.05 times more per 1 MWh than poplar. 5) In conclusion, it was proved that the fuel possibility, economic possibility, and environmental possibility of poplar wood chips are sufficient.

• The Korean Journal of Ecology
• /
• 제23권2호
• /
• pp.83-88
• /
• 2000

When interpreting change over time in forest ecosystems, distinguishing the effects of forest succession from the effects of environmental stress can be difficult. The result may be a simplistic interpretation. citing a specific successional or environmental cause of forest change when both types may be occurring. We present two case studies of changes in the forest floor in northern hardwoods. First, the belief that 50% of soil organic matter is lost in the first 20 years after logging was based on a study comparing northern hardwood stands of different ages. We resampled a series of 13 such stands after an interval of 15 years, and found that the young stands were not, in fact. losing organic matter as rapidly as predicted from the original chronosequence study. The pattern of higher organic matter content in the forest floors of older stands compared to young stands could be equally well explained by changes in logging practices over the last century as by the aging of the stand. The observed pattern of forest floor organic matter as a function of stand age was previously interpreted as a successional pattern, ignoring changes in treatment history. In the second case study, observed losses of base cations from the forest floor were attributed to cation depletion caused by acid rain and declining calcium deposition. We found that young stands were gaining base cations in the forest floor; losses of base cations were restricted to older stands. Differences in litter chemistry in stands of different ages may explain some of the pattern in cation gains and losses. In this case, the contribution of successional processes to cation loss had been overlooked in favor of environmental stress as the dominant mechanism behind the observed changes. Studies of environmental stress use repeated measures over time. but often don't consider stand age as a factor. Studies of successional change often assume that environmental factors remain constant. We were able to consider both forest succession and external factors because we repeatedly sampled stands of different ages.

• Animal cells and systems
• /
• 제3권2호
• /
• pp.143-147
• /
• 1999

Annual production and redistribution of leaf litter were compared among three distinct understory patches in a temperate hardwood forest dominated by Quercus mongolica, Kalopanax pictus, Acer pseudo-sieboldianum, and Carpinus cordata. Two patches were located on a southwest-facing slope: one with an understory dominated by herbaceous plants (Patch S), and the other covered with evergreen dwarf bamboo, Sasa borealis (patch SS). The third patch was on the opposite slope with an understory dominated by herbaceous plants (Patch N). Annual leaf litterfall was averaged 330 g m$^{-2} yr$^{-2}$ in the three patches from 1994 to 1998. From mid-September 1996 to mid-September 1997, net transport of leaf litter over patch bound-aries was 1,824g m$^{-1}$ from Patch S to SS, 1,465g m$^{-1}$ from Patch S to N, and 886 g m$^{-1}$ from Patch SS to N. The amounts moving downslope out of Patch S, SS, and N were 2,548, 471, and 588g m$^{-1}$, respectively. When a mass balance approach was employed for the data of leaf litter transport, the results were relatively consistent with 216, 631, and 724g m$^{-2}$ of leaf litter stores in Patch S, SS, and N, respectively, in April 1997. This study suggests that leaf litter redistribution is largely regulated by aspect and understory type and exerts a significant effect on carbon processes in the forest ecosystem.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.59-65
• /
• 2011

The saw dust of tropical hardwood, Nyatoh(Palaquium Spp.), was used as a raw material for the preparation of the high valued microcrystalline cellulose(MCC). Three pulping methods, soda pulping, Kraft pulping, and acid-sulfite pulping were applied to obtain cellulose from the saw dust. The residual impurities were removed with the additional bleaching processes: (A) $ClO_2{\rightarrow}H_2O_2$; (B) $ClO_2{\rightarrow}O_3$; (C) $O_3$. For the acid treatment for MCC preparation, the $H_2SO_4$, with three concentration, 20%, 40%, 60% were applied and the effects of $H_2SO_4$ concentration on the properties of MCC were evaluated. The results indicated that the MCC obtained by acid-sulfite pulping followed with $O_3$ treatment and 40% $H_2SO_4$ treatment showed less residual lignin, higher brightness and crystallinity than that of Avicel MCC.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.47-54
• /
• 2015

In this study, effects of kneading treatment on the properties of hardwood bleached kraft pulp (HwBKP), softwood bleached kraft pulp (SwBKP) and hardwood bleached chemi-thermo-mechanical pulp (HwBCTMP) were elucidated with a laboratory two-shaft kneader. Kneading treatment was performed at 30% (w/w) of pulp concentration and the number of passes through the kneader was adjusted from 0 to 10 passes. Then, changes in properties of pulp fibers were evaluated. It was found that fiber characteristics were influenced by kneading treatment. Fiber length was decreased with kneading while other morphological properties such as fiber width, curl and kink became increased as the number of passes through the kneader increased from 0 to 5 passes. The magnitude of changes in the morphological properties of softwood chemical pulp was the largest, followed by hardwood chemical pulp. The morphological properties of HwBCTMP were little influenced by kneading treatment. Swelling of fiber measured by WRV was increased with kneading except of HwBCTMP.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.106-112
• /
• 2011

The effects of alkaline treatment on the WRV, crystalline structure and sheet structure of softwood and hardwood bleached kraft pulp were investigated. Sodium hydroxide and sodium carbonate were used as chemicals for alkaline treatment and two levels of alkali dosage (5%, 10%) were applied respectively. Alkali treated and untreated pulp were refined to three levels (550, 450 and 350 mL CSF). WRV of the alkali treated pulps depended on the alkaline type and concentration. It was found that the crystalline structures of softwood and hardwood pulp were not changed by refining. Sodium carbonate and lower concentration of sodium hydroxide treatment did not caused any modification of cellulose crystalline structure, while higher concentration of sodium hydroxide treatment caused the partial modification of cellulose crystalline structure. Alkaline treatment of hardwood bleached kraft pulp led to the shrinkage of fiber diameter and bulky structure of sheet. Alkaline treatment of softwood bleached kraft pulp did not cause the significant change in fiber shrinkage and bulk of sheet.